Differences

This shows you the differences between two versions of the page.

--- documentation:end-users_docs [2019/01/29 19:35] – external edit 127.0.0.1
+++ documentation:end-users_docs [2019/06/04 15:23] – [Hardware Compatibility List] olivier
@@ Line 5: / Line 5: @@
 For BSDRP you need:
-  * a 1GB flash disk (Compact Flash, USB stick, mSATA flash module, etc.).
+  * a 2GB flash disk (Compact Flash, USB stick, mSATA flash module, etc.).
-  * a minimum of 256MB RAM.
+  * a minimum of 512MB RAM.
 [[http://www.freebsd.org/releases/10.3R/hardware.html|All hardware supported by FreeBSD 10.3]] are supported by BSDRP with the exception of following drivers:
@@ Line 114: / Line 114: @@
 === Special notes for PC-Engines ===
-==  WRAP platform ==
-The FreeBSD (BSDRP) bootloader default configuration isn't compatible with the WRAP: You need to change the bootloader mode before to use it on a WRAP platform.
-From a FreeBSD host, once you had installed the image on your CF, change the bootloader mode (replace daX by your device):
-<code>
-boot0cfg -o nopacket /dev/daX
-</code>
-<note warning>Upgrading BSDRP on WRAP is not possible: The PC-Engines WRAP is not able to boot from the second partition (BIOS limitation)</note>
 ==  Alix platform ==