BSD Router Project

User Tools

Site Tools

Trace:
documentation:examples:bgp_route_reflector_and_confederation_using_quagga_and_bird

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Next revisionBoth sides next revision
documentation:examples:bgp_route_reflector_and_confederation_using_quagga_and_bird [2019/08/10 15:28] – [Router 4] olivierdocumentation:examples:bgp_route_reflector_and_confederation_using_quagga_and_bird [2021/03/22 21:14] – [Router 4] olivier
Line 870: Line 870:
  bgp confederation identifier 200  bgp confederation identifier 200
  bgp confederation peers 65535  bgp confederation peers 65535
 + no bgp ebgp-requires-policy
  no bgp default ipv4-unicast  no bgp default ipv4-unicast
  neighbor 10.0.2.3 remote-as 100  neighbor 10.0.2.3 remote-as 100
Line 954: Line 955:
 sysrc hostname=R5 sysrc hostname=R5
 sysrc frr_enable=YES sysrc frr_enable=YES
-hostname R5 +cat <<EOF > /usr/local/etc/frr/frr.conf 
-service frr start +log syslog
-cli +
-conf t+
 interface vtnet3 interface vtnet3
  ip address 10.0.3.5/24  ip address 10.0.3.5/24
  ipv6 address 2001:db8:3::5/64  ipv6 address 2001:db8:3::5/64
 +!
 interface vtnet4 interface vtnet4
  ip address 10.0.4.5/24  ip address 10.0.4.5/24
Line 973: Line 973:
  neighbor 2001:db8:3::4 remote-as 64512  neighbor 2001:db8:3::4 remote-as 64512
  neighbor 2001:db8:4::6 remote-as 65535  neighbor 2001:db8:4::6 remote-as 65535
 + !
  address-family ipv4 unicast  address-family ipv4 unicast
   network 10.0.3.0/24   network 10.0.3.0/24
Line 983: Line 984:
   no neighbor 2001:db8:4::6 activate   no neighbor 2001:db8:4::6 activate
  exit-address-family  exit-address-family
 + !
  address-family ipv6 unicast  address-family ipv6 unicast
   network 2001:db8:3::/64   network 2001:db8:3::/64
Line 991: Line 993:
   neighbor 2001:db8:4::6 next-hop-self   neighbor 2001:db8:4::6 next-hop-self
  exit-address-family  exit-address-family
- exit +EOF 
-exit +hostname R5 
-wr +service frr start
-exit+
 config save config save
 </code> </code>
Line 1054: Line 1055:
 sysrc ipsec_file="/etc/ipsec.conf" sysrc ipsec_file="/etc/ipsec.conf"
 sysrc frr_enable=YES sysrc frr_enable=YES
-service frr start 
 cat <<EOF > /etc/ipsec.conf cat <<EOF > /etc/ipsec.conf
 flush ; flush ;
Line 1063: Line 1063:
 EOF EOF
 service ipsec start service ipsec start
-cli +cat <<EOF > /usr/local/etc/frr/frr.conf 
-conf t+log syslog
 interface vtnet4 interface vtnet4
  ip address 10.0.4.6/24  ip address 10.0.4.6/24
  ipv6 address 2001:db8:4::6/64  ipv6 address 2001:db8:4::6/64
 +!
 interface vtnet5 interface vtnet5
  ip address 10.0.5.6/24  ip address 10.0.5.6/24
Line 1082: Line 1083:
  neighbor 2001:db8:5::7 remote-as 65535  neighbor 2001:db8:5::7 remote-as 65535
  neighbor 2001:db8:5::7 password abcdefgh  neighbor 2001:db8:5::7 password abcdefgh
 + !
  address-family ipv4 unicast  address-family ipv4 unicast
   network 10.0.5.0/24   network 10.0.5.0/24
Line 1091: Line 1093:
   no neighbor 2001:db8:5::7 activate   no neighbor 2001:db8:5::7 activate
  exit-address-family  exit-address-family
 + !
  address-family ipv6 unicast  address-family ipv6 unicast
   network 2001:db8:5::/64   network 2001:db8:5::/64
Line 1098: Line 1101:
   neighbor 2001:db8:5::7 next-hop-self   neighbor 2001:db8:5::7 next-hop-self
  exit-address-family  exit-address-family
- exit +EOF 
-exit +service frr start
-wr +
-exit+
 config save config save
 </code> </code>
Line 1164: Line 1165:
 sysrc ipsec_file="/etc/ipsec.conf" sysrc ipsec_file="/etc/ipsec.conf"
 sysrc frr_enable=YES sysrc frr_enable=YES
-service frr start 
 cat <<EOF > /etc/ipsec.conf cat <<EOF > /etc/ipsec.conf
 flush ; flush ;
Line 1173: Line 1173:
 EOF EOF
 service ipsec start service ipsec start
-cli +cat <<EOF > /usr/local/etc/frr/frr.conf 
-conf t+log syslog
 interface vtnet0 interface vtnet0
  ip address 10.0.7.7/24  ip address 10.0.7.7/24
  ipv6 address 2001:db8:7::7/64  ipv6 address 2001:db8:7::7/64
 +!
 interface vtnet5 interface vtnet5
  ip address 10.0.5.7/24  ip address 10.0.5.7/24
Line 1185: Line 1186:
  bgp confederation identifier 200  bgp confederation identifier 200
  bgp confederation peers 64512  bgp confederation peers 64512
 + no bgp default ipv4-unicast
  neighbor 10.0.5.6 remote-as 65535  neighbor 10.0.5.6 remote-as 65535
  neighbor 10.0.5.6 password abcdefgh  neighbor 10.0.5.6 password abcdefgh
  neighbor 2001:db8:5::6 remote-as 65535  neighbor 2001:db8:5::6 remote-as 65535
  neighbor 2001:db8:5::6 password abcdefgh  neighbor 2001:db8:5::6 password abcdefgh
 + !
  address-family ipv4 unicast  address-family ipv4 unicast
   network 10.0.5.0/24   network 10.0.5.0/24
Line 1194: Line 1197:
   neighbor 10.0.5.6 activate   neighbor 10.0.5.6 activate
   no neighbor 2001:db8:5::6 activate   no neighbor 2001:db8:5::6 activate
-  exit-address-family+ exit-address-family 
 + !
  address-family ipv6 unicast  address-family ipv6 unicast
   network 2001:db8:5::/64   network 2001:db8:5::/64
   network 2001:db8:7::/64   network 2001:db8:7::/64
   neighbor 2001:db8:5::6 activate   neighbor 2001:db8:5::6 activate
-  exit-address-family + exit-address-family 
- exit +EOF 
-exit +service frr start
-wr +
-exit+
 config save config save
 </code> </code>
documentation/examples/bgp_route_reflector_and_confederation_using_quagga_and_bird.txt · Last modified: 2021/03/22 21:15 by olivier
Except where otherwise noted, content on this wiki is licensed under the following license: BSD 2-Clause
Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki