documentation:examples:nat64
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | |||
documentation:examples:nat64 [2020/01/02 19:33] – [Stateless (stl)] olivier | documentation:examples:nat64 [2020/01/02 19:36] (current) – [Stateless (stl)] olivier | ||
---|---|---|---|
Line 268: | Line 268: | ||
From IPv4 only host, ping NAT64 IPv4 address corresponding to VM3 IPv6 address: | From IPv4 only host, ping NAT64 IPv4 address corresponding to VM3 IPv6 address: | ||
< | < | ||
- | [root@v4TST64]~# ping -c 3 2.2.1.1 | + | [root@VM3]~# ping -c 3 2.2.1.1 |
PING 2.2.1.1 (2.2.1.1): 56 data bytes | PING 2.2.1.1 (2.2.1.1): 56 data bytes | ||
64 bytes from 2.2.1.1: icmp_seq=0 ttl=63 time=17.147 ms | 64 bytes from 2.2.1.1: icmp_seq=0 ttl=63 time=17.147 ms | ||
Line 279: | Line 279: | ||
</ | </ | ||
- | And check on VM3 | + | And check on the NAT router VM2 some stats: |
< | < | ||
- | [root@rTST64]~# ipfw nat64stl NAT64 stats | + | [root@VM2]~# ipfw nat64stl NAT64 stats |
nat64stl NAT64 | nat64stl NAT64 | ||
6 packets translated from IPv6 to IPv4 | 6 packets translated from IPv6 to IPv4 |
documentation/examples/nat64.txt · Last modified: 2020/01/02 19:36 by olivier