BSD Router Project

User Tools

Site Tools

Trace:
documentation:examples:ibm_system_x3550_m3
no way to compare when less than two revisions

Differences

This shows you the differences between two versions of the page.


—documentation:examples:ibm_system_x3550_m3 [2013/09/19 22:20] (current) – created - external edit 127.0.0.1
Line 1: Line 1:
 +====== IBM System x3550 M3 ======
  
 +==== dmesg ====
 +
 +<code>
 +Copyright (c) 1992-2013 The FreeBSD Project.
 +Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 +        The Regents of the University of California. All rights reserved.
 +FreeBSD is a registered trademark of The FreeBSD Foundation.
 +FreeBSD 9.2-RC4 #0 r255473M: Sat Sep 14 22:53:03 CEST 2013
 +    root@orange.bsdrp.net:/usr/obj/BSDRP.amd64/usr/local/BSDRP/BSDRP/FreeBSD/src/sys/amd64 amd64
 +gcc version 4.2.1 20070831 patched [FreeBSD]
 +CPU: Intel(R) Xeon(R) CPU           L5630  @ 2.13GHz (2133.45-MHz K8-class CPU)
 +  Origin = "GenuineIntel"  Id = 0x206c2  Family = 0x6  Model = 0x2c  Stepping = 2
 +  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
 +  Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
 +  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
 +  AMD Features2=0x1<LAHF>
 +  TSC: P-state invariant, performance statistics
 +real memory  = 17179869184 (16384 MB)
 +avail memory = 16475496448 (15712 MB)
 +Event timer "LAPIC" quality 600
 +ACPI APIC Table: <IBM    THURLEY >
 +FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 +FreeBSD/SMP: 1 package(s) x 4 core(s)
 + cpu0 (BSP): APIC ID:  0
 + cpu1 (AP): APIC ID:  2
 + cpu2 (AP): APIC ID: 18
 + cpu3 (AP): APIC ID: 20
 +ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20110527/tbfadt-638)
 +ioapic0 <Version 2.0> irqs 0-23 on motherboard
 +ioapic1 <Version 2.0> irqs 24-47 on motherboard
 +netmap: loaded module
 +cryptosoft0: <software crypto> on motherboard
 +acpi0: <IBM THURLEY> on motherboard
 +acpi0: Power Button (fixed)
 +Timecounter "HPET" frequency 14318180 Hz quality 950
 +Event timer "HPET" frequency 14318180 Hz quality 450
 +Event timer "HPET1" frequency 14318180 Hz quality 440
 +Event timer "HPET2" frequency 14318180 Hz quality 440
 +Event timer "HPET3" frequency 14318180 Hz quality 440
 +cpu0: <ACPI CPU> on acpi0
 +cpu1: <ACPI CPU> on acpi0
 +cpu2: <ACPI CPU> on acpi0
 +cpu3: <ACPI CPU> on acpi0
 +atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
 +atrtc0: Warning: Couldn't map I/O.
 +Event timer "RTC" frequency 32768 Hz quality 0
 +attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
 +Timecounter "i8254" frequency 1193182 Hz quality 0
 +Event timer "i8254" frequency 1193182 Hz quality 100
 +Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
 +acpi_timer0: <24-bit timer at 3.579545MHz> port 0x588-0x58b on acpi0
 +pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 +pcib0: Length mismatch for 3 range: 1 vs 8100000000
 +pci0: <ACPI PCI bus> on pcib0
 +pcib1: <ACPI PCI-PCI bridge> irq 28 at device 1.0 on pci0
 +pci11: <ACPI PCI bus> on pcib1
 +bce0: <Broadcom NetXtreme II BCM5709 1000Base-T (C0)> mem 0x92000000-0x93ffffff irq 28 at device 0.0 on pci11
 +miibus0: <MII bus> on bce0
 +brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0
 +brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
 +bce0: Ethernet address: 5c:f3:fc:e5:a2:f8
 +bce0: ASIC (0x57092003); Rev (C0); Bus (PCIe x2, 5Gbps); B/C (6.2.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.11)
 +Coal (RX:6,6,18,18; TX:20,20,80,80)
 +bce1: <Broadcom NetXtreme II BCM5709 1000Base-T (C0)> mem 0x94000000-0x95ffffff irq 40 at device 0.1 on pci11
 +miibus1: <MII bus> on bce1
 +brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1
 +brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
 +bce1: Ethernet address: 5c:f3:fc:e5:a2:fa
 +bce1: ASIC (0x57092003); Rev (C0); Bus (PCIe x2, 5Gbps); B/C (6.2.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.11)
 +Coal (RX:6,6,18,18; TX:20,20,80,80)
 +pcib2: <PCI-PCI bridge> irq 29 at device 2.0 on pci0
 +pci16: <PCI bus> on pcib2
 +pcib3: <ACPI PCI-PCI bridge> irq 24 at device 3.0 on pci0
 +pci21: <ACPI PCI bus> on pcib3
 +ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> mem 0xfbc00000-0xfbdfffff,0xfbe04000-0xfbe07fff irq 34 at device 0.0 on pci21
 +ix0: Using MSIX interrupts with 5 vectors
 +ix0: Ethernet address: a0:36:9f:1e:1e:d8
 +ix0: PCI Express Bus: Speed 5.0GT/s Width x8
 +001.000007 netmap_attach [1696] success for ix0
 +ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> mem 0xfba00000-0xfbbfffff,0xfbe00000-0xfbe03fff irq 24 at device 0.1 on pci21
 +ix1: Using MSIX interrupts with 5 vectors
 +ix1: Ethernet address: a0:36:9f:1e:1e:da
 +ix1: PCI Express Bus: Speed 5.0GT/s Width x8
 +001.000008 netmap_attach [1696] success for ix1
 +pcib4: <ACPI PCI-PCI bridge> irq 30 at device 7.0 on pci0
 +pci26: <ACPI PCI bus> on pcib4
 +igb0: <Intel(R) PRO/1000 Network Connection version - 2.3.10> mem 0x97b80000-0x97bfffff,0x97c0c000-0x97c0ffff irq 30 at device 0.0 on pci26
 +igb0: Using MSIX interrupts with 5 vectors
 +igb0: Ethernet address: 00:1b:21:d4:3f:28
 +igb0: Bound queue 0 to cpu 0
 +igb0: Bound queue 1 to cpu 1
 +igb0: Bound queue 2 to cpu 2
 +igb0: Bound queue 3 to cpu 3
 +001.000009 netmap_attach [1696] success for igb0
 +igb1: <Intel(R) PRO/1000 Network Connection version - 2.3.10> mem 0x97b00000-0x97b7ffff,0x97c08000-0x97c0bfff irq 37 at device 0.1 on pci26
 +igb1: Using MSIX interrupts with 5 vectors
 +igb1: Ethernet address: 00:1b:21:d4:3f:29
 +igb1: Bound queue 0 to cpu 0
 +igb1: Bound queue 1 to cpu 1
 +igb1: Bound queue 2 to cpu 2
 +igb1: Bound queue 3 to cpu 3
 +001.000010 netmap_attach [1696] success for igb1
 +igb2: <Intel(R) PRO/1000 Network Connection version - 2.3.10> mem 0x97a80000-0x97afffff,0x97c04000-0x97c07fff irq 39 at device 0.2 on pci26
 +igb2: Using MSIX interrupts with 5 vectors
 +igb2: Ethernet address: 00:1b:21:d4:3f:2a
 +igb2: Bound queue 0 to cpu 0
 +igb2: Bound queue 1 to cpu 1
 +igb2: Bound queue 2 to cpu 2
 +igb2: Bound queue 3 to cpu 3
 +001.000011 netmap_attach [1696] success for igb2
 +igb3: <Intel(R) PRO/1000 Network Connection version - 2.3.10> mem 0x97a00000-0x97a7ffff,0x97c00000-0x97c03fff irq 38 at device 0.3 on pci26
 +igb3: Using MSIX interrupts with 5 vectors
 +igb3: Ethernet address: 00:1b:21:d4:3f:2b
 +igb3: Bound queue 0 to cpu 0
 +igb3: Bound queue 1 to cpu 1
 +igb3: Bound queue 2 to cpu 2
 +igb3: Bound queue 3 to cpu 3
 +001.000012 netmap_attach [1696] success for igb3
 +pci0: <base peripheral, interrupt controller> at device 16.0 (no driver attached)
 +pci0: <base peripheral, interrupt controller> at device 16.1 (no driver attached)
 +pci0: <base peripheral, interrupt controller> at device 17.0 (no driver attached)
 +pci0: <base peripheral, interrupt controller> at device 17.1 (no driver attached)
 +pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
 +pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
 +pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
 +pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
 +pci0: <base peripheral> at device 22.0 (no driver attached)
 +pci0: <base peripheral> at device 22.1 (no driver attached)
 +pci0: <base peripheral> at device 22.2 (no driver attached)
 +pci0: <base peripheral> at device 22.3 (no driver attached)
 +pci0: <base peripheral> at device 22.4 (no driver attached)
 +pci0: <base peripheral> at device 22.5 (no driver attached)
 +pci0: <base peripheral> at device 22.6 (no driver attached)
 +pci0: <base peripheral> at device 22.7 (no driver attached)
 +uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0x20a0-0x20bf irq 17 at device 26.0 on pci0
 +usbus0 on uhci0
 +uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0x2080-0x209f irq 18 at device 26.1 on pci0
 +usbus1 on uhci1
 +ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0x97d21000-0x97d213ff irq 19 at device 26.7 on pci0
 +usbus2: EHCI version 1.0
 +usbus2 on ehci0
 +pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
 +pci1: <ACPI PCI bus> on pcib5
 +mpt0: <LSILogic SAS/SATA Adapter> port 0x1000-0x10ff mem 0x97910000-0x97913fff,0x97900000-0x9790ffff irq 16 at device 0.0 on pci1
 +mpt0: MPI Version=1.5.20.0
 +mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
 +mpt0: 1 Active Volume (2 Max)
 +mpt0: 2 Hidden Drive Members (14 Max)
 +pcib6: <PCI-PCI bridge> irq 16 at device 28.4 on pci0
 +pci6: <PCI bus> on pcib6
 +pcib7: <PCI-PCI bridge> irq 16 at device 0.0 on pci6
 +pci7: <PCI bus> on pcib7
 +vgapci0: <VGA-compatible display> mem 0x96000000-0x96ffffff,0x97800000-0x97803fff,0x97000000-0x977fffff irq 16 at device 0.0 on pci7
 +uhci2: <Intel 82801JI (ICH10) USB controller USB-A> port 0x2060-0x207f irq 17 at device 29.0 on pci0
 +usbus3 on uhci2
 +uhci3: <Intel 82801JI (ICH10) USB controller USB-B> port 0x2040-0x205f irq 18 at device 29.1 on pci0
 +usbus4 on uhci3
 +uhci4: <Intel 82801JI (ICH10) USB controller USB-C> port 0x2020-0x203f irq 19 at device 29.2 on pci0
 +usbus5 on uhci4
 +ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0x97d20000-0x97d203ff irq 17 at device 29.7 on pci0
 +usbus6: EHCI version 1.0
 +usbus6 on ehci1
 +pcib8: <PCI-PCI bridge> at device 30.0 on pci0
 +pci31: <PCI bus> on pcib8
 +isab0: <PCI-ISA bridge> at device 31.0 on pci0
 +isa0: <ISA bus> on isab0
 +atapci0: <Intel ICH10 SATA300 controller> port 0x2118-0x211f,0x212c-0x212f,0x2110-0x2117,0x2128-0x212b,0x20f0-0x20ff,0x20e0-0x20ef irq 16 at device 31.2 on pci0
 +ata2: <ATA channel> at channel 0 on atapci0
 +ata3: <ATA channel> at channel 1 on atapci0
 +pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
 +atapci1: <Intel ICH10 SATA300 controller> port 0x2108-0x210f,0x2124-0x2127,0x2100-0x2107,0x2120-0x2123,0x20d0-0x20df,0x20c0-0x20cf irq 21 at device 31.5 on pci0
 +ata4: <ATA channel> at channel 0 on atapci1
 +ata5: <ATA channel> at channel 1 on atapci1
 +uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
 +uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
 +qpi0: <QPI system bus> on motherboard
 +pcib9: <QPI Host-PCI bridge> pcibus 255 on qpi0
 +pci255: <PCI bus> on pcib9
 +orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
 +sc0: <System console> at flags 0x100 on isa0
 +sc0: VGA <16 virtual consoles, flags=0x300>
 +vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 +atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
 +atkbd0: <AT Keyboard> irq 1 on atkbdc0
 +atkbd0: [GIANT-LOCKED]
 +est0: <Enhanced SpeedStep Frequency Control> on cpu0
 +est: CPU supports Enhanced Speedstep, but is not recognized.
 +est: cpu_vendor GenuineIntel, msr 11
 +device_attach: est0 attach returned 6
 +p4tcc0: <CPU Frequency Thermal Control> on cpu0
 +est1: <Enhanced SpeedStep Frequency Control> on cpu1
 +est: CPU supports Enhanced Speedstep, but is not recognized.
 +est: cpu_vendor GenuineIntel, msr 11
 +device_attach: est1 attach returned 6
 +p4tcc1: <CPU Frequency Thermal Control> on cpu1
 +est2: <Enhanced SpeedStep Frequency Control> on cpu2
 +est: CPU supports Enhanced Speedstep, but is not recognized.
 +est: cpu_vendor GenuineIntel, msr 11
 +device_attach: est2 attach returned 6
 +p4tcc2: <CPU Frequency Thermal Control> on cpu2
 +est3: <Enhanced SpeedStep Frequency Control> on cpu3
 +est: CPU supports Enhanced Speedstep, but is not recognized.
 +est: cpu_vendor GenuineIntel, msr 11
 +device_attach: est3 attach returned 6
 +p4tcc3: <CPU Frequency Thermal Control> on cpu3
 +Timecounters tick every 1.000 msec
 +IPsec: Initialized Security Association Processing.
 +usbus0: 12Mbps Full Speed USB v1.0
 +usbus1: 12Mbps Full Speed USB v1.0
 +usbus2: 480Mbps High Speed USB v2.0
 +usbus3: 12Mbps Full Speed USB v1.0
 +usbus4: 12Mbps Full Speed USB v1.0
 +usbus5: 12Mbps Full Speed USB v1.0
 +usbus6: 480Mbps High Speed USB v2.0
 +ugen0.1: <Intel> at usbus0
 +uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
 +ugen1.1: <Intel> at usbus1
 +uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
 +ugen2.1: <Intel> at usbus2
 +uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
 +ugen3.1: <Intel> at usbus3
 +uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
 +ugen4.1: <Intel> at usbus4
 +uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
 +ugen5.1: <Intel> at usbus5
 +uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
 +ugen6.1: <Intel> at usbus6
 +uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
 +uhub0: 2 ports with 2 removable, self powered
 +uhub1: 2 ports with 2 removable, self powered
 +uhub3: 2 ports with 2 removable, self powered
 +uhub4: 2 ports with 2 removable, self powered
 +uhub5: 2 ports with 2 removable, self powered
 +mpt0: mpt_read_cfg_page: Config Info Status 22
 +mpt0:vol0(mpt0:0:0): mpt_refresh_raid_vol: Failed to read RAID Vol Page(0)
 +mpt0:vol0(mpt0:0:0): Settings ( )
 +mpt0:vol0(mpt0:0:0): 0 Members:
 +mpt0:vol0(mpt0:0:0): RAID-0 - Optimal
 +(mpt0:0:4): Physical (mpt0:0:4:0), Pass-thru (mpt0:1:0:0)
 +(mpt0:0:4): Online
 +(mpt0:0:5): Physical (mpt0:0:5:0), Pass-thru (mpt0:1:1:0)
 +(mpt0:0:5): Online
 +pass1 at ata2 bus 0 scbus2 target 0 lun 0
 +da0 at mpt0 bus 0 scbus0 target 3 lun 0
 +da0: <LSILOGIC Logical Volume 3000> Fixed Direct Access SCSI-2 device 
 +da0: 300.000MB/s transfers
 +da0: Command Queueing enabled
 +da0: 33378MB (68358144 512 byte sectors: 255H 63S/T 4255C)
 +pass1: <TSSTcorp DVD-ROM TS-L333H ID03> Removable CD-ROM SCSI-0 device 
 +pass1: 150.000MB/s transfers (SATA 1.x, UDMA2, ATAPI 12bytes, PIO 8192bytes)
 +SMP: AP CPU #1 Launched!
 +SMP: AP CPU #2 Launched!
 +SMP: AP CPU #3 Launched!
 +Timecounter "TSC" frequency 2133449161 Hz quality 1000
 +Trying to mount root from ufs:/dev/ufs/BSDRPs1a [ro]...
 +ugen3.2: <IBM> at usbus3
 +ichsmb0: <Intel 82801JI (ICH10) SMBus controller> port 0x2000-0x201f mem 0x97d22000-0x97d220ff irq 22 at device 31.3 on pci0
 +smbus0: <System Management Bus> on ichsmb0
 +coretemp0: <CPU On-Die Thermal Sensors> on cpu0
 +est0: <Enhanced SpeedStep Frequency Control> on cpu0
 +est: CPU supports Enhanced Speedstep, but is not recognized.
 +est: cpu_vendor GenuineIntel, msr 11
 +device_attach: est0 attach returned 6
 +coretemp1: <CPU On-Die Thermal Sensors> on cpu1
 +est1: <Enhanced SpeedStep Frequency Control> on cpu1
 +est: CPU supports Enhanced Speedstep, but is not recognized.
 +est: cpu_vendor GenuineIntel, msr 11
 +device_attach: est1 attach returned 6
 +coretemp2: <CPU On-Die Thermal Sensors> on cpu2
 +est2: <Enhanced SpeedStep Frequency Control> on cpu2
 +est: CPU supports Enhanced Speedstep, but is not recognized.
 +est: cpu_vendor GenuineIntel, msr 11
 +device_attach: est2 attach returned 6
 +coretemp3: <CPU On-Die Thermal Sensors> on cpu3
 +est3: <Enhanced SpeedStep Frequency Control> on cpu3
 +est: CPU supports Enhanced Speedstep, but is not recognized.
 +est: cpu_vendor GenuineIntel, msr 11
 +device_attach: est3 attach returned 6
 +aesni0: <AES-CBC,AES-XTS> on motherboard
 +</code>
 +
 +==== pciconf ====
 +
 +<code>
 +hostb0@pci0:0:0:0:      class=0x060000 card=0x72701014 chip=0x34068086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520 I/O Hub to ESI Port'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +    cap 05[60] = MSI supports 2 messages, vector masks 
 +    cap 10[90] = PCI-Express 2 root port max data 128(128) link x4(x4)
 +                 speed 2.5(2.5) ASPM disabled(L0s/L1)
 +    cap 01[e0] = powerspec 3  supports D0 D3  current D0
 +ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
 +ecap 000d[150] = ACS 1
 +ecap 000b[160] = Vendor 0
 +pcib1@pci0:0:1:0:       class=0x060400 card=0x34081014 chip=0x34088086 rev=0x22 hdr=0x01
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 I/O Hub PCI Express Root Port 1'
 +    class      = bridge
 +    subclass   = PCI-PCI
 +    cap 0d[40] = PCI Bridge card=0x34081014
 +    cap 05[60] = MSI supports 2 messages, vector masks 
 +    cap 10[90] = PCI-Express 2 root port max data 256(256) link x2(x2)
 +                 speed 5.0(5.0)
 +    cap 01[e0] = powerspec 3  supports D0 D3  current D0
 +ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
 +ecap 000d[150] = ACS 1
 +ecap 000b[160] = Vendor 0
 +pcib2@pci0:0:2:0:       class=0x060400 card=0x34091014 chip=0x34098086 rev=0x22 hdr=0x01
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 I/O Hub PCI Express Root Port 2'
 +    class      = bridge
 +    subclass   = PCI-PCI
 +    cap 0d[40] = PCI Bridge card=0x34091014
 +    cap 05[60] = MSI supports 2 messages, vector masks 
 +    cap 10[90] = PCI-Express 2 root port max data 256(256) link x0(x2)
 +                 speed 0.0(5.0)
 +    cap 01[e0] = powerspec 3  supports D0 D3  current D0
 +ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
 +ecap 000d[150] = ACS 1
 +pcib3@pci0:0:3:0:       class=0x060400 card=0x340a1014 chip=0x340a8086 rev=0x22 hdr=0x01
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 I/O Hub PCI Express Root Port 3'
 +    class      = bridge
 +    subclass   = PCI-PCI
 +    cap 0d[40] = PCI Bridge card=0x340a1014
 +    cap 05[60] = MSI supports 2 messages, vector masks 
 +    cap 10[90] = PCI-Express 2 root port slot max data 256(256) link x8(x16)
 +                 speed 5.0(5.0)
 +    cap 01[e0] = powerspec 3  supports D0 D3  current D0
 +ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
 +ecap 000d[150] = ACS 1
 +ecap 000b[160] = Vendor 0
 +pcib4@pci0:0:7:0:       class=0x060400 card=0x340e1014 chip=0x340e8086 rev=0x22 hdr=0x01
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 I/O Hub PCI Express Root Port 7'
 +    class      = bridge
 +    subclass   = PCI-PCI
 +    cap 0d[40] = PCI Bridge card=0x340e1014
 +    cap 05[60] = MSI supports 2 messages, vector masks 
 +    cap 10[90] = PCI-Express 2 root port slot max data 256(256) link x4(x16)
 +                 speed 5.0(5.0)
 +    cap 01[e0] = powerspec 3  supports D0 D3  current D0
 +ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
 +ecap 000d[150] = ACS 1
 +ecap 000b[160] = Vendor 0
 +none0@pci0:0:16:0:      class=0x080000 card=0x00000000 chip=0x34258086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 Physical and Link Layer Registers Port 0'
 +    class      = base peripheral
 +    subclass   = interrupt controller
 +    cap 09[50] = vendor (length 255) Intel cap 15 version 0
 +none1@pci0:0:16:1:      class=0x080000 card=0x00000000 chip=0x34268086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 Routing and Protocol Layer Registers Port 0'
 +    class      = base peripheral
 +    subclass   = interrupt controller
 +none2@pci0:0:17:0:      class=0x080000 card=0x00000000 chip=0x34278086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500 Physical and Link Layer Registers Port 1'
 +    class      = base peripheral
 +    subclass   = interrupt controller
 +    cap 09[50] = vendor (length 255) Intel cap 15 version 0
 +none3@pci0:0:17:1:      class=0x080000 card=0x00000000 chip=0x34288086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500 Routing & Protocol Layer Register Port 1'
 +    class      = base peripheral
 +    subclass   = interrupt controller
 +none4@pci0:0:20:0:      class=0x080000 card=0x00000000 chip=0x342e8086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 I/O Hub System Management Registers'
 +    class      = base peripheral
 +    subclass   = interrupt controller
 +    cap 10[40] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
 +                 ASPM disabled(L0s)
 +none5@pci0:0:20:1:      class=0x080000 card=0x00000000 chip=0x34228086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers'
 +    class      = base peripheral
 +    subclass   = interrupt controller
 +    cap 10[40] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
 +                 ASPM disabled(L0s)
 +none6@pci0:0:20:2:      class=0x080000 card=0x00000000 chip=0x34238086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 I/O Hub Control Status and RAS Registers'
 +    class      = base peripheral
 +    subclass   = interrupt controller
 +    cap 10[40] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
 +                 ASPM disabled(L0s)
 +none7@pci0:0:20:3:      class=0x080000 card=0x00000000 chip=0x34388086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 I/O Hub Throttle Registers'
 +    class      = base peripheral
 +    subclass   = interrupt controller
 +ioapic0@pci0:0:21:0:    class=0x080020 card=0x00000000 chip=0x342f8086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 Trusted Execution Technology Registers'
 +    class      = base peripheral
 +    subclass   = interrupt controller
 +none8@pci0:0:22:0:      class=0x088000 card=0x34301014 chip=0x34308086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 Chipset QuickData Technology Device'
 +    class      = base peripheral
 +    bar   [10] = type Memory, range 64, base 0x97d00000, size 16384, enabled
 +    cap 11[80] = MSI-X supports 1 message in map 0x10
 +    cap 10[90] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
 +    cap 01[e0] = powerspec 3  supports D0 D3  current D3
 +none9@pci0:0:22:1:      class=0x088000 card=0x34311014 chip=0x34318086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 Chipset QuickData Technology Device'
 +    class      = base peripheral
 +    bar   [10] = type Memory, range 64, base 0x97d04000, size 16384, enabled
 +    cap 11[80] = MSI-X supports 1 message in map 0x10
 +    cap 10[90] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
 +    cap 01[e0] = powerspec 3  supports D0 D3  current D3
 +none10@pci0:0:22:2:     class=0x088000 card=0x34321014 chip=0x34328086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 Chipset QuickData Technology Device'
 +    class      = base peripheral
 +    bar   [10] = type Memory, range 64, base 0x97d08000, size 16384, enabled
 +    cap 11[80] = MSI-X supports 1 message in map 0x10
 +    cap 10[90] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
 +    cap 01[e0] = powerspec 3  supports D0 D3  current D3
 +none11@pci0:0:22:3:     class=0x088000 card=0x34331014 chip=0x34338086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 Chipset QuickData Technology Device'
 +    class      = base peripheral
 +    bar   [10] = type Memory, range 64, base 0x97d0c000, size 16384, enabled
 +    cap 11[80] = MSI-X supports 1 message in map 0x10
 +    cap 10[90] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
 +    cap 01[e0] = powerspec 3  supports D0 D3  current D3
 +none12@pci0:0:22:4:     class=0x088000 card=0x34291014 chip=0x34298086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 Chipset QuickData Technology Device'
 +    class      = base peripheral
 +    bar   [10] = type Memory, range 64, base 0x97d10000, size 16384, enabled
 +    cap 11[80] = MSI-X supports 1 message in map 0x10
 +    cap 10[90] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
 +    cap 01[e0] = powerspec 3  supports D0 D3  current D3
 +none13@pci0:0:22:5:     class=0x088000 card=0x342a1014 chip=0x342a8086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 Chipset QuickData Technology Device'
 +    class      = base peripheral
 +    bar   [10] = type Memory, range 64, base 0x97d14000, size 16384, enabled
 +    cap 11[80] = MSI-X supports 1 message in map 0x10
 +    cap 10[90] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
 +    cap 01[e0] = powerspec 3  supports D0 D3  current D3
 +none14@pci0:0:22:6:     class=0x088000 card=0x342b1014 chip=0x342b8086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 Chipset QuickData Technology Device'
 +    class      = base peripheral
 +    bar   [10] = type Memory, range 64, base 0x97d18000, size 16384, enabled
 +    cap 11[80] = MSI-X supports 1 message in map 0x10
 +    cap 10[90] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
 +    cap 01[e0] = powerspec 3  supports D0 D3  current D3
 +none15@pci0:0:22:7:     class=0x088000 card=0x342c1014 chip=0x342c8086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 Chipset QuickData Technology Device'
 +    class      = base peripheral
 +    bar   [10] = type Memory, range 64, base 0x97d1c000, size 16384, enabled
 +    cap 11[80] = MSI-X supports 1 message in map 0x10
 +    cap 10[90] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
 +    cap 01[e0] = powerspec 3  supports D0 D3  current D3
 +uhci0@pci0:0:26:0:      class=0x0c0300 card=0x3a371014 chip=0x3a378086 rev=0x00 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82801JI (ICH10 Family) USB UHCI Controller'
 +    class      = serial bus
 +    subclass   = USB
 +    bar   [20] = type I/O Port, range 32, base 0x20a0, size 32, enabled
 +    cap 13[50] = PCI Advanced Features: FLR TP
 +uhci1@pci0:0:26:1:      class=0x0c0300 card=0x3a381014 chip=0x3a388086 rev=0x00 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82801JI (ICH10 Family) USB UHCI Controller'
 +    class      = serial bus
 +    subclass   = USB
 +    bar   [20] = type I/O Port, range 32, base 0x2080, size 32, enabled
 +    cap 13[50] = PCI Advanced Features: FLR TP
 +ehci0@pci0:0:26:7:      class=0x0c0320 card=0x3a3c1014 chip=0x3a3c8086 rev=0x00 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82801JI (ICH10 Family) USB2 EHCI Controller'
 +    class      = serial bus
 +    subclass   = USB
 +    bar   [10] = type Memory, range 32, base 0x97d21000, size 1024, enabled
 +    cap 01[50] = powerspec 2  supports D0 D3  current D0
 +    cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
 +    cap 13[98] = PCI Advanced Features: FLR TP
 +pcib5@pci0:0:28:0:      class=0x060400 card=0x3a401014 chip=0x3a408086 rev=0x00 hdr=0x01
 +    vendor     = 'Intel Corporation'
 +    device     = '82801JI (ICH10 Family) PCI Express Root Port 1'
 +    class      = bridge
 +    subclass   = PCI-PCI
 +    cap 10[40] = PCI-Express 1 root port slot max data 128(128) link x4(x4)
 +                 speed 2.5(2.5)
 +    cap 05[80] = MSI supports 1 message 
 +    cap 0d[90] = PCI Bridge card=0x3a401014
 +    cap 01[a0] = powerspec 2  supports D0 D3  current D0
 +ecap 0002[100] = VC 1 max VC0
 +ecap 0005[180] = Root Complex Link Declaration 1
 +pcib6@pci0:0:28:4:      class=0x060400 card=0x3a481014 chip=0x3a488086 rev=0x00 hdr=0x01
 +    vendor     = 'Intel Corporation'
 +    device     = '82801JI (ICH10 Family) PCI Express Root Port 5'
 +    class      = bridge
 +    subclass   = PCI-PCI
 +    cap 10[40] = PCI-Express 1 root port max data 128(128) link x1(x1)
 +                 speed 2.5(2.5)
 +    cap 05[80] = MSI supports 1 message 
 +    cap 0d[90] = PCI Bridge card=0x3a481014
 +    cap 01[a0] = powerspec 2  supports D0 D3  current D0
 +ecap 0002[100] = VC 1 max VC0
 +ecap 0005[180] = Root Complex Link Declaration 1
 +uhci2@pci0:0:29:0:      class=0x0c0300 card=0x3a341014 chip=0x3a348086 rev=0x00 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82801JI (ICH10 Family) USB UHCI Controller'
 +    class      = serial bus
 +    subclass   = USB
 +    bar   [20] = type I/O Port, range 32, base 0x2060, size 32, enabled
 +    cap 13[50] = PCI Advanced Features: FLR TP
 +uhci3@pci0:0:29:1:      class=0x0c0300 card=0x3a351014 chip=0x3a358086 rev=0x00 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82801JI (ICH10 Family) USB UHCI Controller'
 +    class      = serial bus
 +    subclass   = USB
 +    bar   [20] = type I/O Port, range 32, base 0x2040, size 32, enabled
 +    cap 13[50] = PCI Advanced Features: FLR TP
 +uhci4@pci0:0:29:2:      class=0x0c0300 card=0x3a361014 chip=0x3a368086 rev=0x00 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82801JI (ICH10 Family) USB UHCI Controller'
 +    class      = serial bus
 +    subclass   = USB
 +    bar   [20] = type I/O Port, range 32, base 0x2020, size 32, enabled
 +    cap 13[50] = PCI Advanced Features: FLR TP
 +ehci1@pci0:0:29:7:      class=0x0c0320 card=0x3a3a1014 chip=0x3a3a8086 rev=0x00 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82801JI (ICH10 Family) USB2 EHCI Controller'
 +    class      = serial bus
 +    subclass   = USB
 +    bar   [10] = type Memory, range 32, base 0x97d20000, size 1024, enabled
 +    cap 01[50] = powerspec 2  supports D0 D3  current D0
 +    cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
 +    cap 13[98] = PCI Advanced Features: FLR TP
 +pcib8@pci0:0:30:0:      class=0x060401 card=0x244e1014 chip=0x244e8086 rev=0x90 hdr=0x01
 +    vendor     = 'Intel Corporation'
 +    device     = '82801 PCI Bridge'
 +    class      = bridge
 +    subclass   = PCI-PCI
 +    cap 0d[50] = PCI Bridge card=0x244e1014
 +isab0@pci0:0:31:0:      class=0x060100 card=0x3a181014 chip=0x3a188086 rev=0x00 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82801JIB (ICH10) LPC Interface Controller'
 +    class      = bridge
 +    subclass   = PCI-ISA
 +    cap 09[e0] = vendor (length 12) Intel cap 1 version 0
 +                 features: Quick Resume, SATA RAID-5, 4 PCI-e x1 slots, SATA RAID-0/1/10
 +atapci0@pci0:0:31:2:    class=0x01018f card=0x3a201014 chip=0x3a208086 rev=0x00 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82801JI (ICH10 Family) 4 port SATA IDE Controller'
 +    class      = mass storage
 +    subclass   = ATA
 +    bar   [10] = type I/O Port, range 32, base 0x2118, size  8, enabled
 +    bar   [14] = type I/O Port, range 32, base 0x212c, size  4, enabled
 +    bar   [18] = type I/O Port, range 32, base 0x2110, size  8, enabled
 +    bar   [1c] = type I/O Port, range 32, base 0x2128, size  4, enabled
 +    bar   [20] = type I/O Port, range 32, base 0x20f0, size 16, enabled
 +    bar   [24] = type I/O Port, range 32, base 0x20e0, size 16, enabled
 +    cap 01[70] = powerspec 3  supports D0 D3  current D0
 +    cap 13[b0] = PCI Advanced Features: FLR TP
 +ichsmb0@pci0:0:31:3:    class=0x0c0500 card=0x3a301014 chip=0x3a308086 rev=0x00 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82801JI (ICH10 Family) SMBus Controller'
 +    class      = serial bus
 +    subclass   = SMBus
 +    bar   [10] = type Memory, range 64, base 0x97d22000, size 256, enabled
 +    bar   [20] = type I/O Port, range 32, base 0x2000, size 32, enabled
 +atapci1@pci0:0:31:5:    class=0x010185 card=0x3a261014 chip=0x3a268086 rev=0x00 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82801JI (ICH10 Family) 2 port SATA IDE Controller'
 +    class      = mass storage
 +    subclass   = ATA
 +    bar   [10] = type I/O Port, range 32, base 0x2108, size  8, enabled
 +    bar   [14] = type I/O Port, range 32, base 0x2124, size  4, enabled
 +    bar   [18] = type I/O Port, range 32, base 0x2100, size  8, enabled
 +    bar   [1c] = type I/O Port, range 32, base 0x2120, size  4, enabled
 +    bar   [20] = type I/O Port, range 32, base 0x20d0, size 16, enabled
 +    bar   [24] = type I/O Port, range 32, base 0x20c0, size 16, enabled
 +    cap 01[70] = powerspec 3  supports D0 D3  current D0
 +    cap 13[b0] = PCI Advanced Features: FLR TP
 +bce0@pci0:11:0:0:       class=0x020000 card=0x03a91014 chip=0x163914e4 rev=0x20 hdr=0x00
 +    vendor     = 'Broadcom Corporation'
 +    device     = 'NetXtreme II BCM5709 Gigabit Ethernet'
 +    class      = network
 +    subclass   = ethernet
 +    bar   [10] = type Memory, range 64, base 0x92000000, size 33554432, enabled
 +    cap 01[48] = powerspec 3  supports D0 D3  current D0
 +    cap 03[50] = VPD
 +    cap 05[58] = MSI supports 16 messages, 64 bit enabled with 1 message
 +    cap 11[a0] = MSI-X supports 9 messages in map 0x10
 +    cap 10[ac] = PCI-Express 2 endpoint max data 256(512) link x2(x4)
 +                 speed 5.0(5.0) ASPM disabled(L0s/L1)
 +ecap 0003[100] = Serial 1 5cf3fcfffee5a2f8
 +ecap 0001[110] = AER 1 0 fatal 0 non-fatal 1 corrected
 +ecap 0004[150] = Power Budgeting 1
 +ecap 0002[160] = VC 1 max VC0
 +bce1@pci0:11:0:1:       class=0x020000 card=0x03a91014 chip=0x163914e4 rev=0x20 hdr=0x00
 +    vendor     = 'Broadcom Corporation'
 +    device     = 'NetXtreme II BCM5709 Gigabit Ethernet'
 +    class      = network
 +    subclass   = ethernet
 +    bar   [10] = type Memory, range 64, base 0x94000000, size 33554432, enabled
 +    cap 01[48] = powerspec 3  supports D0 D3  current D0
 +    cap 03[50] = VPD
 +    cap 05[58] = MSI supports 16 messages, 64 bit enabled with 1 message
 +    cap 11[a0] = MSI-X supports 9 messages in map 0x10
 +    cap 10[ac] = PCI-Express 2 endpoint max data 256(512) link x2(x4)
 +                 speed 5.0(5.0) ASPM disabled(L0s/L1)
 +ecap 0003[100] = Serial 1 5cf3fcfffee5a2fa
 +ecap 0001[110] = AER 1 0 fatal 0 non-fatal 1 corrected
 +ecap 0004[150] = Power Budgeting 1
 +ecap 0002[160] = VC 1 max VC0
 +ix0@pci0:21:0:0:        class=0x020000 card=0x00018086 chip=0x15288086 rev=0x01 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Ethernet Controller 10 Gigabit X540-AT2'
 +    class      = network
 +    subclass   = ethernet
 +    bar   [10] = type Prefetchable Memory, range 64, base 0xfbc00000, size 2097152, enabled
 +    bar   [20] = type Prefetchable Memory, range 64, base 0xfbe04000, size 16384, enabled
 +    cap 01[40] = powerspec 3  supports D0 D3  current D0
 +    cap 05[50] = MSI supports 1 message, 64 bit, vector masks 
 +    cap 11[70] = MSI-X supports 64 messages in map 0x20 enabled
 +    cap 10[a0] = PCI-Express 2 endpoint max data 256(512) FLR link x8(x8)
 +                 speed 5.0(5.0) ASPM disabled(L0s/L1)
 +ecap 0001[100] = AER 2 0 fatal 0 non-fatal 1 corrected
 +ecap 0003[140] = Serial 1 a0369fffff1e1ed8
 +ecap 000e[150] = ARI 1
 +ecap 0010[160] = SRIOV 1
 +ecap 000d[1d0] = ACS 1
 +ix1@pci0:21:0:1:        class=0x020000 card=0x00018086 chip=0x15288086 rev=0x01 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Ethernet Controller 10 Gigabit X540-AT2'
 +    class      = network
 +    subclass   = ethernet
 +    bar   [10] = type Prefetchable Memory, range 64, base 0xfba00000, size 2097152, enabled
 +    bar   [20] = type Prefetchable Memory, range 64, base 0xfbe00000, size 16384, enabled
 +    cap 01[40] = powerspec 3  supports D0 D3  current D0
 +    cap 05[50] = MSI supports 1 message, 64 bit, vector masks 
 +    cap 11[70] = MSI-X supports 64 messages in map 0x20 enabled
 +    cap 10[a0] = PCI-Express 2 endpoint max data 256(512) FLR link x8(x8)
 +                 speed 5.0(5.0) ASPM disabled(L0s/L1)
 +ecap 0001[100] = AER 2 0 fatal 0 non-fatal 1 corrected
 +ecap 0003[140] = Serial 1 a0369fffff1e1ed8
 +ecap 000e[150] = ARI 1
 +ecap 0010[160] = SRIOV 1
 +ecap 000d[1d0] = ACS 1
 +igb0@pci0:26:0:0:       class=0x020000 card=0x12a28086 chip=0x150e8086 rev=0x01 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82580 Gigabit Network Connection'
 +    class      = network
 +    subclass   = ethernet
 +    bar   [10] = type Memory, range 32, base 0x97b80000, size 524288, enabled
 +    bar   [1c] = type Memory, range 32, base 0x97c0c000, size 16384, enabled
 +    cap 01[40] = powerspec 3  supports D0 D3  current D0
 +    cap 05[50] = MSI supports 1 message, 64 bit, vector masks 
 +    cap 11[70] = MSI-X supports 10 messages in map 0x1c enabled
 +    cap 10[a0] = PCI-Express 2 endpoint max data 256(512) FLR link x4(x4)
 +                 speed 5.0(5.0) ASPM disabled(L0s/L1)
 +ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
 +ecap 0003[140] = Serial 1 001b21ffffd43f28
 +ecap 0017[1a0] = TPH Requester 1
 +ecap 0018[1c0] = LTR 1
 +igb1@pci0:26:0:1:       class=0x020000 card=0x12a28086 chip=0x150e8086 rev=0x01 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82580 Gigabit Network Connection'
 +    class      = network
 +    subclass   = ethernet
 +    bar   [10] = type Memory, range 32, base 0x97b00000, size 524288, enabled
 +    bar   [1c] = type Memory, range 32, base 0x97c08000, size 16384, enabled
 +    cap 01[40] = powerspec 3  supports D0 D3  current D0
 +    cap 05[50] = MSI supports 1 message, 64 bit, vector masks 
 +    cap 11[70] = MSI-X supports 10 messages in map 0x1c enabled
 +    cap 10[a0] = PCI-Express 2 endpoint max data 256(512) FLR link x4(x4)
 +                 speed 5.0(5.0) ASPM disabled(L0s/L1)
 +ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
 +ecap 0003[140] = Serial 1 001b21ffffd43f28
 +ecap 0017[1a0] = TPH Requester 1
 +igb2@pci0:26:0:2:       class=0x020000 card=0x12a28086 chip=0x150e8086 rev=0x01 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82580 Gigabit Network Connection'
 +    class      = network
 +    subclass   = ethernet
 +    bar   [10] = type Memory, range 32, base 0x97a80000, size 524288, enabled
 +    bar   [1c] = type Memory, range 32, base 0x97c04000, size 16384, enabled
 +    cap 01[40] = powerspec 3  supports D0 D3  current D0
 +    cap 05[50] = MSI supports 1 message, 64 bit, vector masks 
 +    cap 11[70] = MSI-X supports 10 messages in map 0x1c enabled
 +    cap 10[a0] = PCI-Express 2 endpoint max data 256(512) FLR link x4(x4)
 +                 speed 5.0(5.0) ASPM disabled(L0s/L1)
 +ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
 +ecap 0003[140] = Serial 1 001b21ffffd43f28
 +ecap 0017[1a0] = TPH Requester 1
 +igb3@pci0:26:0:3:       class=0x020000 card=0x12a28086 chip=0x150e8086 rev=0x01 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82580 Gigabit Network Connection'
 +    class      = network
 +    subclass   = ethernet
 +    bar   [10] = type Memory, range 32, base 0x97a00000, size 524288, enabled
 +    bar   [1c] = type Memory, range 32, base 0x97c00000, size 16384, enabled
 +    cap 01[40] = powerspec 3  supports D0 D3  current D0
 +    cap 05[50] = MSI supports 1 message, 64 bit, vector masks 
 +    cap 11[70] = MSI-X supports 10 messages in map 0x1c enabled
 +    cap 10[a0] = PCI-Express 2 endpoint max data 256(512) FLR link x4(x4)
 +                 speed 5.0(5.0) ASPM disabled(L0s/L1)
 +ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
 +ecap 0003[140] = Serial 1 001b21ffffd43f28
 +ecap 0017[1a0] = TPH Requester 1
 +mpt0@pci0:1:0:0:        class=0x010000 card=0x03941014 chip=0x00581000 rev=0x10 hdr=0x00
 +    vendor     = 'LSI Logic / Symbios Logic'
 +    device     = 'SAS1068E PCI-Express Fusion-MPT SAS'
 +    class      = mass storage
 +    subclass   = SCSI
 +    bar   [10] = type I/O Port, range 32, base 0x1000, size 256, disabled
 +    bar   [14] = type Memory, range 64, base 0x97910000, size 16384, enabled
 +    bar   [1c] = type Memory, range 64, base 0x97900000, size 65536, enabled
 +    cap 01[50] = powerspec 2  supports D0 D1 D2 D3  current D0
 +    cap 10[68] = PCI-Express 1 endpoint max data 128(4096) link x4(x8)
 +                 speed 2.5(2.5) ASPM disabled(L0s/L1)
 +    cap 05[98] = MSI supports 1 message, 64 bit 
 +    cap 11[b0] = MSI-X supports 1 message in map 0x14 enabled
 +ecap 0001[100] = AER 1 0 fatal 1 non-fatal 0 corrected
 +pcib7@pci0:6:0:0:       class=0x060400 card=0x03691014 chip=0x0452101b rev=0x01 hdr=0x01
 +    vendor     = 'Vitesse Semiconductor'
 +    device     = 'VSC452 [SuperBMC]'
 +    class      = bridge
 +    subclass   = PCI-PCI
 +    cap 05[50] = MSI supports 2 messages, 64 bit 
 +    cap 01[78] = powerspec 3  supports D0 D3  current D0
 +    cap 10[80] = PCI-Express 1 PCI bridge max data 128(128) link x1(x1)
 +                 speed 2.5(2.5) ASPM disabled(L0s)
 +    cap 0d[a4] = PCI Bridge card=0x03691014
 +ecap 0002[100] = VC 1 max VC0
 +vgapci0@pci0:7:0:0:     class=0x030000 card=0x03691014 chip=0x0530102b rev=0x00 hdr=0x00
 +    vendor     = 'Matrox Graphics, Inc.'
 +    device     = 'MGA G200EV'
 +    class      = display
 +    subclass   = VGA
 +    bar   [10] = type Prefetchable Memory, range 32, base 0x96000000, size 16777216, enabled
 +    bar   [14] = type Memory, range 32, base 0x97800000, size 16384, enabled
 +    bar   [18] = type Memory, range 32, base 0x97000000, size 8388608, enabled
 +    cap 01[dc] = powerspec 1  supports D0 D3  current D0
 +hostb1@pci0:255:0:0:    class=0x060000 card=0x80868086 chip=0x2c708086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series QuickPath Architecture Generic Non-core Registers'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb2@pci0:255:0:1:    class=0x060000 card=0x80868086 chip=0x2d818086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series QuickPath Architecture System Address Decoder'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb3@pci0:255:2:0:    class=0x060000 card=0x80868086 chip=0x2d908086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series QPI Link 0'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb4@pci0:255:2:1:    class=0x060000 card=0x80868086 chip=0x2d918086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series QPI Physical 0'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb5@pci0:255:2:2:    class=0x060000 card=0x80868086 chip=0x2d928086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Mirror Port Link 0'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb6@pci0:255:2:3:    class=0x060000 card=0x80868086 chip=0x2d938086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Mirror Port Link 1'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb7@pci0:255:2:4:    class=0x060000 card=0x80868086 chip=0x2d948086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series QPI Link 1'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb8@pci0:255:2:5:    class=0x060000 card=0x80868086 chip=0x2d958086 rev=0x02 hdr=0x00                               [48/1639]
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series QPI Physical 1'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb9@pci0:255:3:0:    class=0x060000 card=0x80868086 chip=0x2d988086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Registers'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb10@pci0:255:3:1:   class=0x060000 card=0x80868086 chip=0x2d998086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Target Address Decoder'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb11@pci0:255:3:2:   class=0x060000 card=0x80868086 chip=0x2d9a8086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller RAS Registers'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb12@pci0:255:3:4:   class=0x060000 card=0x80868086 chip=0x2d9c8086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Test Registers'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb13@pci0:255:4:0:   class=0x060000 card=0x80868086 chip=0x2da08086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Channel 0 Control'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb14@pci0:255:4:1:   class=0x060000 card=0x80868086 chip=0x2da18086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Channel 0 Address'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb15@pci0:255:4:2:   class=0x060000 card=0x80868086 chip=0x2da28086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Channel 0 Rank'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb16@pci0:255:4:3:   class=0x060000 card=0x80868086 chip=0x2da38086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Channel 0 Thermal Control'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb17@pci0:255:5:0:   class=0x060000 card=0x80868086 chip=0x2da88086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Channel 1 Control'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb18@pci0:255:5:1:   class=0x060000 card=0x80868086 chip=0x2da98086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Channel 1 Address'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb19@pci0:255:5:2:   class=0x060000 card=0x80868086 chip=0x2daa8086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Channel 1 Rank'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb20@pci0:255:5:3:   class=0x060000 card=0x80868086 chip=0x2dab8086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Channel 1 Thermal Control'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb21@pci0:255:6:0:   class=0x060000 card=0x80868086 chip=0x2db08086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Channel 2 Control'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb22@pci0:255:6:1:   class=0x060000 card=0x80868086 chip=0x2db18086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Channel 2 Address'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb23@pci0:255:6:2:   class=0x060000 card=0x80868086 chip=0x2db28086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Channel 2 Rank'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb24@pci0:255:6:3:   class=0x060000 card=0x80868086 chip=0x2db38086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Channel 2 Thermal Control'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +
 +
 +
 +
 +
 +[root@bsdrp1]~# pciconf -lvcb
 +hostb0@pci0:0:0:0:      class=0x060000 card=0x72701014 chip=0x34068086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520 I/O Hub to ESI Port'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +    cap 05[60] = MSI supports 2 messages, vector masks
 +    cap 10[90] = PCI-Express 2 root port max data 128(128) link x4(x4)
 +                 speed 2.5(2.5)
 +    cap 01[e0] = powerspec 3  supports D0 D3  current D0
 +ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
 +ecap 000d[150] = ACS 1
 +ecap 000b[160] = Vendor 0
 +pcib1@pci0:0:1:0:       class=0x060400 card=0x34081014 chip=0x34088086 rev=0x22 hdr=0x01
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 I/O Hub PCI Express Root Port 1'
 +    class      = bridge
 +    subclass   = PCI-PCI
 +    cap 0d[40] = PCI Bridge card=0x34081014
 +    cap 05[60] = MSI supports 2 messages, vector masks
 +    cap 10[90] = PCI-Express 2 root port max data 256(256) link x2(x2)
 +                 speed 5.0(5.0)
 +    cap 01[e0] = powerspec 3  supports D0 D3  current D0
 +ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
 +ecap 000d[150] = ACS 1
 +ecap 000b[160] = Vendor 0
 +pcib2@pci0:0:2:0:       class=0x060400 card=0x34091014 chip=0x34098086 rev=0x22 hdr=0x01
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 I/O Hub PCI Express Root Port 2'
 +    class      = bridge
 +    subclass   = PCI-PCI
 +    cap 0d[40] = PCI Bridge card=0x34091014
 +    cap 05[60] = MSI supports 2 messages, vector masks
 +    cap 10[90] = PCI-Express 2 root port max data 256(256) link x0(x2)
 +                 speed 0.0(5.0)
 +    cap 01[e0] = powerspec 3  supports D0 D3  current D0
 +ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
 +ecap 000d[150] = ACS 1
 +pcib3@pci0:0:3:0:       class=0x060400 card=0x340a1014 chip=0x340a8086 rev=0x22 hdr=0x01
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 I/O Hub PCI Express Root Port 3'
 +    class      = bridge
 +    subclass   = PCI-PCI
 +    cap 0d[40] = PCI Bridge card=0x340a1014
 +    cap 05[60] = MSI supports 2 messages, vector masks
 +    cap 10[90] = PCI-Express 2 root port slot max data 256(256) link x0(x16)
 +                 speed 0.0(5.0)
 +    cap 01[e0] = powerspec 3  supports D0 D3  current D0
 +ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
 +ecap 000d[150] = ACS 1
 +ecap 000b[160] = Vendor 0
 +pcib4@pci0:0:7:0:       class=0x060400 card=0x340e1014 chip=0x340e8086 rev=0x22 hdr=0x01
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 I/O Hub PCI Express Root Port 7'
 +    class      = bridge
 +    subclass   = PCI-PCI
 +    cap 0d[40] = PCI Bridge card=0x340e1014
 +    cap 05[60] = MSI supports 2 messages, vector masks
 +    cap 10[90] = PCI-Express 2 root port slot max data 256(256) link x4(x16)
 +                 speed 5.0(5.0)
 +    cap 01[e0] = powerspec 3  supports D0 D3  current D0
 +ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
 +ecap 000d[150] = ACS 1
 +ecap 000b[160] = Vendor 0
 +none0@pci0:0:16:0:      class=0x080000 card=0x00000000 chip=0x34258086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 Physical and Link Layer Registers Port 0'
 +    class      = base peripheral
 +    subclass   = interrupt controller
 +    cap 09[50] = vendor (length 255) Intel cap 15 version 0
 +none1@pci0:0:16:1:      class=0x080000 card=0x00000000 chip=0x34268086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 Routing and Protocol Layer Registers Port 0'
 +    class      = base peripheral
 +    subclass   = interrupt controller
 +none2@pci0:0:17:0:      class=0x080000 card=0x00000000 chip=0x34278086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500 Physical and Link Layer Registers Port 1'
 +    class      = base peripheral
 +    subclass   = interrupt controller
 +    cap 09[50] = vendor (length 255) Intel cap 15 version 0
 +none3@pci0:0:17:1:      class=0x080000 card=0x00000000 chip=0x34288086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500 Routing & Protocol Layer Register Port 1'
 +    class      = base peripheral
 +    subclass   = interrupt controller
 +none4@pci0:0:20:0:      class=0x080000 card=0x00000000 chip=0x342e8086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 I/O Hub System Management Registers'
 +    class      = base peripheral
 +    subclass   = interrupt controller
 +    cap 10[40] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
 +none5@pci0:0:20:1:      class=0x080000 card=0x00000000 chip=0x34228086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers'
 +    class      = base peripheral
 +    subclass   = interrupt controller
 +    cap 10[40] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
 +none6@pci0:0:20:2:      class=0x080000 card=0x00000000 chip=0x34238086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 I/O Hub Control Status and RAS Registers'
 +    class      = base peripheral
 +    subclass   = interrupt controller
 +    cap 10[40] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
 +none7@pci0:0:20:3:      class=0x080000 card=0x00000000 chip=0x34388086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 I/O Hub Throttle Registers'
 +    class      = base peripheral
 +    subclass   = interrupt controller
 +ioapic0@pci0:0:21:0:    class=0x080020 card=0x00000000 chip=0x342f8086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 Trusted Execution Technology Registers'
 +    class      = base peripheral
 +    subclass   = interrupt controller
 +none8@pci0:0:22:0:      class=0x088000 card=0x34301014 chip=0x34308086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 Chipset QuickData Technology Device'
 +    class      = base peripheral
 +    bar   [10] = type Memory, range 64, base 0x97d00000, size 16384, enabled
 +    cap 11[80] = MSI-X supports 1 message in map 0x10
 +    cap 10[90] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
 +    cap 01[e0] = powerspec 3  supports D0 D3  current D3
 +none9@pci0:0:22:1:      class=0x088000 card=0x34311014 chip=0x34318086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 Chipset QuickData Technology Device'
 +    class      = base peripheral
 +    bar   [10] = type Memory, range 64, base 0x97d04000, size 16384, enabled
 +    cap 11[80] = MSI-X supports 1 message in map 0x10
 +    cap 10[90] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
 +    cap 01[e0] = powerspec 3  supports D0 D3  current D3
 +none10@pci0:0:22:2:     class=0x088000 card=0x34321014 chip=0x34328086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 Chipset QuickData Technology Device'
 +    class      = base peripheral
 +    bar   [10] = type Memory, range 64, base 0x97d08000, size 16384, enabled
 +    cap 11[80] = MSI-X supports 1 message in map 0x10
 +    cap 10[90] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
 +    cap 01[e0] = powerspec 3  supports D0 D3  current D3
 +none11@pci0:0:22:3:     class=0x088000 card=0x34331014 chip=0x34338086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 Chipset QuickData Technology Device'
 +    class      = base peripheral
 +    bar   [10] = type Memory, range 64, base 0x97d0c000, size 16384, enabled
 +    cap 11[80] = MSI-X supports 1 message in map 0x10
 +    cap 10[90] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
 +    cap 01[e0] = powerspec 3  supports D0 D3  current D3
 +none12@pci0:0:22:4:     class=0x088000 card=0x34291014 chip=0x34298086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 Chipset QuickData Technology Device'
 +    class      = base peripheral
 +    bar   [10] = type Memory, range 64, base 0x97d10000, size 16384, enabled
 +    cap 11[80] = MSI-X supports 1 message in map 0x10
 +    cap 10[90] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
 +    cap 01[e0] = powerspec 3  supports D0 D3  current D3
 +none13@pci0:0:22:5:     class=0x088000 card=0x342a1014 chip=0x342a8086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 Chipset QuickData Technology Device'
 +    class      = base peripheral
 +    bar   [10] = type Memory, range 64, base 0x97d14000, size 16384, enabled
 +    cap 11[80] = MSI-X supports 1 message in map 0x10
 +    cap 10[90] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
 +    cap 01[e0] = powerspec 3  supports D0 D3  current D3
 +none14@pci0:0:22:6:     class=0x088000 card=0x342b1014 chip=0x342b8086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 Chipset QuickData Technology Device'
 +    class      = base peripheral
 +    bar   [10] = type Memory, range 64, base 0x97d18000, size 16384, enabled
 +    cap 11[80] = MSI-X supports 1 message in map 0x10
 +    cap 10[90] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
 +    cap 01[e0] = powerspec 3  supports D0 D3  current D3
 +none15@pci0:0:22:7:     class=0x088000 card=0x342c1014 chip=0x342c8086 rev=0x22 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '5520/5500/X58 Chipset QuickData Technology Device'
 +    class      = base peripheral
 +    bar   [10] = type Memory, range 64, base 0x97d1c000, size 16384, enabled
 +    cap 11[80] = MSI-X supports 1 message in map 0x10
 +    cap 10[90] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
 +    cap 01[e0] = powerspec 3  supports D0 D3  current D3
 +uhci0@pci0:0:26:0:      class=0x0c0300 card=0x3a371014 chip=0x3a378086 rev=0x00 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82801JI (ICH10 Family) USB UHCI Controller'
 +    class      = serial bus
 +    subclass   = USB
 +    bar   [20] = type I/O Port, range 32, base 0x20a0, size 32, enabled
 +    cap 13[50] = PCI Advanced Features: FLR TP
 +uhci1@pci0:0:26:1:      class=0x0c0300 card=0x3a381014 chip=0x3a388086 rev=0x00 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82801JI (ICH10 Family) USB UHCI Controller'
 +    class      = serial bus
 +    subclass   = USB
 +    bar   [20] = type I/O Port, range 32, base 0x2080, size 32, enabled
 +    cap 13[50] = PCI Advanced Features: FLR TP
 +ehci0@pci0:0:26:7:      class=0x0c0320 card=0x3a3c1014 chip=0x3a3c8086 rev=0x00 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82801JI (ICH10 Family) USB2 EHCI Controller'
 +    class      = serial bus
 +    subclass   = USB
 +    bar   [10] = type Memory, range 32, base 0x97d21000, size 1024, enabled
 +    cap 01[50] = powerspec 2  supports D0 D3  current D0
 +    cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
 +    cap 13[98] = PCI Advanced Features: FLR TP
 +pcib5@pci0:0:28:0:      class=0x060400 card=0x3a401014 chip=0x3a408086 rev=0x00 hdr=0x01                                        [300/1837]
 +    vendor     = 'Intel Corporation'
 +    device     = '82801JI (ICH10 Family) PCI Express Root Port 1'
 +    class      = bridge
 +    subclass   = PCI-PCI
 +    cap 10[40] = PCI-Express 1 root port slot max data 128(128) link x4(x4)
 +                 speed 2.5(2.5)
 +    cap 05[80] = MSI supports 1 message
 +    cap 0d[90] = PCI Bridge card=0x3a401014
 +    cap 01[a0] = powerspec 2  supports D0 D3  current D0
 +ecap 0002[100] = VC 1 max VC0
 +ecap 0005[180] = Root Complex Link Declaration 1
 +pcib6@pci0:0:28:4:      class=0x060400 card=0x3a481014 chip=0x3a488086 rev=0x00 hdr=0x01
 +    vendor     = 'Intel Corporation'
 +    device     = '82801JI (ICH10 Family) PCI Express Root Port 5'
 +    class      = bridge
 +    subclass   = PCI-PCI
 +    cap 10[40] = PCI-Express 1 root port max data 128(128) link x1(x1)
 +                 speed 2.5(2.5)
 +    cap 05[80] = MSI supports 1 message
 +    cap 0d[90] = PCI Bridge card=0x3a481014
 +    cap 01[a0] = powerspec 2  supports D0 D3  current D0
 +ecap 0002[100] = VC 1 max VC0
 +ecap 0005[180] = Root Complex Link Declaration 1
 +uhci2@pci0:0:29:0:      class=0x0c0300 card=0x3a341014 chip=0x3a348086 rev=0x00 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82801JI (ICH10 Family) USB UHCI Controller'
 +    class      = serial bus
 +    subclass   = USB
 +    bar   [20] = type I/O Port, range 32, base 0x2060, size 32, enabled
 +    cap 13[50] = PCI Advanced Features: FLR TP
 +uhci3@pci0:0:29:1:      class=0x0c0300 card=0x3a351014 chip=0x3a358086 rev=0x00 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82801JI (ICH10 Family) USB UHCI Controller'
 +    class      = serial bus
 +    subclass   = USB
 +    bar   [20] = type I/O Port, range 32, base 0x2040, size 32, enabled
 +    cap 13[50] = PCI Advanced Features: FLR TP
 +uhci4@pci0:0:29:2:      class=0x0c0300 card=0x3a361014 chip=0x3a368086 rev=0x00 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82801JI (ICH10 Family) USB UHCI Controller'
 +    class      = serial bus
 +    subclass   = USB
 +    bar   [20] = type I/O Port, range 32, base 0x2020, size 32, enabled
 +    cap 13[50] = PCI Advanced Features: FLR TP
 +ehci1@pci0:0:29:7:      class=0x0c0320 card=0x3a3a1014 chip=0x3a3a8086 rev=0x00 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82801JI (ICH10 Family) USB2 EHCI Controller'
 +    class      = serial bus
 +    subclass   = USB
 +    bar   [10] = type Memory, range 32, base 0x97d20000, size 1024, enabled
 +    cap 01[50] = powerspec 2  supports D0 D3  current D0
 +    cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
 +    cap 13[98] = PCI Advanced Features: FLR TP
 +pcib8@pci0:0:30:0:      class=0x060401 card=0x244e1014 chip=0x244e8086 rev=0x90 hdr=0x01
 +    vendor     = 'Intel Corporation'
 +    device     = '82801 PCI Bridge'
 +    class      = bridge
 +    subclass   = PCI-PCI
 +    cap 0d[50] = PCI Bridge card=0x244e1014
 +isab0@pci0:0:31:0:      class=0x060100 card=0x3a181014 chip=0x3a188086 rev=0x00 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82801JIB (ICH10) LPC Interface Controller'
 +    class      = bridge
 +    subclass   = PCI-ISA
 +    cap 09[e0] = vendor (length 12) Intel cap 1 version 0
 +                 features: Quick Resume, SATA RAID-5, 4 PCI-e x1 slots, SATA RAID-0/1/10
 +atapci0@pci0:0:31:2:    class=0x01018f card=0x3a201014 chip=0x3a208086 rev=0x00 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82801JI (ICH10 Family) 4 port SATA IDE Controller'
 +    class      = mass storage
 +    subclass   = ATA
 +    bar   [10] = type I/O Port, range 32, base 0x2118, size  8, enabled
 +    bar   [14] = type I/O Port, range 32, base 0x212c, size  4, enabled
 +    bar   [18] = type I/O Port, range 32, base 0x2110, size  8, enabled
 +    bar   [1c] = type I/O Port, range 32, base 0x2128, size  4, enabled
 +    bar   [20] = type I/O Port, range 32, base 0x20f0, size 16, enabled
 +    bar   [24] = type I/O Port, range 32, base 0x20e0, size 16, enabled
 +    cap 01[70] = powerspec 3  supports D0 D3  current D0
 +    cap 13[b0] = PCI Advanced Features: FLR TP
 +ichsmb0@pci0:0:31:3:    class=0x0c0500 card=0x3a301014 chip=0x3a308086 rev=0x00 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82801JI (ICH10 Family) SMBus Controller'
 +    class      = serial bus
 +    subclass   = SMBus
 +    bar   [10] = type Memory, range 64, base 0x97d22000, size 256, enabled
 +    bar   [20] = type I/O Port, range 32, base 0x2000, size 32, enabled
 +atapci1@pci0:0:31:5:    class=0x010185 card=0x3a261014 chip=0x3a268086 rev=0x00 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82801JI (ICH10 Family) 2 port SATA IDE Controller'
 +    class      = mass storage
 +    subclass   = ATA
 +    bar   [10] = type I/O Port, range 32, base 0x2108, size  8, enabled
 +    bar   [14] = type I/O Port, range 32, base 0x2124, size  4, enabled
 +    bar   [18] = type I/O Port, range 32, base 0x2100, size  8, enabled
 +    bar   [1c] = type I/O Port, range 32, base 0x2120, size  4, enabled
 +    bar   [20] = type I/O Port, range 32, base 0x20d0, size 16, enabled
 +    bar   [24] = type I/O Port, range 32, base 0x20c0, size 16, enabled
 +    cap 01[70] = powerspec 3  supports D0 D3  current D0
 +    cap 13[b0] = PCI Advanced Features: FLR TP
 +bce0@pci0:11:0:0:       class=0x020000 card=0x03a91014 chip=0x163914e4 rev=0x20 hdr=0x00
 +    vendor     = 'Broadcom Corporation'
 +    device     = 'NetXtreme II BCM5709 Gigabit Ethernet'
 +    class      = network
 +    subclass   = ethernet
 +    bar   [10] = type Memory, range 64, base 0x92000000, size 33554432, enabled
 +    cap 01[48] = powerspec 3  supports D0 D3  current D0
 +    cap 03[50] = VPD
 +    cap 05[58] = MSI supports 16 messages, 64 bit enabled with 1 message
 +    cap 11[a0] = MSI-X supports 9 messages in map 0x10
 +    cap 10[ac] = PCI-Express 2 endpoint max data 256(512) link x2(x4)
 +                 speed 5.0(5.0)
 +ecap 0003[100] = Serial 1 5cf3fcfffee5a2f8
 +ecap 0001[110] = AER 1 0 fatal 0 non-fatal 1 corrected
 +ecap 0004[150] = Power Budgeting 1
 +ecap 0002[160] = VC 1 max VC0
 +bce1@pci0:11:0:1:       class=0x020000 card=0x03a91014 chip=0x163914e4 rev=0x20 hdr=0x00
 +    vendor     = 'Broadcom Corporation'
 +    device     = 'NetXtreme II BCM5709 Gigabit Ethernet'
 +    class      = network
 +    subclass   = ethernet
 +    bar   [10] = type Memory, range 64, base 0x94000000, size 33554432, enabled
 +    cap 01[48] = powerspec 3  supports D0 D3  current D0
 +    cap 03[50] = VPD
 +    cap 05[58] = MSI supports 16 messages, 64 bit enabled with 1 message
 +    cap 11[a0] = MSI-X supports 9 messages in map 0x10
 +    cap 10[ac] = PCI-Express 2 endpoint max data 256(512) link x2(x4)
 +                 speed 5.0(5.0)
 +ecap 0003[100] = Serial 1 5cf3fcfffee5a2fa
 +ecap 0001[110] = AER 1 0 fatal 0 non-fatal 1 corrected
 +ecap 0004[150] = Power Budgeting 1
 +ecap 0002[160] = VC 1 max VC0
 +igb0@pci0:26:0:0:       class=0x020000 card=0x12a28086 chip=0x150e8086 rev=0x01 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82580 Gigabit Network Connection'
 +    class      = network
 +    subclass   = ethernet
 +    bar   [10] = type Memory, range 32, base 0x97b80000, size 524288, enabled
 +    bar   [1c] = type Memory, range 32, base 0x97c0c000, size 16384, enabled
 +    cap 01[40] = powerspec 3  supports D0 D3  current D0
 +    cap 05[50] = MSI supports 1 message, 64 bit, vector masks
 +    cap 11[70] = MSI-X supports 10 messages in map 0x1c enabled
 +    cap 10[a0] = PCI-Express 2 endpoint max data 256(512) FLR link x4(x4)
 +                 speed 5.0(5.0)
 +ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
 +ecap 0003[140] = Serial 1 001b21ffffd43f28
 +ecap 0017[1a0] = TPH Requester 1
 +ecap 0018[1c0] = LTR 1
 +igb1@pci0:26:0:1:       class=0x020000 card=0x12a28086 chip=0x150e8086 rev=0x01 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82580 Gigabit Network Connection'
 +    class      = network
 +    subclass   = ethernet
 +    bar   [10] = type Memory, range 32, base 0x97b00000, size 524288, enabled
 +    bar   [1c] = type Memory, range 32, base 0x97c08000, size 16384, enabled
 +    cap 01[40] = powerspec 3  supports D0 D3  current D0
 +    cap 05[50] = MSI supports 1 message, 64 bit, vector masks
 +    cap 11[70] = MSI-X supports 10 messages in map 0x1c enabled
 +    cap 10[a0] = PCI-Express 2 endpoint max data 256(512) FLR link x4(x4)
 +                 speed 5.0(5.0)
 +ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
 +ecap 0003[140] = Serial 1 001b21ffffd43f28
 +ecap 0017[1a0] = TPH Requester 1
 +igb2@pci0:26:0:2:       class=0x020000 card=0x12a28086 chip=0x150e8086 rev=0x01 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82580 Gigabit Network Connection'
 +    class      = network
 +    subclass   = ethernet
 +    bar   [10] = type Memory, range 32, base 0x97a80000, size 524288, enabled
 +    bar   [1c] = type Memory, range 32, base 0x97c04000, size 16384, enabled
 +    cap 01[40] = powerspec 3  supports D0 D3  current D0
 +    cap 05[50] = MSI supports 1 message, 64 bit, vector masks
 +    cap 11[70] = MSI-X supports 10 messages in map 0x1c enabled
 +    cap 10[a0] = PCI-Express 2 endpoint max data 256(512) FLR link x4(x4)
 +                 speed 5.0(5.0)
 +ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
 +ecap 0003[140] = Serial 1 001b21ffffd43f28
 +ecap 0017[1a0] = TPH Requester 1
 +igb3@pci0:26:0:3:       class=0x020000 card=0x12a28086 chip=0x150e8086 rev=0x01 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = '82580 Gigabit Network Connection'
 +    class      = network
 +    subclass   = ethernet
 +    bar   [10] = type Memory, range 32, base 0x97a00000, size 524288, enabled
 +    bar   [1c] = type Memory, range 32, base 0x97c00000, size 16384, enabled
 +    cap 01[40] = powerspec 3  supports D0 D3  current D0
 +    cap 05[50] = MSI supports 1 message, 64 bit, vector masks
 +    cap 11[70] = MSI-X supports 10 messages in map 0x1c enabled
 +    cap 10[a0] = PCI-Express 2 endpoint max data 256(512) FLR link x4(x4)
 +                 speed 5.0(5.0)
 +ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
 +ecap 0003[140] = Serial 1 001b21ffffd43f28
 +ecap 0017[1a0] = TPH Requester 1
 +mpt0@pci0:1:0:0:        class=0x010000 card=0x03941014 chip=0x00581000 rev=0x10 hdr=0x00
 +    vendor     = 'LSI Logic / Symbios Logic'
 +    device     = 'SAS1068E PCI-Express Fusion-MPT SAS'
 +    class      = mass storage
 +    subclass   = SCSI
 +    bar   [10] = type I/O Port, range 32, base 0x1000, size 256, disabled
 +    bar   [14] = type Memory, range 64, base 0x97910000, size 16384, enabled
 +    bar   [1c] = type Memory, range 64, base 0x97900000, size 65536, enabled
 +    cap 01[50] = powerspec 2  supports D0 D1 D2 D3  current D0
 +    cap 10[68] = PCI-Express 1 endpoint max data 128(4096) link x4(x8)
 +                 speed 2.5(2.5)
 +    cap 05[98] = MSI supports 1 message, 64 bit
 +    cap 11[b0] = MSI-X supports 1 message in map 0x14 enabled
 +ecap 0001[100] = AER 1 0 fatal 1 non-fatal 0 corrected
 +pcib7@pci0:6:0:0:       class=0x060400 card=0x03691014 chip=0x0452101b rev=0x01 hdr=0x01
 +    vendor     = 'Vitesse Semiconductor'
 +    device     = 'VSC452 [SuperBMC]'
 +    class      = bridge
 +    subclass   = PCI-PCI
 +    cap 05[50] = MSI supports 2 messages, 64 bit
 +    cap 01[78] = powerspec 3  supports D0 D3  current D0
 +    cap 10[80] = PCI-Express 1 PCI bridge max data 128(128) link x1(x1)
 +                 speed 2.5(2.5)
 +    cap 0d[a4] = PCI Bridge card=0x03691014
 +ecap 0002[100] = VC 1 max VC0
 +vgapci0@pci0:7:0:0:     class=0x030000 card=0x03691014 chip=0x0530102b rev=0x00 hdr=0x00
 +    vendor     = 'Matrox Graphics, Inc.'
 +    device     = 'MGA G200EV'
 +    class      = display
 +    subclass   = VGA
 +    bar   [10] = type Prefetchable Memory, range 32, base 0x96000000, size 16777216, enabled
 +    bar   [14] = type Memory, range 32, base 0x97800000, size 16384, enabled
 +    bar   [18] = type Memory, range 32, base 0x97000000, size 8388608, enabled
 +    cap 01[dc] = powerspec 1  supports D0 D3  current D0
 +hostb1@pci0:255:0:0:    class=0x060000 card=0x80868086 chip=0x2c708086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series QuickPath Architecture Generic Non-core Registers'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb2@pci0:255:0:1:    class=0x060000 card=0x80868086 chip=0x2d818086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series QuickPath Architecture System Address Decoder'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb3@pci0:255:2:0:    class=0x060000 card=0x80868086 chip=0x2d908086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series QPI Link 0'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb4@pci0:255:2:1:    class=0x060000 card=0x80868086 chip=0x2d918086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series QPI Physical 0'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb5@pci0:255:2:2:    class=0x060000 card=0x80868086 chip=0x2d928086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Mirror Port Link 0'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb6@pci0:255:2:3:    class=0x060000 card=0x80868086 chip=0x2d938086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Mirror Port Link 1'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb7@pci0:255:2:4:    class=0x060000 card=0x80868086 chip=0x2d948086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series QPI Link 1'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb8@pci0:255:2:5:    class=0x060000 card=0x80868086 chip=0x2d958086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series QPI Physical 1'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb9@pci0:255:3:0:    class=0x060000 card=0x80868086 chip=0x2d988086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Registers'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb10@pci0:255:3:1:   class=0x060000 card=0x80868086 chip=0x2d998086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Target Address Decoder'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb11@pci0:255:3:2:   class=0x060000 card=0x80868086 chip=0x2d9a8086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller RAS Registers'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb12@pci0:255:3:4:   class=0x060000 card=0x80868086 chip=0x2d9c8086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Test Registers'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb13@pci0:255:4:0:   class=0x060000 card=0x80868086 chip=0x2da08086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Channel 0 Control'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb14@pci0:255:4:1:   class=0x060000 card=0x80868086 chip=0x2da18086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Channel 0 Address'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb15@pci0:255:4:2:   class=0x060000 card=0x80868086 chip=0x2da28086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Channel 0 Rank'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb16@pci0:255:4:3:   class=0x060000 card=0x80868086 chip=0x2da38086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Channel 0 Thermal Control'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb17@pci0:255:5:0:   class=0x060000 card=0x80868086 chip=0x2da88086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Channel 1 Control'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb18@pci0:255:5:1:   class=0x060000 card=0x80868086 chip=0x2da98086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Channel 1 Address'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb19@pci0:255:5:2:   class=0x060000 card=0x80868086 chip=0x2daa8086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Channel 1 Rank'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb20@pci0:255:5:3:   class=0x060000 card=0x80868086 chip=0x2dab8086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Channel 1 Thermal Control'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb21@pci0:255:6:0:   class=0x060000 card=0x80868086 chip=0x2db08086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Channel 2 Control'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb22@pci0:255:6:1:   class=0x060000 card=0x80868086 chip=0x2db18086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Channel 2 Address'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb23@pci0:255:6:2:   class=0x060000 card=0x80868086 chip=0x2db28086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Channel 2 Rank'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +hostb24@pci0:255:6:3:   class=0x060000 card=0x80868086 chip=0x2db38086 rev=0x02 hdr=0x00
 +    vendor     = 'Intel Corporation'
 +    device     = 'Xeon 5600 Series Integrated Memory Controller Channel 2 Thermal Control'
 +    class      = bridge
 +    subclass   = HOST-PCI
 +
 +</code>
documentation/examples/ibm_system_x3550_m3.txt · Last modified: 2013/09/19 22:20 by 127.0.0.1
Except where otherwise noted, content on this wiki is licensed under the following license: BSD 2-Clause
Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki