documentation:examples:pc_engines_apu
no way to compare when less than two revisions
Differences
This shows you the differences between two versions of the page.
— | documentation:examples:pc_engines_apu [2014/03/14 14:45] (current) – created - external edit 127.0.0.1 | ||
---|---|---|---|
Line 1: | Line 1: | ||
+ | ====== PC Engines APU ====== | ||
+ | ===== dmesg ===== | ||
+ | |||
+ | < | ||
+ | Copyright (c) 1992-2014 The FreeBSD Project. | ||
+ | Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 | ||
+ | The Regents of the University of California. All rights reserved. | ||
+ | FreeBSD is a registered trademark of The FreeBSD Foundation. | ||
+ | FreeBSD 11.0-CURRENT #1 r263096M: Wed Mar 12 23:05:33 CET 2014 | ||
+ | root@orange.bsdrp.net:/ | ||
+ | FreeBSD clang version 3.4 (tags/ | ||
+ | CPU: AMD G-T40E Processor (1000.02-MHz K8-class CPU) | ||
+ | Origin=" | ||
+ | Features=0x178bfbff< | ||
+ | Features2=0x802209< | ||
+ | AMD Features=0x2e500800< | ||
+ | AMD Features2=0x35ff< | ||
+ | TSC: P-state invariant, performance statistics | ||
+ | real memory | ||
+ | avail memory = 2028584960 (1934 MB) | ||
+ | Event timer " | ||
+ | ACPI APIC Table: < | ||
+ | FreeBSD/ | ||
+ | FreeBSD/ | ||
+ | cpu0 (BSP): APIC ID: 0 | ||
+ | cpu1 (AP): APIC ID: 1 | ||
+ | ioapic0 <Version 2.1> irqs 0-23 on motherboard | ||
+ | netmap: loaded module | ||
+ | random: < | ||
+ | module_register_init: | ||
+ | cryptosoft0: | ||
+ | acpi0: <CORE COREBOOT> | ||
+ | acpi0: Power Button (fixed) | ||
+ | cpu0: <ACPI CPU> on acpi0 | ||
+ | cpu1: <ACPI CPU> on acpi0 | ||
+ | atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 | ||
+ | Event timer " | ||
+ | attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 | ||
+ | Timecounter " | ||
+ | Event timer " | ||
+ | hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 | ||
+ | Timecounter " | ||
+ | Event timer " | ||
+ | Event timer " | ||
+ | Timecounter " | ||
+ | acpi_timer0: | ||
+ | pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 | ||
+ | pci0: <ACPI PCI bus> on pcib0 | ||
+ | pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0 | ||
+ | pci1: <ACPI PCI bus> on pcib1 | ||
+ | re0: <RealTek 8168/8111 B/ | ||
+ | re0: Using 1 MSI-X message | ||
+ | re0: ASPM disabled | ||
+ | re0: Chip rev. 0x2c000000 | ||
+ | re0: MAC rev. 0x00200000 | ||
+ | miibus0: <MII bus> on re0 | ||
+ | rgephy0: < | ||
+ | rgephy0: | ||
+ | re0: Ethernet address: 00: | ||
+ | 001.000008 [2258] netmap_attach | ||
+ | pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0 | ||
+ | pci2: <ACPI PCI bus> on pcib2 | ||
+ | re1: <RealTek 8168/8111 B/ | ||
+ | re1: Using 1 MSI-X message | ||
+ | re1: ASPM disabled | ||
+ | re1: Chip rev. 0x2c000000 | ||
+ | re1: MAC rev. 0x00200000 | ||
+ | miibus1: <MII bus> on re1 | ||
+ | rgephy1: < | ||
+ | rgephy1: | ||
+ | re1: Ethernet address: 00: | ||
+ | 001.000009 [2258] netmap_attach | ||
+ | pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0 | ||
+ | pci3: <ACPI PCI bus> on pcib3 | ||
+ | re2: <RealTek 8168/8111 B/ | ||
+ | re2: Using 1 MSI-X message | ||
+ | re2: ASPM disabled | ||
+ | re2: Chip rev. 0x2c000000 | ||
+ | re2: MAC rev. 0x00200000 | ||
+ | miibus2: <MII bus> on re2 | ||
+ | rgephy2: < | ||
+ | rgephy2: | ||
+ | re2: Ethernet address: 00: | ||
+ | 001.000010 [2258] netmap_attach | ||
+ | pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0 | ||
+ | pci4: <ACPI PCI bus> on pcib4 | ||
+ | ath0: <Atheros 9280> mem 0xfea00000-0xfea0ffff at device 0.0 on pci4 | ||
+ | ath0: [HT] enabling HT modes | ||
+ | ath0: [HT] 1 stream STBC receive enabled | ||
+ | ath0: [HT] 1 stream STBC transmit enabled | ||
+ | ath0: [HT] 2 RX streams; 2 TX streams | ||
+ | ath0: AR9280 mac 128.2 RF5133 phy 13.0 | ||
+ | ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 | ||
+ | ahci0: <ATI IXP700 AHCI SATA controller> | ||
+ | ahci0: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported | ||
+ | ahcich0: <AHCI channel> at channel 0 on ahci0 | ||
+ | ahcich1: <AHCI channel> at channel 1 on ahci0 | ||
+ | ahcich2: <AHCI channel> at channel 2 on ahci0 | ||
+ | ahcich3: <AHCI channel> at channel 3 on ahci0 | ||
+ | ohci0: <AMD SB7x0/ | ||
+ | usbus0 on ohci0 | ||
+ | ehci0: <AMD SB7x0/ | ||
+ | usbus1: EHCI version 1.0 | ||
+ | usbus1 on ehci0 | ||
+ | ohci1: <AMD SB7x0/ | ||
+ | usbus2 on ohci1 | ||
+ | ehci1: <AMD SB7x0/ | ||
+ | usbus3: EHCI version 1.0 | ||
+ | usbus3 on ehci1 | ||
+ | pci0: <serial bus, SMBus> at device 20.0 (no driver attached) | ||
+ | atapci0: <ATI IXP700/800 UDMA133 controller> | ||
+ | ata0: <ATA channel> at channel 0 on atapci0 | ||
+ | ata1: <ATA channel> at channel 1 on atapci0 | ||
+ | isab0: <PCI-ISA bridge> at device 20.3 on pci0 | ||
+ | isa0: <ISA bus> on isab0 | ||
+ | pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0 | ||
+ | pcib5: failed to allocate initial memory window: 0-0xfffff | ||
+ | pcib5: failed to allocate initial prefetch window: 0-0xfffff | ||
+ | pci6: <ACPI PCI bus> on pcib5 | ||
+ | ohci2: <AMD SB7x0/ | ||
+ | usbus4 on ohci2 | ||
+ | pcib6: <ACPI PCI-PCI bridge> at device 21.0 on pci0 | ||
+ | pci5: <ACPI PCI bus> on pcib6 | ||
+ | ohci3: <AMD SB7x0/ | ||
+ | usbus5 on ohci3 | ||
+ | ehci2: <AMD SB7x0/ | ||
+ | usbus6: EHCI version 1.0 | ||
+ | usbus6 on ehci2 | ||
+ | acpi_button0: | ||
+ | orm0: <ISA Option ROM> at iomem 0xee000-0xeffff on isa0 | ||
+ | uart0: <16550 or compatible> | ||
+ | uart0: console (115200, | ||
+ | uart1: <16550 or compatible> | ||
+ | acpi_throttle0: | ||
+ | Timecounters tick every 1.000 msec | ||
+ | IPsec: Initialized Security Association Processing. | ||
+ | random: unblocking device. | ||
+ | usbus0: 12Mbps Full Speed USB v1.0 | ||
+ | usbus1: 480Mbps High Speed USB v2.0 | ||
+ | usbus2: 12Mbps Full Speed USB v1.0 | ||
+ | usbus3: 480Mbps High Speed USB v2.0 | ||
+ | ugen0.1: <ATI> at usbus0 | ||
+ | uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 | ||
+ | ugen1.1: <ATI> at usbus1 | ||
+ | uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 | ||
+ | ugen2.1: <ATI> at usbus2 | ||
+ | uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 | ||
+ | ugen3.1: <ATI> at usbus3 | ||
+ | uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 | ||
+ | usbus4: 12Mbps Full Speed USB v1.0 | ||
+ | usbus5: 12Mbps Full Speed USB v1.0 | ||
+ | usbus6: 480Mbps High Speed USB v2.0 | ||
+ | ugen4.1: <ATI> at usbus4 | ||
+ | uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 | ||
+ | ugen5.1: <ATI> at usbus5 | ||
+ | uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 | ||
+ | ugen6.1: <ATI> at usbus6 | ||
+ | uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 | ||
+ | uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 | ||
+ | uhub4: 2 ports with 2 removable, self powered | ||
+ | uhub0: 5 ports with 5 removable, self powered | ||
+ | uhub2: 5 ports with 5 removable, self powered | ||
+ | uhub5: 4 ports with 4 removable, self powered | ||
+ | uhub6: 4 ports with 4 removable, self powered | ||
+ | uhub1: 5 ports with 5 removable, self powered | ||
+ | uhub3: 5 ports with 5 removable, self powered | ||
+ | ugen6.2: < | ||
+ | umass0: <Generic Flash Card ReaderWriter, | ||
+ | umass0: | ||
+ | umass0:6:0: Attached to scbus6 | ||
+ | ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 | ||
+ | ada0: < | ||
+ | ada0: Serial Number YTAK13450504 | ||
+ | ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) | ||
+ | ada0: Command Queueing enabled | ||
+ | ada0: 15258MB (31248704 512 byte sectors: 16H 63S/T 16383C) | ||
+ | ada0: Previously was known as ad4 | ||
+ | da0 at umass-sim0 bus 0 scbus6 target 0 lun 0 | ||
+ | da0: < | ||
+ | da0: Serial Number 058F63666485 | ||
+ | da0: 40.000MB/s transfers | ||
+ | da0: Attempt to query device size failed: NOT READY, Medium not present | ||
+ | da0: quirks=0x2< | ||
+ | SMP: AP CPU #1 Launched! | ||
+ | Timecounter " | ||
+ | amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4 | ||
+ | </ | ||
+ | |||
+ | ===== pciconf ===== | ||
+ | |||
+ | < | ||
+ | hostb0@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = bridge | ||
+ | subclass | ||
+ | pcib1@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = bridge | ||
+ | subclass | ||
+ | cap 01[50] = powerspec 3 supports D0 D3 current D0 | ||
+ | cap 10[58] = PCI-Express 2 root port slot max data 128(128) link x1(x1) | ||
+ | speed 2.5(5.0) ASPM L0s/ | ||
+ | cap 05[a0] = MSI supports 1 message, 64 bit | ||
+ | cap 0d[b0] = PCI Bridge card=0x12341022 | ||
+ | cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 | ||
+ | pcib2@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = bridge | ||
+ | subclass | ||
+ | cap 01[50] = powerspec 3 supports D0 D3 current D0 | ||
+ | cap 10[58] = PCI-Express 2 root port slot max data 128(128) link x1(x1) | ||
+ | speed 2.5(5.0) ASPM L0s/ | ||
+ | cap 05[a0] = MSI supports 1 message, 64 bit | ||
+ | cap 0d[b0] = PCI Bridge card=0x12341022 | ||
+ | cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 | ||
+ | pcib3@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = bridge | ||
+ | subclass | ||
+ | cap 01[50] = powerspec 3 supports D0 D3 current D0 | ||
+ | cap 10[58] = PCI-Express 2 root port slot max data 128(128) link x1(x1) | ||
+ | speed 2.5(5.0) ASPM L0s/ | ||
+ | cap 05[a0] = MSI supports 1 message, 64 bit | ||
+ | cap 0d[b0] = PCI Bridge card=0x12341022 | ||
+ | cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 | ||
+ | pcib4@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = bridge | ||
+ | subclass | ||
+ | cap 01[50] = powerspec 3 supports D0 D3 current D0 | ||
+ | cap 10[58] = PCI-Express 2 root port slot max data 128(128) link x1(x1) | ||
+ | speed 2.5(5.0) ASPM L1(L0s/L1) | ||
+ | cap 05[a0] = MSI supports 1 message, 64 bit | ||
+ | cap 0d[b0] = PCI Bridge card=0x12341022 | ||
+ | cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 | ||
+ | ahci0@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = mass storage | ||
+ | subclass | ||
+ | bar [10] = type I/O Port, range 32, base 0x4020, size 8, enabled | ||
+ | bar [14] = type I/O Port, range 32, base 0x4040, size 4, enabled | ||
+ | bar [18] = type I/O Port, range 32, base 0x4028, size 8, enabled | ||
+ | bar [1c] = type I/O Port, range 32, base 0x4044, size 4, enabled | ||
+ | bar [20] = type I/O Port, range 32, base 0x4000, size 16, enabled | ||
+ | bar [24] = type Memory, range 32, base 0xfeb08000, size 1024, enabled | ||
+ | cap 12[70] = SATA Index-Data Pair | ||
+ | cap 13[a4] = PCI Advanced Features: FLR TP | ||
+ | ohci0@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = serial bus | ||
+ | subclass | ||
+ | bar [10] = type Memory, range 32, base 0xfeb04000, size 4096, enabled | ||
+ | ehci0@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = serial bus | ||
+ | subclass | ||
+ | bar [10] = type Memory, range 32, base 0xfeb08400, size 256, enabled | ||
+ | cap 01[c0] = powerspec 2 supports D0 D1 D2 D3 current D0 | ||
+ | cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14 | ||
+ | ohci1@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = serial bus | ||
+ | subclass | ||
+ | bar [10] = type Memory, range 32, base 0xfeb05000, size 4096, enabled | ||
+ | ehci1@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = serial bus | ||
+ | subclass | ||
+ | bar [10] = type Memory, range 32, base 0xfeb08500, size 256, enabled | ||
+ | cap 01[c0] = powerspec 2 supports D0 D1 D2 D3 current D0 | ||
+ | cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14 | ||
+ | none0@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = serial bus | ||
+ | subclass | ||
+ | atapci0@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = mass storage | ||
+ | subclass | ||
+ | bar [20] = type I/O Port, range 32, base 0x4010, size 16, enabled | ||
+ | isab0@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = bridge | ||
+ | subclass | ||
+ | pcib5@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = bridge | ||
+ | subclass | ||
+ | ohci2@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = serial bus | ||
+ | subclass | ||
+ | bar [10] = type Memory, range 32, base 0xfeb06000, size 4096, enabled | ||
+ | pcib6@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = bridge | ||
+ | subclass | ||
+ | cap 01[50] = powerspec 3 supports D0 D1 D2 D3 current D0 | ||
+ | cap 10[58] = PCI-Express 2 root port max data 128(128) link x16(x4) | ||
+ | speed undef(2.5) ASPM disabled(L0s/ | ||
+ | cap 05[a0] = MSI supports 1 message, 64 bit | ||
+ | cap 0d[b0] = PCI Bridge card=0x00001002 | ||
+ | cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 | ||
+ | ohci3@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = serial bus | ||
+ | subclass | ||
+ | bar [10] = type Memory, range 32, base 0xfeb07000, size 4096, enabled | ||
+ | ehci2@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = serial bus | ||
+ | subclass | ||
+ | bar [10] = type Memory, range 32, base 0xfeb08600, size 256, enabled | ||
+ | cap 01[c0] = powerspec 2 supports D0 D1 D2 D3 current D0 | ||
+ | cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14 | ||
+ | hostb1@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = bridge | ||
+ | subclass | ||
+ | hostb2@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = bridge | ||
+ | subclass | ||
+ | hostb3@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = bridge | ||
+ | subclass | ||
+ | hostb4@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = bridge | ||
+ | subclass | ||
+ | cap 0f[f0] = unknown | ||
+ | hostb5@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = bridge | ||
+ | subclass | ||
+ | hostb6@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = bridge | ||
+ | subclass | ||
+ | hostb7@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = bridge | ||
+ | subclass | ||
+ | hostb8@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = bridge | ||
+ | subclass | ||
+ | re0@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = network | ||
+ | subclass | ||
+ | bar [10] = type I/O Port, range 32, base 0x1000, size 256, enabled | ||
+ | bar [18] = type Memory, range 64, base 0xfe500000, size 4096, enabled | ||
+ | bar [20] = type Prefetchable Memory, range 64, base 0xfe400000, size 16384, enabled | ||
+ | cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0 | ||
+ | cap 05[50] = MSI supports 1 message, 64 bit | ||
+ | cap 10[70] = PCI-Express 2 endpoint IRQ 1 max data 128(128) link x1(x1) | ||
+ | speed 2.5(2.5) ASPM disabled(L0s/ | ||
+ | cap 11[b0] = MSI-X supports 4 messages, enabled | ||
+ | Table in map 0x20[0x0], PBA in map 0x20[0x800] | ||
+ | cap 03[d0] = VPD | ||
+ | re1@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = network | ||
+ | subclass | ||
+ | bar [10] = type I/O Port, range 32, base 0x2000, size 256, enabled | ||
+ | bar [18] = type Memory, range 64, base 0xfe700000, size 4096, enabled | ||
+ | bar [20] = type Prefetchable Memory, range 64, base 0xfe600000, size 16384, enabled | ||
+ | cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0 | ||
+ | cap 05[50] = MSI supports 1 message, 64 bit | ||
+ | cap 10[70] = PCI-Express 2 endpoint IRQ 1 max data 128(128) link x1(x1) | ||
+ | speed 2.5(2.5) ASPM disabled(L0s/ | ||
+ | cap 11[b0] = MSI-X supports 4 messages, enabled | ||
+ | Table in map 0x20[0x0], PBA in map 0x20[0x800] | ||
+ | cap 03[d0] = VPD | ||
+ | re2@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = network | ||
+ | subclass | ||
+ | bar [10] = type I/O Port, range 32, base 0x3000, size 256, enabled | ||
+ | bar [18] = type Memory, range 64, base 0xfe900000, size 4096, enabled | ||
+ | bar [20] = type Prefetchable Memory, range 64, base 0xfe800000, size 16384, enabled | ||
+ | cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0 | ||
+ | cap 05[50] = MSI supports 1 message, 64 bit | ||
+ | cap 10[70] = PCI-Express 2 endpoint IRQ 1 max data 128(128) link x1(x1) | ||
+ | speed 2.5(2.5) ASPM disabled(L0s/ | ||
+ | cap 11[b0] = MSI-X supports 4 messages, enabled | ||
+ | Table in map 0x20[0x0], PBA in map 0x20[0x800] | ||
+ | cap 03[d0] = VPD | ||
+ | ath0@pci0: | ||
+ | vendor | ||
+ | device | ||
+ | class = network | ||
+ | bar [10] = type Memory, range 64, base 0xfea00000, size 65536, enabled | ||
+ | cap 01[40] = powerspec 2 supports D0 D1 D3 current D0 | ||
+ | cap 05[50] = MSI supports 1 message | ||
+ | cap 10[60] = PCI-Express 1 legacy endpoint max data 128(128) link x1(x1) | ||
+ | speed 2.5(2.5) ASPM L1(L1) | ||
+ | cap 11[90] = MSI-X supports 1 message | ||
+ | Table in map 0x10[0x0], PBA in map 0x10[0x0] | ||
+ | </ |
documentation/examples/pc_engines_apu.txt · Last modified: 2014/03/14 14:45 by 127.0.0.1