====== FreeBSD forwarding Performance ======
{{description>Tips and information about FreeBSD forwarding performance}}
There are lot's of guide about [[http://serverfault.com/questions/64356/freebsd-performance-tuning-sysctls-loader-conf-kernel|tuning FreeBSD TCP performance]] (where the FreeBSD host is an end-point of the TCP session), but it's not the same that tunig forwarding performance (where the FreeBSD host don't have to read the TCP information of the packet being forwarded) or firewalling performance.
===== Concepts =====
==== How to bench a router ====
Benchmarking a router **is not** measuring the maximum bandwidth crossing the router, but it's about measuring the network throughput (in packets-per-second unit):
* [[http://www.ietf.org/rfc/rfc1242.txt|RFC1242: Benchmarking Terminology for Network Interconnection Devices]]
* [[http://www.ietf.org/rfc/rfc2544.txt|RFC2544: Benchmarking Methodology for Network Interconnect Devices]]
* [[http://tools.ietf.org/html/rfc3222|RFC3222: Terminology for Forwarding Information Base (FIB) based Router Performance]]
* [[http://www.ixiacom.com/pdfs/test_plans/agilent_journal_of_internet_test_methodologies.pdf|The Journal of Internet Test Methodologies]] (pdf)
==== Definition ====
Clear definition regarding some relations between the bandwidth and frame rate is mandatory:
* [[http://www.cisco.com/web/about/security/intelligence/network_performance_metrics.html|Bandwidth, Packets Per Second, and Other Network Performance Metrics]]: The relationship of bandwidth and packet forwarding rate
* [[http://wiki.networksecuritytoolkit.org/nstwiki/index.php/LAN_Ethernet_Maximum_Rates,_Generation,_Capturing_%26_Monitoring|LAN Ethernet Maximum Rates, Generation, Capturing & Monitoring]] : Give another good explanation of the Ethernet maximum rates
===== Benchmarks =====
==== Cisco or Linux ====
* [[http://www.cisco.com/web/partners/downloads/765/tools/quickreference/routerperformance.pdf|Routing performance of Cisco routers]] (PDF)
* [[http://rhelblog.redhat.com/2015/09/29/pushing-the-limits-of-kernel-networking/|Pushing the Limits of Kernel Networking]] (2015, September) : Linux RedHat 7.2: 1.3Mpps/core and "Beyond the ninth CPU we see some gain but all results are pretty much fixed at 12.4Mpps as this is the limit of the PCIe bandwidth for the device."
* [[http://www.telematica.polito.it/oldsite/courmayeur06/papers/06-A.2.1.pdf|RFC2544 Performance Evaluation for a Linux Based Open Router]] (2006, June)
* [[http://data.guug.de/slides/lk2008/10G_preso_lk2008.pdf|Towards 10Gb/s open-source routing]] (2008): Include an hardware comparison between a "real" router and a PC.
* [[https://wiki.fd.io/images/7/7b/Performance_Consideration_for_packet_processing_on_Intel_Architecture.pptx|Performance consideration for packet processing on Intel Architecture (ppt)]]
==== FreeBSD ====
Here are some benchs regarding network forwarding performance of FreeBSD (made by BSDRP team):
* AsiaBSDCon 2018 - Tuning FreeBSD for routing and firewalling ([[https://people.freebsd.org/~olivier/talks/2018_AsiaBSDCon_Tuning_FreeBSD_for_routing_and_firewalling-Paper.pdf|paper]],[[https://people.freebsd.org/~olivier/talks/2018_AsiaBSDCon_Tuning_FreeBSD_for_routing_and_firewalling-Slides.pdf|slides]] and [[https://www.youtube.com/watch?v=SLlzep0IxVY|video]])
* [[http://blog.cochard.me/2015/09/receipt-for-building-10mpps-freebsd.html|Recipe for building a 10Mpps FreeBSD based router]]
* [[https://github.com/ocochard/netbenches/blob/master/Xeon_E5-2650-8Cores-Chelsio_T540-CR/forwarding-pf-ipfw/results/fbsd11-routing.r287531/README.md|Impact of enabling ipfw or pf on fastforwarding performance with 8 cores Xeon E5-2650]]: 9.5Mpps
* [[https://github.com/ocochard/netbenches/blob/master/Xeon_L5630-4Cores-Intel_82599EB/forwarding-pf-ipfw/results/fbsd11-routing.r287531/README.md|Impact of enabling ipfw or pf on fastforwarding performance with 4 cores Xeon L5630]] : Gigabit line-rate (1.48Mpps) even with few ipfw or pf rules enabled
* [[https://github.com/ocochard/netbenches/blob/master/Atom_C2558_4Cores-Intel_i350/forwarding-pf-ipfw/results/fbsd11-routing.r287531/README.md|Impact of enabling ipfw or pf on fastforwarding performance with 4 cores Atom C2558E (Netgate RCC-VE 4860)]] : Small device perfect for 1Gb/s of IMIX traffic
* [[https://github.com/ocochard/netbenches/blob/master/AMD_G-T40E_2Cores_RTL8111E/forwarding-pf-ipfw/results/fbsd11-routing.r287531/README.md|Impact of enabling ipfw or pf on fastforwarding performance with 2 cores AMD G-T40E (PC Engines APU)]]: Another cheap router that reach about 400Mb/s of IMIX
===== Bench lab =====
The [[bench lab]] should permit to measure the pps. For obtaining accurate result the [[http://www.ietf.org/rfc/rfc2544.txt|RFC 2544 (Benchmarking Methodology for Network Interconnect Devices)]] is a good reference. If switches are used, they need to have proper configuration too, refers to the [[documentation:examples:setting_up_a_forwarding_performance_benchmark_lab|BSDRP performance lab]] for some examples.
===== Tuning =====
==== Literature ====
Here is a list of sources about optimizing/analysis forwarding performance under FreeBSD.
How to bench or tune the network stack:
* [[http://wiki.freebsd.org/NetworkPerformanceTuning | FreeBSD Network Performance Tuning]]: What need to be done to tune networking stack
* [[http://www.slideshare.net/brendangregg/meetbsd2014-performance-analysis | Brendan Gregg's Performance analysis presentation]]: The "must read" HOW TO
* [[http://www.freebsd.org/projects/netperf/index.html|FreeBSD Network Performance Project (netperf)]]
* [[http://www.watson.org/~robert/freebsd/netperf/20051027-eurobsdcon2005-netperf.pdf|Introduction to Multithreading and Multiprocessing in the FreeBSD SMPng Network Stack]], EuroBSDCon 2005 (PDF)
* [[http://www.freebsd.org/cgi/man.cgi?query=tuning&apropos=0&sektion=0&manpath=FreeBSD+8.2-RELEASE&arch=default&format=html|man tuning]] : performance tuning under FreeBSD
* [[http://wwwx.cs.unc.edu/~krishnan/classes/spring_07/os_impl/report.pdf|Improving Memory and Interrupt Processing in FreeBSD Network Stack]] (PDF)
* [[http://conferences.sigcomm.org/sigcomm/2009/workshops/presto/papers/p37.pdf|Optimizing the BSD Routing System for Parallel Processing]] (PDF)
* [[https://people.sunyit.edu/~sengupta/CSC521/systemperformance.ppt|Using netstat and vmstat for performance analysis]] (Powerpoint))
* [[http://www.freebsd.org/cgi/man.cgi?query=polling&sektion=4|polling man page]] (Warning: enabling polling is not a good idea with the new generation of Ethernet controller that include interruption control)
* [[http://info.iet.unipi.it/~luigi/polling/|Device Polling support for FreeBSD ]], the original presentation of polling implementation
* [[http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/configtuning-kernel-limits.html|Tuning Kernel Limits]] on the FreeBSD Handbook
FreeBSD Experimental high-performance network stacks:
* [[http://info.iet.unipi.it/~luigi/netmap/|Netmap - memory mapping of network devices]] //"(...)a single core running at 1.33GHz can generate the 14.8Mpps that saturate a 10GigE interface."//
* [[http://conferences.sigcomm.org/hotnets/2013/papers/hotnets-final43.pdf|Network Stack Specialization for Performance]] This paper presents Sandstorm, a clean-slate userspace network stack based on Netmap
==== Multiple flows ====
Don't try to bench a router with only one flow (same source|destination address and same source|destination port): You need to generate multiples flows.
Multi-queue NIC uses feature like [[https://en.wikipedia.org/wiki/Toeplitz_Hash_Algorithm|Toeplitz Hash Algorithm]] that balance multiples flows between all cores. Then generating only one flow will use only one NIC queue.
During your load, check that each queues are used with sysctl or with [[https://github.com/ocochard/BSDRP/blob/master/BSDRP/Files/usr/local/bin/nic-queue-usage|python script like this one]] that will display real-time usage of each queue.
On this example we can see that all flows are correctly shared between each 8 queues (about 340K paquets-per-seconds for each):
[root@router]~# nic-queue-usage cxl0
[Q0 346K/s] [Q1 343K/s] [Q2 339K/s] [Q3 338K/s] [Q4 338K/s] [Q5 338K/s] [Q6 343K/s] [Q7 346K/s] [QT 2734K/s 3269K/s -> 0K/s]
[Q0 347K/s] [Q1 344K/s] [Q2 339K/s] [Q3 339K/s] [Q4 338K/s] [Q5 338K/s] [Q6 343K/s] [Q7 346K/s] [QT 2735K/s 3277K/s -> 0K/s]
[Q0 344K/s] [Q1 341K/s] [Q2 338K/s] [Q3 338K/s] [Q4 337K/s] [Q5 337K/s] [Q6 342K/s] [Q7 345K/s] [QT 2727K/s 3262K/s -> 0K/s]
[Q0 355K/s] [Q1 352K/s] [Q2 348K/s] [Q3 349K/s] [Q4 348K/s] [Q5 347K/s] [Q6 352K/s] [Q7 355K/s] [QT 2809K/s 3381K/s -> 0K/s]
[Q0 351K/s] [Q1 348K/s] [Q2 344K/s] [Q3 343K/s] [Q4 342K/s] [Q5 344K/s] [Q6 349K/s] [Q7 352K/s] [QT 2776K/s 3288K/s -> 0K/s]
[Q0 344K/s] [Q1 341K/s] [Q2 338K/s] [Q3 339K/s] [Q4 338K/s] [Q5 338K/s] [Q6 343K/s] [Q7 346K/s] [QT 2731K/s 3261K/s -> 0K/s]
Beware of configurations setup that prevent multi-queue, like GRE,GIF,IPSec tunnels or PPPoE (= same source/destination address). If PPPoE usage is mandatory on your Gigabit Internet link, using small hardware, like 4 cores AMD GX (PC Engines APU2), will prevent to reach Gigabit speed.
==== Choosing hardware ====
=== CPU ===
Avoid NUMA architecture but prefer a CPU in only one package with maximum core (8 or 16).
If you are using NUMA, you need to check that inbound/outbound NIC queues are correctly bind to their local package to avoid useless QPI crossing.
=== Network Interface Card ===
Mellanox or Chelsio, by mixing good chipset and excellent drivers are an excellent choice.
Intel seems to have problem for managing lot's of PPS (= IRQ).
Avoid "embedded" NIC into common Dell/HP servers like these one that are very bad regarding their maximum packets-per-second performance:
* 10G Emulex OneConnect (be3)
* 10G Broadcom NetXtreme II BCM57810
==== Choosing good FreeBSD release ====
Before tuning, you need to use the good FreeBSD version... this mean a recent FreeBSD -head.
BSDRP is currently following FreeBSD 12-stable branch, to try to have a mix between recent features and stability.
==== Disabling Hyper Threading (on specific CPU only) ====
By default a multi-queue NIC drivers create one queue per core.
But on some older CPU (like Xeon E5-2650 V1) those logical cores didn't help at all for managing interrupts generated by high speed NIC.
HT can be disabled with this command:
echo 'machdep.hyperthreading_allowed="0"' >> /boot/loader.conf
Here is an example on a Xeon E5 2650 (8c,16t) and 10G Chelsio NIC where it improve performance by disabling HT:
x HT-enabled-8rxq(default): inet packets-per-second forwarded
+ HT-enabled-16rxq: inet packets-per-second forwarded
* HT-disabled-8rxq: inet packets-per-seconds forwarded
+--------------------------------------------------------------------------+
| **|
|x xx x + + + + + ***|
| |____A_____| |
| |_____AM____| |
| |A||
+--------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 5 4500078 4735822 4648451 4648293.8 94545.404
+ 5 4925106 5198632 5104512 5088362.1 102920.87
Difference at 95.0% confidence
440068 +/- 144126
9.46731% +/- 3.23827%
(Student's t, pooled s = 98821.9)
* 5 5765684 5801231.5 5783115 5785004.7 13724.265
Difference at 95.0% confidence
1.13671e+06 +/- 98524.2
24.4544% +/- 2.62824%
(Student's t, pooled s = 67554.4)
There is a benefit of about 24% to disable hyper threading on this old CPU.
But here is another example where there is a benefit to kept it enabled (and with the NIC configured to uses all the treads) on Xeon E5 2650L (10c, 20t):
x HT on, 8q (default): inet4 packets-per-second forwarded
+ HT off, 8q: inet4 packets-per-second forwarded
* HT on, 16q: inet4 packets-per-second forwarded
+--------------------------------------------------------------------------+
|x x ++ * *|
|x xx +++ * * *|
||AM| |A_| |_MA_||
+--------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 5 4265579 4433699.5 4409249.5 4359580.3 81559.4
+ 5 5257621 5443012 5372493 5372693.5 73316.243
Difference at 95.0% confidence
1.01311e+06 +/- 113098
23.2388% +/- 2.94299%
(Student's t, pooled s = 77547.4)
* 5 8566972 8917315 8734750.5 8769616.1 147186.74
Difference at 95.0% confidence
4.41004e+06 +/- 173536
101.157% +/- 5.21388%
(Student's t, pooled s = 118987)
==== fastforwarding ====
=== FreeBSD 10.3 or older ===
You should enable fastforwarding with a:
echo "net.inet.ip.fastforwarding=1" >> /etc/sysctl.conf
service sysctl restart
=== FreeBSD 12.0 or newer ===
You should enable tryforward by disabling ICMP redirect:
echo "net.inet.ip.redirect=0" >> /etc/sysctl.conf
echo "net.inet6.ip6.redirect=0" >> /etc/sysctl.conf
service sysctl restart
==== Entropy harvest impact ====
Lot's of tuning guide indicate to disable:
* kern.random.sys.harvest.ethernet
* kern.random.sys.harvest.interrupt
By default the binary mask 511 select almost all these source as entropy sources:
kern.random.harvest.mask_symbolic: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
kern.random.harvest.mask_bin: 00111111111
kern.random.harvest.mask: 511
By replacing this mask by 351, we exclude INTERRUPT and NET_ETHER:
kern.random.harvest.mask_symbolic: [UMA],[FS_ATIME],SWI,[INTERRUPT],NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
kern.random.harvest.mask_bin: 00101011111
kern.random.harvest.mask: 351
And we can notice on forwarding performance of a FreeBSD 11.1:
x PC-Engines-APU2-igb, 511 (default): inet4 packets-per-second
+ PC-Engines-APU2-igb, 351: inet4 packets-per-second
+--------------------------------------------------------------------------+
|xx x xx + + + + +|
||___M_A_____| |
| |________A_________| |
+--------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 5 724811 730197 726304 727281.6 2522.9161
+ 5 744832 755871.5 749956 750112.9 4208.7383
Difference at 95.0% confidence
22831.3 +/- 5060.46
3.13927% +/- 0.701645%
(Student's t, pooled s = 3469.77
On a PC Engines APU2, there is +3% performance benefit
x Netgate-igb, 511 (default): inet4 packets-per-second
+ Netgate-igb, 351: inet4 packets-per-second
+--------------------------------------------------------------------------+
|x x x x x ++ + + +|
||______M__A__________| |
| |_____AM___| |
+--------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 5 946426.5 965962 951906 954721.7 8435.4561
+ 5 994839 1005327 1000935 1000098.2 4620.4263
Difference at 95.0% confidence
45376.5 +/- 9918.76
4.75285% +/- 1.0771%
(Student's t, pooled s = 6800.93)
On a Netgate RCC-VE 4860 there is about 4.7% performance benefit.
Using the FreeBSD "projects/routing" branch, this impact is a lot's more important:
{{documentation:technical_docs:entropy_source_impact.png|Impact of disabling some entropy source on FreeBSD forwarding performance}}
==== NIC drivers tuning ====
=== RX & TX descriptor (queue) size on igb ===
Received (hw.igb.rxd) and transmit (hw.igb.txd) internal buffer size of igb/em NIC can be increased, but it's not a good idea.
Here are some examples that decrease performance when buffer increased:
x PC-Engine-APU2-igb, 1024 (default): inet4 packets-per-second
+ PC-Engine-APU2-igb, 2048: inet4 packets-per-second
* PC-Engine-APU2-igb, 4096: inet4 packets-per-second
+--------------------------------------------------------------------------+
|* |
|* *** + + +++ xx xx|
| MA| |
| |__AM_| |
||_A_| |
+--------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 5 724024 731531 726058 727317.6 3006.2996
+ 5 626546 640326 637463 634497.6 5856.2198
Difference at 95.0% confidence
-92820 +/- 6788.67
-12.762% +/- 0.909828%
(Student's t, pooled s = 4654.74)
* 5 577830 585426 582886 581913.4 3413.6019
Difference at 95.0% confidence
-145404 +/- 4690.94
-19.9918% +/- 0.592106%
(Student's t, pooled s = 3216.4)
On a PC Engines APU2, increasing rx&tx buffers badly impact forwarding perfomance to about 20%.
x Netgate-igb, 1024 (default): inet4 packets-per-second
+ Netgate-igb, 2048: inet4 packets-per-second
* Netaget-igb, 4096: inet4 packets-per-second
+--------------------------------------------------------------------------+
|* * * * *+ ++ + + x x x x x|
| |____MA______| |
| |___M__A______| |
| |_________A_M______| |
+--------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 5 943843 961431 950960 952699.4 7285.7808
+ 5 907050 926520 912317 915489.3 7816.85
Difference at 95.0% confidence
-37210.1 +/- 11020
-3.90575% +/- 1.13593%
(Student's t, pooled s = 7555.98)
* 5 877923 904869 894519 892616.2 10954.317
Difference at 95.0% confidence
-60083.2 +/- 13567.4
-6.30663% +/- 1.39717%
(Student's t, pooled s = 9302.68)
On a Netgate RCC-VE 4860 performance decrease to about 6%.
=== Maximum number of received packets to process at a time (Intel) ===
By default Intel drivers (em|igb) limit the maximum number of received packets to process at a time (hw.igb.rx_process_limit=100).
Disabling this limit can improve a little bit the overall performance:
x PC-Engines-APU2-igb, 100 (default): inet4 packets-per-second
+ PC-Engines-APU2-igb, disabled: inet4 packets-per-second
+--------------------------------------------------------------------------+
|x x x x x + ++ + +|
| |________________A______M_________| |
| |_____A_____| |
+--------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 5 721322 729817 727669 726175.8 3592.7624
+ 5 733327 736835 735392 735283.4 1266.5036
Difference at 95.0% confidence
9107.6 +/- 3928.6
1.25419% +/- 0.547037%
(Student's t, pooled s = 2693.69)
A small 1% improvement on a PC Engines APU2.
x Netgate-igb, 100 (default): inet4 packets-per-second
+ Netgate-igb, disabled: inet4 packets-per-second
+--------------------------------------------------------------------------+
|x x x x x + + + + +|
||______________M_____A_____________________| |
| |_____M_A_______| |
+--------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 5 943049 963053 948889 951350.1 8428.1046
+ 5 964038 971603 966764 967747.4 3168.1615
Difference at 95.0% confidence
16397.3 +/- 9285.49
1.72358% +/- 0.990789%
(Student's t, pooled s = 6366.72)
Almost same improvement, 1.7% on a Netgate.
=== Increasing maximum interrupts per second ===
By default igb|em limit the maximum number of interrupts per second to 8000.
What result by increasing this number:
x PC-Engine-APU2-igb, max_interrupt_rate=8000 (default): inet4 pps
+ PC-Engine-APU2-igb, max_interrupt_rate=16000: inet4 pps
* PC-Engine-APU2-igb, max_interrupt_rate=32000: inet4 pps
+--------------------------------------------------------------------------+
|x x + x* *+* * x+x +*|
| |_________________________MA__________________________| |
| |_____________M_____A___________________| |
| |_______M_______A_______________| |
+--------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 5 721191 730448 725919 726128.6 4137.1981
+ 5 725281 732247 727142 728045 3083.0635
No difference proven at 95.0% confidence
* 5 726157 732417 727400 728554 2518.7778
No difference proven at 95.0% confidence
No benefit on a PC Engines APU2.
x Netgate-igb, max_interrupt_rate=8000 (default): inet4 pps
+ Netgate-igb, max_interrupt_rate=16000: inet4 pps
* Netgate-igb, max_interrupt_rate=32000: inet4 pps
+--------------------------------------------------------------------------+
|x * x x* +* x + * + + * +|
| |________________MA__________________| |
| |________________A____M___________| |
| |_____________M_______A____________________| |
+--------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 5 936969.5 954851 945631 946049.3 6595.479
+ 5 947461 962965 957754 955782 6143.043
Difference at 95.0% confidence
9732.7 +/- 9295.06
1.02877% +/- 0.987938%
(Student's t, pooled s = 6373.28)
* 5 942302 960913 947667 950327.4 7504.7836
No difference proven at 95.0% confidence
A little 1% benefit if doubled form the default (8000 to 16000), but no benefit after.
=== Disabling LRO and TSO ===
All modern NIC support [[http://en.wikipedia.org/wiki/Large_receive_offload|LRO]] and [[http://en.wikipedia.org/wiki/Large_segment_offload|TSO]] features that needs to be disabled on a router:
- By waiting to store multiple packets at the NIC level before to hand them up to the stack: This add latency, and because all packets need to be sending out again, the stack have to split in different packets again before to hand them down to the NIC. [[http://downloadmirror.intel.com/22919/eng/README.txt|Intel drivers readme]] include this note "The result of not disabling LRO when combined with ip forwarding or bridging can be low throughput or even a kernel panic."
- This break the [[http://en.wikipedia.org/wiki/End-to-end_principle|End-to-end principle]]
There is no real impact of disabling these features on PPS performance:
x Xeon_E5-2650-8Cores-Chelsio_T540, TSO-LRO-enabled (default): inet4 packets-per-second
+ Xeon_E5-2650-8Cores-Chelsio_T540, TSO-LRO-disabled: inet4 packets-per-second
+--------------------------------------------------------------------------+
|x x +x + x +x + +|
| |__________________A__________________| |
| |_______________M___A__________________| |
+--------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 5 5727360 5806270.5 5773573 5773454.5 31394.005
+ 5 5771681 5848728 5803277 5810232.2 32556.338
No difference proven at 95.0% confidence
==== Where is the bottleneck ? ====
Tools:
* [[http://www.slideshare.net/brendangregg/meetbsd2014-performance-analysis|MeetBSD 2014 - Brendan Gregg's performance analysis presentation]] : The ultimate guide for performance analysis on FreeBSD
* [[http://www.freebsd.org/cgi/man.cgi?query=netstat|netstat]]: show network status
* [[http://www.freebsd.org/cgi/man.cgi?query=vmstat|vmstat]]: report virtual memory statistics
* [[http://www.freebsd.org/cgi/man.cgi?query=top|top]]: display and update information about the top cpu processes
* [[https://www.freebsd.org/cgi/man.cgi?query=pmcstat|pmcstat]]: Measuring performance using hardward counter
=== Packets load ===
Display the information regarding packet traffic, with refresh each second.
Here is a first example:
[root@hp]~# netstat -ihw1
input (Total) output
packets errs idrops bytes packets errs bytes colls
14M 0 7.9M 836M 5.8M 0 353M 0
14M 0 8.0M 841M 5.8M 0 352M 0
14M 0 8.1M 849M 5.8M 0 353M 0
14M 0 7.8M 833M 5.8M 0 352M 0
14M 0 7.9M 837M 5.8M 0 352M 0
14M 0 8.0M 843M 5.8M 0 353M 0
14M 0 7.9M 838M 5.8M 0 352M 0
=> This system is receiving 14Mpps (10G line-rate) and reach to forwarding only at 5.8Mpps rate then need to drop about 8Mpps.
=== Traffic distribution between each queues ===
Check the input queues are equally distributed. BSDRP include a sysctl parser script for that:
[root@hp]~# nic-queue-usage cxl0
[Q0 935K/s] [Q1 944K/s] [Q2 925K/s] [Q3 912K/s] [Q4 914K/s] [Q5 914K/s] [Q6 930K/s] [Q7 922K/s] [QT 7400K/s 17749K/s -> 2K/s]
[Q0 886K/s] [Q1 892K/s] [Q2 872K/s] [Q3 883K/s] [Q4 885K/s] [Q5 885K/s] [Q6 906K/s] [Q7 900K/s] [QT 7112K/s 16950K/s -> 1K/s]
[Q0 874K/s] [Q1 879K/s] [Q2 855K/s] [Q3 855K/s] [Q4 852K/s] [Q5 842K/s] [Q6 866K/s] [Q7 860K/s] [QT 6887K/s 16748K/s -> 1K/s]
[Q0 892K/s] [Q1 899K/s] [Q2 870K/s] [Q3 865K/s] [Q4 873K/s] [Q5 882K/s] [Q6 899K/s] [Q7 893K/s] [QT 7076K/s 17023K/s -> 1K/s]
[Q0 880K/s] [Q1 890K/s] [Q2 878K/s] [Q3 882K/s] [Q4 883K/s] [Q5 885K/s] [Q6 904K/s] [Q7 896K/s] [QT 7102K/s 16864K/s -> 1K/s]
[Q0 894K/s] [Q1 891K/s] [Q2 868K/s] [Q3 864K/s] [Q4 860K/s] [Q5 860K/s] [Q6 882K/s] [Q7 873K/s] [QT 6996K/s 17154K/s -> 1K/s]
[Q0 876K/s] [Q1 889K/s] [Q2 873K/s] [Q3 876K/s] [Q4 881K/s] [Q5 878K/s] [Q6 898K/s] [Q7 890K/s] [QT 7064K/s 16586K/s -> 1K/s]
[Q0 957K/s] [Q1 964K/s] [Q2 941K/s] [Q3 941K/s] [Q4 943K/s] [Q5 945K/s] [Q6 967K/s] [Q7 963K/s] [QT 7624K/s 18220K/s -> 1K/s]
[Q0 864K/s] [Q1 873K/s] [Q2 853K/s] [Q3 852K/s] [Q4 854K/s] [Q5 856K/s] [Q6 874K/s] [Q7 868K/s] [QT 6897K/s 16413K/s -> 1K/s]
=> All 8 receive queues are correctly used here.
=== Interrupt usage ===
Report on the number of interrupts taken by each device since system startup,
Here is a first example:
[root@hp]~# vmstat -i
interrupt total rate
irq1: atkbd0 6 0
irq4: uart0 3 0
irq20: ehci1 3263 3
irq21: ehci0 12612 10
cpu0:timer 749022 583
cpu6:timer 736682 573
cpu7:timer 742555 578
cpu1:timer 739964 576
cpu2:timer 739621 575
cpu5:timer 738796 575
cpu4:timer 738756 575
cpu3:timer 737954 574
irq273: igb1:que 0 1291 1
irq274: igb1:que 1 1245 1
irq275: igb1:que 2 1245 1
irq276: igb1:que 3 1246 1
irq277: igb1:que 4 1245 1
irq278: igb1:que 5 2435 2
irq279: igb1:que 6 1245 1
irq280: igb1:que 7 1245 1
irq281: igb1:link 2 0
irq283: t5nex0:evt 4 0
irq284: t5nex0:0a0 608689 474
irq285: t5nex0:0a1 281882 219
irq286: t5nex0:0a2 875179 681
irq287: t5nex0:0a3 813033 632
irq288: t5nex0:0a4 968845 754
irq289: t5nex0:0a5 1099491 855
irq290: t5nex0:0a6 58210 45
irq291: t5nex0:0a7 638755 497
irq294: t5nex0:1a0 102669 80
irq295: t5nex0:1a1 136891 106
irq296: t5nex0:1a2 51888 40
irq297: t5nex0:1a3 59324 46
irq298: t5nex0:1a4 61052 47
irq299: t5nex0:1a5 80827 63
irq300: t5nex0:1a6 88800 69
irq301: t5nex0:1a7 102177 79
Total 11978149 9318
=> There is no IRQ sharing here, and each queue have correctly their own IRQ (thanks MSI-X).
=== Memory Buffer ===
Show statistics recorded by the memory management routines. The network manages a private pool of memory buffers.
[root@hp]~# vmstat -z | head -1 ; vmstat -z | grep -i mbuf
ITEM SIZE LIMIT USED FREE REQ FAIL SLEEP
mbuf_packet: 256, 26137965, 8190, 1424, 9121, 0, 0
mbuf: 256, 26137965, 3657, 4699,4372990387, 0, 0
mbuf_cluster: 2048, 4084056, 9614, 12, 9614, 0, 0
mbuf_jumbo_page: 4096, 2042027, 16192, 131, 16207, 0, 0
mbuf_jumbo_9k: 9216, 605045, 0, 0, 0, 0, 0
mbuf_jumbo_16k: 16384, 340337, 128, 0, 128, 0, 0
=> No "failed" here.
=== CPU / NIC ===
top can give very useful information regarding the CPU/NIC affinity:
[root@hp]~# top -CHIPS
last pid: 1180; load averages: 10.05, 8.86, 5.71 up 0+00:23:58 12:05:19
187 processes: 15 running, 100 sleeping, 72 waiting
CPU 0: 0.0% user, 0.0% nice, 0.0% system, 96.9% interrupt, 3.1% idle
CPU 1: 0.0% user, 0.0% nice, 0.0% system, 99.2% interrupt, 0.8% idle
CPU 2: 0.0% user, 0.0% nice, 0.0% system, 99.6% interrupt, 0.4% idle
CPU 3: 0.0% user, 0.0% nice, 0.0% system, 97.7% interrupt, 2.3% idle
CPU 4: 0.0% user, 0.0% nice, 0.0% system, 98.1% interrupt, 1.9% idle
CPU 5: 0.0% user, 0.0% nice, 0.0% system, 97.3% interrupt, 2.7% idle
CPU 6: 0.0% user, 0.0% nice, 0.0% system, 97.7% interrupt, 2.3% idle
CPU 7: 0.0% user, 0.0% nice, 0.0% system, 97.3% interrupt, 2.7% idle
Mem: 16M Active, 16M Inact, 415M Wired, 7239K Buf, 62G Free
Swap:
PID USERNAME PRI NICE SIZE RES STATE C TIME CPU COMMAND
12 root -92 - 0K 1248K CPU1 1 13:14 100.00% intr{irq285: t5nex0:0a1}
12 root -92 - 0K 1248K CPU7 7 13:09 98.54% intr{irq284: t5nex0:0a0}
12 root -92 - 0K 1248K WAIT 3 13:10 98.21% intr{irq291: t5nex0:0a7}
12 root -92 - 0K 1248K WAIT 6 13:02 97.33% intr{irq287: t5nex0:0a3}
12 root -92 - 0K 1248K CPU0 0 13:02 97.30% intr{irq286: t5nex0:0a2}
12 root -92 - 0K 1248K CPU5 5 13:01 97.26% intr{irq288: t5nex0:0a4}
12 root -92 - 0K 1248K WAIT 4 12:59 97.19% intr{irq289: t5nex0:0a5}
12 root -92 - 0K 1248K CPU2 2 13:17 11.43% intr{irq290: t5nex0:0a6}
11 root 155 ki31 0K 128K RUN 5 11:02 2.86% idle{idle: cpu5}
11 root 155 ki31 0K 128K RUN 6 10:58 2.31% idle{idle: cpu6}
11 root 155 ki31 0K 128K RUN 3 10:52 2.11% idle{idle: cpu3}
11 root 155 ki31 0K 128K CPU4 4 10:58 2.05% idle{idle: cpu4}
11 root 155 ki31 0K 128K RUN 7 10:54 1.87% idle{idle: cpu7}
11 root 155 ki31 0K 128K RUN 0 10:54 1.72% idle{idle: cpu0}
11 root 155 ki31 0K 128K RUN 1 10:52 1.20% idle{idle: cpu1}
15 root -16 - 0K 16K - 7 0:02 0.24% rand_harvestq
0 root -92 - 0K 624K - 6 0:01 0.10% kernel{t5nex0 tq1}
11 root 155 ki31 0K 128K RUN 2 10:44 0.09% idle{idle: cpu2}
1180 root 20 0 20012K 3876K CPU4 4 0:00 0.06% top
12 root -92 - 0K 1248K WAIT 0 0:00 0.04% intr{irq301: t5nex0:1a7}
12 root -92 - 0K 1248K WAIT 6 0:00 0.03% intr{irq295: t5nex0:1a1}
12 root -92 - 0K 1248K WAIT 4 0:00 0.03% intr{irq300: t5nex0:1a6}
12 root -92 - 0K 1248K WAIT 7 0:00 0.03% intr{irq299: t5nex0:1a5}
12 root -92 - 0K 1248K WAIT 0 0:00 0.03% intr{irq294: t5nex0:1a0}
12 root -60 - 0K 1248K WAIT 1 0:00 0.02% intr{swi4: clock (0)}
12 root -92 - 0K 1248K WAIT 4 0:00 0.02% intr{irq296: t5nex0:1a2}
12 root -92 - 0K 1248K WAIT 0 0:00 0.02% intr{irq298: t5nex0:1a4}
12 root -92 - 0K 1248K WAIT 0 0:00 0.01% intr{irq297: t5nex0:1a3}
1090 root 20 0 56296K 6384K select 3 0:00 0.00% sshd
14 root -68 - 0K 240K - 6 0:00 0.00% usb{usbus2}
14 root -68 - 0K 240K - 6 0:00 0.00% usb{usbus2}
14 root -68 - 0K 240K - 6 0:00 0.00% usb{usbus0}
12 root -88 - 0K 1248K WAIT 6 0:00 0.00% intr{irq20: ehci1}
12 root -92 - 0K 1248K WAIT 5 0:00 0.00% intr{irq278: igb1:que 5}
14 root -68 - 0K 240K - 6 0:00 0.00% usb{usbus0}
12 root -88 - 0K 1248K WAIT 6 0:00 0.00% intr{irq21: ehci0}
14 root -68 - 0K 240K - 1 0:00 0.00% usb{usbus1}
18 root -16 - 0K 48K psleep 5 0:00 0.00% pagedaemon{pagedaemon}
24 root 16 - 0K 16K syncer 0 0:00 0.00% syncer
21 root -16 - 0K 16K - 5 0:00 0.00% bufspacedaemon
23 root -16 - 0K 16K vlruwt 7 0:00 0.00% vnlru
=== Drivers ===
Depending the NIC drivers used, there are some counters available:
[root@hp]~# sysctl dev.cxl.0.stats.
dev.cxl.0.stats.rx_ovflow2: 0
dev.cxl.0.stats.rx_ovflow1: 0
dev.cxl.0.stats.rx_ovflow0: 7301719197
dev.cxl.0.stats.rx_ppp7: 0
dev.cxl.0.stats.rx_ppp6: 0
dev.cxl.0.stats.rx_ppp5: 0
dev.cxl.0.stats.rx_ppp4: 0
dev.cxl.0.stats.rx_ppp3: 0
dev.cxl.0.stats.rx_ppp2: 0
dev.cxl.0.stats.rx_ppp1: 0
dev.cxl.0.stats.rx_ppp0: 0
dev.cxl.0.stats.rx_pause: 0
dev.cxl.0.stats.rx_frames_1519_max: 0
dev.cxl.0.stats.rx_frames_1024_1518: 0
dev.cxl.0.stats.rx_frames_512_1023: 0
dev.cxl.0.stats.rx_frames_256_511: 0
dev.cxl.0.stats.rx_frames_128_255: 0
dev.cxl.0.stats.rx_frames_65_127: 0
dev.cxl.0.stats.rx_frames_64: 12522860904
(...)
[root@hp]~# sysctl -d dev.cxl.0.stats.rx_ovflow0
dev.cxl.0.stats.rx_ovflow0: # drops due to buffer-group 0 overflows
=> Notice the high level of "drops du to buffer-group 0 overflows".
It's a problem regarding global performance of the system (on this example, the packet generator send smallest packet at a rate about 14Mpps).
=== pmcstat ===
During high-load of your router/firewall, load the [[https://www.freebsd.org/cgi/man.cgi?query=hwpmc&sektion=4|hwpmc(4)]] module:
kldload hwpmc
== Time used by process ==
Now you can display the most time consumed process with:
* AMD: ls_not_halted_cyc
* Intel: cpu_clk_unhalted.thread_p
* ARM: CPU_CYCLES
pmcstat -TS cpu_clk_unhalted.thread_p -w1
That will display this output:
PMC: [INSTR_RETIRED_ANY] Samples: 56877 (100.0%) , 0 unresolved
%SAMP IMAGE FUNCTION CALLERS
7.2 kernel bzero m_pkthdr_init:2.4 ip_findroute:1.8 ip_tryforward:1.6 fib4_lookup_nh_basic:1.3
6.1 if_cxgbe.k eth_tx drain_ring
5.9 kernel bcopy eth_tx:2.3 arpresolve:1.9 get_scatter_segment:1.7
4.5 kernel atomic_cmpset_long mp_ring_enqueue:2.5 drain_ring:2.0
3.7 kernel __rw_rlock arpresolve:2.7 fib4_lookup_nh_basic:1.0
3.4 kernel rn_match fib4_lookup_nh_basic
3.3 kernel ip_tryforward ip_input
3.2 kernel _rw_runlock_cookie fib4_lookup_nh_basic:2.2 arpresolve:1.0
2.9 if_cxgbe.k reclaim_tx_descs eth_tx
2.9 if_cxgbe.k service_iq t4_intr
2.9 kernel ether_output ip_tryforward
2.8 kernel ether_nh_input netisr_dispatch_src
2.8 if_cxgbe.k cxgbe_transmit ether_output
2.8 kernel netisr_dispatch_src ether_demux:1.7 ether_input:1.1
2.7 kernel uma_zalloc_arg get_scatter_segment
2.5 kernel _rm_rlock in_localip
2.4 if_cxgbe.k t4_eth_rx service_iq
2.3 if_cxgbe.k parse_pkt cxgbe_transmit
2.3 kernel memcpy ether_output
2.2 kernel uma_zfree_arg m_freem
2.1 kernel spinlock_exit ether_nh_input
2.0 kernel fib4_lookup_nh_basic ip_findroute
2.0 kernel ip_input netisr_dispatch_src
2.0 if_cxgbe.k get_scatter_segment service_iq
1.9 kernel __mtx_lock_flags eth_tx
1.8 kernel __mtx_unlock_flags eth_tx
1.6 kernel random_harvest_queue ether_nh_input
1.4 if_cxgbe.k mp_ring_enqueue cxgbe_transmit
1.1 kernel bcmp ether_nh_input
1.1 kernel critical_enter
1.1 kernel key_havesp ipsec4_capability
1.0 kernel m_adj ether_demux
1.0 kernel ipsec4_capability ip_input
1.0 kernel in_localip ip_tryforward
0.9 kernel pmap_kextract parse_pkt
0.7 kernel ether_demux ether_nh_input
0.7 kernel arpresolve ether_output
0.7 kernel _rm_runlock in_localip
0.7 kernel sglist_count parse_pkt
0.6 kernel lock_delay _mtx_lock_spin_cookie
0.6 kernel critical_exit
On this case the bootleneck is just the network stack (most of the time spend into function ip_findroute called by ip_tryforward).
== CPU cycles spent ==
For displaying where the most cpu cycles are being spent with.
We first need a partition with about 200MB that include the debug kernel:
system expand-data-slice
mount /data
Then, under high-load, start collecting during about 20 seconds:
pmcstat -z 50 -S cpu_clk_unhalted.thread -l 20 -O /data/pmc.out
pmcstat -R /data/pmc.out -z50 -G /data/pmc.stacks
less /data/pmc.stacks
=== Lock contention source ===
To identifying lock contention source (like if function lock_delay or __mtx_lock_sleep was quite high from the pcm output), you can try to search which lock is contended and why with lockstat.
You can generate 2 output:
* contented locks broken down by type: lockstat -x aggsize=4m sleep 10 > lock-type.txt
* stacks associated with the lock contention to identify the source: lockstat -x aggsize=4m -s 10 sleep 10 > lock-stacks.txt