User Tools

Site Tools


documentation:examples:dropping_packets_at_high_rate

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
documentation:examples:dropping_packets_at_high_rate [2020/02/07 16:36] – [Performance impact] olivierdocumentation:examples:dropping_packets_at_high_rate [2020/02/07 16:59] – [Using Chelsio's TCAM firewall] olivier
Line 165: Line 165:
 </code> </code>
  
-To improve the TCAM performance for a filtering usage, all unused "regions" will be disabled to kept only the route and filter.+To improve the TCAM performance for a filtering usage, all unused "regions" will be disabled to kept only the route and filter (32 entries for route + 2016 for filter = 2048 total).
  
 For that we need to download a [[https://svnweb.freebsd.org/base/head/sys/dev/cxgbe/firmware/t5fw_cfg_hashfilter.txt?view=co|default TCAM firmware configuration file for our T5 NIC]] to modify its parameters then load the modified configuration into the NIC flash and instruct the NIC to use the file from its flash. For that we need to download a [[https://svnweb.freebsd.org/base/head/sys/dev/cxgbe/firmware/t5fw_cfg_hashfilter.txt?view=co|default TCAM firmware configuration file for our T5 NIC]] to modify its parameters then load the modified configuration into the NIC flash and instruct the NIC to use the file from its flash.
documentation/examples/dropping_packets_at_high_rate.txt · Last modified: 2024/02/09 09:42 by olivier

Except where otherwise noted, content on this wiki is licensed under the following license: BSD 2-Clause
Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki