Differences

This shows you the differences between two versions of the page.

--- documentation:examples:aggregating_multiple_isp_links_with_mlvpn [2020/02/21 21:39] – [Backbone routers configuration] olivier
+++ documentation:examples:aggregating_multiple_isp_links_with_mlvpn [2020/02/21 21:40] – [Router 5 : MLVPN server] olivier
@@ Line 252: / Line 252: @@
 </code>
-==== Router 5 : MLVPN server ====
+==== Router 6 : MLVPN server ====
-Router 5 is configured as a aggregating server.
+Router 6 is configured as a aggregating server.
 <code>
-sysrc hostname=R5
+sysrc hostname=VM6 \
-sysrc cloned_interfaces="lo1"
+        cloned_interfaces="lo1" \
-sysrc ifconfig_lo1="inet 10.5.5.5/32"
+        ifconfig_lo1="inet 10.6.6.6/32" \
-sysrc ifconfig_vtnet3="10.0.45.5/24"
+        ifconfig_vtnet4="inet 10.0.56.6/24" \
-sysrc defaultrouter=10.0.45.4
+        defaultrouter="10.0.56.5"
-sysrc mlvpn_enable=YES
+cat > /usr/local/etc/mlvpn/mlvpn.conf <<EOF
-cat <<'EOF' > /usr/local/etc/mlvpn/mlvpn.conf
 [general]
 statuscommand = "/usr/local/etc/mlvpn/mlvpn_updown.sh"
 tuntap = "tun"
 mode = "server"
-ip4 = "10.0.15.5/30"
+ip4 = "10.0.16.2/30"
-ip4_gateway = "10.0.15.1"
+ip4_gateway = "10.0.16.1"
 ip4_routes = "10.1.1.1/32"
 timeout = 30
@@ Line 278: / Line 276: @@
 [adsl2]
-bindhost = "10.0.45.5"
+bindhost = "10.0.56.6"
 bindport = 5082
 [adsl3]
-bindhost = "10.0.45.5"
+bindhost = "10.0.56.6"
 bindport = 5083
-'EOF'
+[adsl4]
+bindhost = "10.0.56.6"
+bindport = 5084
+EOF
+service mlvpn enable
 service netif restart
 service routing restart
 service mlvpn start
+hostname VM6
 config save
 </code>