documentation:examples:multicast_with_pim-sm
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
documentation:examples:multicast_with_pim-sm [2019/11/08 15:18] – [Checking NIC drivers and Bhyve compatibility with multicast] olivier | documentation:examples:multicast_with_pim-sm [2019/11/08 19:22] (current) – [Checking NIC drivers and Bhyve compatibility with multicast] olivier | ||
---|---|---|---|
Line 153: | Line 153: | ||
</ | </ | ||
- | On the direct connected VM2, start a mcast listener (server receiving), it should receive multicast flow | + | On the direct connected VM2, start to check if in non-promiscious mode it sees mcast packets comming: |
+ | < | ||
+ | [root@VM2]~# | ||
+ | tcpdump: verbose output suppressed, use -v or -vv for full protocol decode | ||
+ | listening on em0, link-type EN10MB (Ethernet), capture size 262144 bytes | ||
+ | 15: | ||
+ | 15: | ||
+ | 2 packets captured | ||
+ | 2 packets received by filter | ||
+ | 0 packets dropped by kernel | ||
+ | </ | ||
+ | |||
+ | => VM2 is receiving mcast packets from 10.0.12.1 to mcast group 239.1.1.1. | ||
+ | Now on VM2 start a mcast listener (server receiving), it should receive multicast flow | ||
< | < | ||
- | [root@VM2]~# | + | [root@VM2]~# |
------------------------------------------------------------ | ------------------------------------------------------------ | ||
Server listening on UDP port 5001 | Server listening on UDP port 5001 | ||
Line 177: | Line 190: | ||
=> Notice the mcast receiver is correctly receiving at 1Mb/s. | => Notice the mcast receiver is correctly receiving at 1Mb/s. | ||
- | Here is a non working example: | + | Here is a non working example |
< | < | ||
[root@VM2]~# | [root@VM2]~# |
documentation/examples/multicast_with_pim-sm.txt · Last modified: 2019/11/08 19:22 by olivier