Differences

This shows you the differences between two versions of the page.

--- documentation:examples:ipv6_only_bgp_ospf_ripng_isis_lab_frrouting [2020/05/18 18:01] – add missing configuration part fabien
+++ documentation:examples:ipv6_only_bgp_ospf_ripng_isis_lab_frrouting [2021/02/19 17:17] (current) – fabien
@@ Line 30: / Line 30: @@
 Download BSDRP serial image (prevent to have to use an X display) on Sourceforge.
-==== Download Lab scripts =====
+==== Configure lab with netlab =====
-Some scripts have been done to configure bridge and tap interfaces on a server. Also, they linked router vtnet interfaces with the good tap in bhyve
+=== Quick installation of netlab ===
-Those scripts are comming soon...
+Pull the repository https://github.com/stardco/netlab.git
+In root mode :
+<code>
+make install
+</code>
+=== Information to add on templates.conf ===
+BSDRP-1.96-full-amd64-serial.img must be on /usr/local/etc/netlab/templates/
+<code>
+BSDRP_196:BSD:BSDRP-1.96-full-amd64-serial.img:
+</code>
+=== Information to add on areas.conf ===
+<code>
+LAB_v6only:LAB_v6only_GW BGP_R1 BGP_R2 BGP_R3 BGP_R4 BGPC_H1 ISIS_R1 ISIS_R2 ISIS_R3 ISIS_R4 ISISC_H1 OSPF_R1 OSPF_R2 OSPF_R3 OSPF_R4 OSPFC_H1 RIPNG_R1 RIPNG_R2 RIPNG_R3 RIPNG_R4 RIPNGC_H1:
+</code>
+=== Information to add on switches.conf ===
+<code>
+L2:ogb1:ogb1p1 ogb1p2
+L2:bgb1:bgb1p1 bgb1p2
+L2:borb1:borb1p1 borb1p2
+L2:brb1:brb1p1 brb1p2 brb1p3 brb1p4
+L2:bcb1:bcb1p1 bcb1p2
+L2:birb1:birb1p1 birb1p2
+L2:irb1:irb1p1 irb1p2
+L2:irb2:irb2p1 irb2p2
+L2:irb3:irb3p1 irb3p2
+L2:irb4:irb4p1 irb4p2
+L2:icb1:icb1p1 icb1p2
+L2:irrb1:irrb1p1 irrb1p2
+L2:orb1:orb1p1 orb1p2
+L2:orb2:orb2p1 orb2p2
+L2:orb3:orb3p1 orb3p2
+L2:orb4:orb4p1 orb4p2
+L2:ocb1:ocb1p1 ocb1p2
+L2:orrb1:orrb1p1 orrb1p2
+L2:rrb1:rrb1p1 rrb1p2
+L2:rrb2:rrb2p1 rrb2p2
+L2:rrb3:rrb3p1 rrb3p2
+L2:rrb4:rrb4p1 rrb4p2
+L2:rcb1:rcb1p1 rcb1p2
+</code>
+=== Information to add on machines.conf ===
+<code>
+LAB_v6only_GW:BSDRP_196:1:256:3003:bbb1p3 ogb1p1 bgb1p1:
+BGP_R1:BSDRP_196:1:256:3200:brb1p1 borb1p1 bgb1p2:
+BGP_R2:BSDRP_196:1:256:3201:brb1p2 bcb1p1:
+BGP_R3:BSDRP_196:1:256:3202:brb1p3 birb1p1:
+BGP_R4:BSDRP_196:1:256:3203:brb1p4:
+BGPC_H1:BSDRP_196:1:256:3204:bcb1p2:
+ISIS_R1:BSDRP_196:1:256:3205:irb1p1 irb4p2 birb1p2:
+ISIS_R2:BSDRP_196:1:256:3206:irb1p2 irb2p1 icb1p1:
+ISIS_R3:BSDRP_196:1:256:3207:irb2p2 irb3p1 irrb1p1:
+ISIS_R4:BSDRP_196:1:256:3208:irb4p1 irb2p2:
+ISISC_H1:BSDRP_196:1:256:3209:icb1p2:
+OSPF_R1:BSDRP_196:1:256:3210:orb1p1 orb4p2 borb1p2 ogb1p2:
+OSPF_R2:BSDRP_196:1:256:3211:orb1p2 orb2p1 ocb1p1:
+OSPF_R3:BSDRP_196:1:256:3212:orb2p2 orb3p1 orrb1p1:
+OSPF_R4:BSDRP_196:1:256:3213:orb3p2 orb4p1:
+OSPFC_H1:BSDRP_196:1:256:3214:ocb1p2:
+RIPNG_R1:BSDRP_196:1:256:3215:rrb1p1 rrb4p2 orrb1p2:
+RIPNG_R2:BSDRP_196:1:256:3216:rrb1p2 rrb2p1 rcb1p1:
+RIPNG_R3:BSDRP_196:1:256:3217:rrb2p2 rrb3p1 irrb1p2:
+RIPNG_R4:BSDRP_196:1:256:3218:rrb4p1 rrb3p2:
+RIPNGC_H1:BSDRP_196:1:256:3219:rcb1p2:
+</code>
+=== Launch the lab ===
+In root mode !
+<code>
+netlab load -a LAB_v6only
+</code>
 ===== Routers configuration =====