User Tools

Site Tools


documentation:end-users_docs

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
documentation:end-users_docs [2020/01/02 19:40] – [Hardware Compatibility List] olivierdocumentation:end-users_docs [2020/01/11 00:38] – [Syslog] olivier
Line 410: Line 410:
 BSDRP v1.4 and earlier have a default configuration that prevent remote syslog. This behavior can be changed by editing /etc/rc.conf.misc and replacing syslogd_flags="-ss" by syslogd_falgs="-s" BSDRP v1.4 and earlier have a default configuration that prevent remote syslog. This behavior can be changed by editing /etc/rc.conf.misc and replacing syslogd_flags="-ss" by syslogd_falgs="-s"
 </note> </note>
 +
 +==== Firmware Upgrade ====
 +
 +=== Mellanox ===
 +
 +Stat by identifying your NIC ID:
 +<code>
 +# mstfwmanager
 +Querying Mellanox devices firmware ...
 +
 +Device #1:
 +----------
 +
 +  Device Type:      ConnectX4
 +  Part Number:      MCX416A-CCA_Ax
 +  Description:      ConnectX-4 EN network interface card; 100GbE dual-port QSFP28; PCIe3.0 x16; ROHS R6
 +  PSID:             MT_2150110033
 +  PCI Device Name:  pci0:2:0:0
 +  Base GUID:        e41d2d0300fdbd90
 +  Base MAC:         e41d2dfdbd90
 +  Versions:         Current        Available
 +     FW             12.26.1040     N/A
 +     PXE            3.5.0803       N/A
 +     UEFI           14.19.0014     N/A
 +
 +  Status:           No matching image found
 +</code>
 +
 +Then go to the [[https://www.mellanox.com/page/firmware_download|Mellanox firmware web site]] in section "Device Type" -> "Part Number" -> "PSID", then fetch it into your BSDRP and upgrade it:
 +
 +<code>
 +# mount /data
 +# cd /data
 +# fetch http://www.mellanox.com/downloads/firmware/fw-ConnectX4-rel-12_26_4012-MCX416A-CCA_Ax-UEFI-14.19.17-FlexBoot-3.5.805.bin.zip
 +# unzip fw-ConnectX4-rel-12_26_4012-MCX416A-CCA_Ax-UEFI-14.19.17-FlexBoot-3.5.805.bin.zip
 +# mstfwmanager -u -i fw-ConnectX4-rel-12_26_4012-MCX416A-CCA_Ax-UEFI-14.19.17-FlexBoot-3.5.805.bin
 +Querying Mellanox devices firmware ...
 +
 +Device #1:
 +----------
 +
 +  Device Type:      ConnectX4
 +  Part Number:      MCX416A-CCA_Ax
 +  Description:      ConnectX-4 EN network interface card; 100GbE dual-port QSFP28; PCIe3.0 x16; ROHS R6
 +  PSID:             MT_2150110033
 +  PCI Device Name:  pci0:2:0:0
 +  Base GUID:        e41d2d0300fdbd90
 +  Base MAC:         e41d2dfdbd90
 +  Versions:         Current        Available
 +     FW             12.26.1040     12.26.4012
 +     PXE            3.5.0803       3.5.0805
 +     UEFI           14.19.0014     14.19.0017
 +
 +  Status:           Update required
 +
 +---------
 +Found 1 device(s) requiring firmware update...
 +
 +Perform FW update? [y/N]: y
 +Device #1: Updating FW ...
 +Initializing image partition -   OK
 +Writing Boot image component -   OK
 +Done
 +
 +Restart needed for updates to take effect.
 +</code> 
 +
 +
  
 ===== Debugging ===== ===== Debugging =====
documentation/end-users_docs.txt · Last modified: 2021/02/23 12:01 by olivier

Except where otherwise noted, content on this wiki is licensed under the following license: BSD 2-Clause
Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki