User Tools

Site Tools


documentation:examples:pc_engines_apu

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

documentation:examples:pc_engines_apu [2014/03/14 14:45] (current)
Line 1: Line 1:
 +====== PC Engines APU ======
  
 +===== dmesg =====
 +
 +<​code>​
 +Copyright (c) 1992-2014 The FreeBSD Project.
 +Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 +        The Regents of the University of California. All rights reserved.
 +FreeBSD is a registered trademark of The FreeBSD Foundation.
 +FreeBSD 11.0-CURRENT #1 r263096M: Wed Mar 12 23:05:33 CET 2014
 +    root@orange.bsdrp.net:/​usr/​obj/​EINBOX.amd64/​usr/​local/​BSDRP/​EINBOX/​FreeBSD/​src/​sys/​amd64 amd64
 +FreeBSD clang version 3.4 (tags/​RELEASE_34/​final 197956) 20140216
 +CPU: AMD G-T40E Processor (1000.02-MHz K8-class CPU)
 +  Origin="​AuthenticAMD" ​ Id=0x500f20 ​ Family=0x14 ​ Model=0x2 ​ Stepping=0
 +  Features=0x178bfbff<​FPU,​VME,​DE,​PSE,​TSC,​MSR,​PAE,​MCE,​CX8,​APIC,​SEP,​MTRR,​PGE,​MCA,​CMOV,​PAT,​PSE36,​CLFLUSH,​MMX,​FXSR,​SSE,​SSE2,​HTT>​
 +  Features2=0x802209<​SSE3,​MON,​SSSE3,​CX16,​POPCNT>​
 +  AMD Features=0x2e500800<​SYSCALL,​NX,​MMX+,​FFXSR,​Page1GB,​RDTSCP,​LM>​
 +  AMD Features2=0x35ff<​LAHF,​CMP,​SVM,​ExtAPIC,​CR8,​ABM,​SSE4A,​MAS,​Prefetch,​IBS,​SKINIT,​WDT>​
 +  TSC: P-state invariant, performance statistics
 +real memory ​ = 2115428352 (2017 MB)
 +avail memory = 2028584960 (1934 MB)
 +Event timer "​LAPIC"​ quality 400
 +ACPI APIC Table: <​CORE ​  ​COREBOOT>​
 +FreeBSD/​SMP:​ Multiprocessor System Detected: 2 CPUs
 +FreeBSD/​SMP:​ 1 package(s) x 2 core(s)
 + cpu0 (BSP): APIC ID:  0
 + cpu1 (AP): APIC ID:  1
 +ioapic0 <Version 2.1> irqs 0-23 on motherboard
 +netmap: loaded module
 +random: <​Software,​ Yarrow> initialized
 +module_register_init:​ MOD_LOAD (vesa, 0xffffffff808c64e0,​ 0) error 19
 +cryptosoft0:​ <​software crypto> on motherboard
 +acpi0: <CORE COREBOOT>​ on motherboard
 +acpi0: Power Button (fixed)
 +cpu0: <ACPI CPU> on acpi0
 +cpu1: <ACPI CPU> on acpi0
 +atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
 +Event timer "​RTC"​ frequency 32768 Hz quality 0
 +attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
 +Timecounter "​i8254"​ frequency 1193182 Hz quality 0
 +Event timer "​i8254"​ frequency 1193182 Hz quality 100
 +hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
 +Timecounter "​HPET"​ frequency 14318180 Hz quality 950
 +Event timer "​HPET"​ frequency 14318180 Hz quality 550
 +Event timer "​HPET1"​ frequency 14318180 Hz quality 450
 +Timecounter "​ACPI-fast"​ frequency 3579545 Hz quality 900
 +acpi_timer0:​ <32-bit timer at 3.579545MHz>​ port 0x808-0x80b on acpi0
 +pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 +pci0: <ACPI PCI bus> on pcib0
 +pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
 +pci1: <ACPI PCI bus> on pcib1
 +re0: <RealTek 8168/8111 B/​C/​CP/​D/​DP/​E/​F/​G PCIe Gigabit Ethernet>​ port 0x1000-0x10ff mem 0xfe500000-0xfe500fff,​0xfe400000-0xfe403fff at device 0.0 on pci1
 +re0: Using 1 MSI-X message
 +re0: ASPM disabled
 +re0: Chip rev. 0x2c000000
 +re0: MAC rev. 0x00200000
 +miibus0: <MII bus> on re0
 +rgephy0: <​RTL8169S/​8110S/​8211 1000BASE-T media interface>​ PHY 1 on miibus0
 +rgephy0: ​ none, 10baseT, 10baseT-FDX,​ 10baseT-FDX-flow,​ 100baseTX, 100baseTX-FDX,​ 100baseTX-FDX-flow,​ 1000baseT, 1000baseT-master,​ 1000baseT-FDX,​ 1000baseT-FDX-master,​ 1000baseT-FDX-flow,​ 1000baseT-FDX-flow-master,​ auto, auto-flow
 +re0: Ethernet address: 00:​0d:​b9:​33:​12:​64
 +001.000008 [2258] netmap_attach ​            ​success for re0
 +pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0
 +pci2: <ACPI PCI bus> on pcib2
 +re1: <RealTek 8168/8111 B/​C/​CP/​D/​DP/​E/​F/​G PCIe Gigabit Ethernet>​ port 0x2000-0x20ff mem 0xfe700000-0xfe700fff,​0xfe600000-0xfe603fff at device 0.0 on pci2
 +re1: Using 1 MSI-X message
 +re1: ASPM disabled
 +re1: Chip rev. 0x2c000000
 +re1: MAC rev. 0x00200000
 +miibus1: <MII bus> on re1
 +rgephy1: <​RTL8169S/​8110S/​8211 1000BASE-T media interface>​ PHY 1 on miibus1
 +rgephy1: ​ none, 10baseT, 10baseT-FDX,​ 10baseT-FDX-flow,​ 100baseTX, 100baseTX-FDX,​ 100baseTX-FDX-flow,​ 1000baseT, 1000baseT-master,​ 1000baseT-FDX,​ 1000baseT-FDX-master,​ 1000baseT-FDX-flow,​ 1000baseT-FDX-flow-master,​ auto, auto-flow
 +re1: Ethernet address: 00:​0d:​b9:​33:​12:​65
 +001.000009 [2258] netmap_attach ​            ​success for re1
 +pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0
 +pci3: <ACPI PCI bus> on pcib3
 +re2: <RealTek 8168/8111 B/​C/​CP/​D/​DP/​E/​F/​G PCIe Gigabit Ethernet>​ port 0x3000-0x30ff mem 0xfe900000-0xfe900fff,​0xfe800000-0xfe803fff at device 0.0 on pci3
 +re2: Using 1 MSI-X message
 +re2: ASPM disabled
 +re2: Chip rev. 0x2c000000
 +re2: MAC rev. 0x00200000
 +miibus2: <MII bus> on re2
 +rgephy2: <​RTL8169S/​8110S/​8211 1000BASE-T media interface>​ PHY 1 on miibus2
 +rgephy2: ​ none, 10baseT, 10baseT-FDX,​ 10baseT-FDX-flow,​ 100baseTX, 100baseTX-FDX,​ 100baseTX-FDX-flow,​ 1000baseT, 1000baseT-master,​ 1000baseT-FDX,​ 1000baseT-FDX-master,​ 1000baseT-FDX-flow,​ 1000baseT-FDX-flow-master,​ auto, auto-flow
 +re2: Ethernet address: 00:​0d:​b9:​33:​12:​66
 +001.000010 [2258] netmap_attach ​            ​success for re2
 +pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0
 +pci4: <ACPI PCI bus> on pcib4
 +ath0: <Atheros 9280> mem 0xfea00000-0xfea0ffff at device 0.0 on pci4
 +ath0: [HT] enabling HT modes
 +ath0: [HT] 1 stream STBC receive enabled
 +ath0: [HT] 1 stream STBC transmit enabled
 +ath0: [HT] 2 RX streams; 2 TX streams
 +ath0: AR9280 mac 128.2 RF5133 phy 13.0
 +ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
 +ahci0: <ATI IXP700 AHCI SATA controller>​ port 0x4020-0x4027,​0x4040-0x4043,​0x4028-0x402f,​0x4044-0x4047,​0x4000-0x400f mem 0xfeb08000-0xfeb083ff at device 17.0 on pci0
 +ahci0: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported
 +ahcich0: <AHCI channel> at channel 0 on ahci0
 +ahcich1: <AHCI channel> at channel 1 on ahci0
 +ahcich2: <AHCI channel> at channel 2 on ahci0
 +ahcich3: <AHCI channel> at channel 3 on ahci0
 +ohci0: <AMD SB7x0/​SB8x0/​SB9x0 USB controller>​ mem 0xfeb04000-0xfeb04fff at device 18.0 on pci0
 +usbus0 on ohci0
 +ehci0: <AMD SB7x0/​SB8x0/​SB9x0 USB 2.0 controller>​ mem 0xfeb08400-0xfeb084ff at device 18.2 on pci0
 +usbus1: EHCI version 1.0
 +usbus1 on ehci0
 +ohci1: <AMD SB7x0/​SB8x0/​SB9x0 USB controller>​ mem 0xfeb05000-0xfeb05fff at device 19.0 on pci0
 +usbus2 on ohci1
 +ehci1: <AMD SB7x0/​SB8x0/​SB9x0 USB 2.0 controller>​ mem 0xfeb08500-0xfeb085ff at device 19.2 on pci0
 +usbus3: EHCI version 1.0
 +usbus3 on ehci1
 +pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
 +atapci0: <ATI IXP700/800 UDMA133 controller>​ port 0x1f0-0x1f7,​0x3f6,​0x170-0x177,​0x376,​0x4010-0x401f at device 20.1 on pci0
 +ata0: <ATA channel> at channel 0 on atapci0
 +ata1: <ATA channel> at channel 1 on atapci0
 +isab0: <PCI-ISA bridge> at device 20.3 on pci0
 +isa0: <ISA bus> on isab0
 +pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0
 +pcib5: failed to allocate initial memory window: 0-0xfffff
 +pcib5: failed to allocate initial prefetch window: 0-0xfffff
 +pci6: <ACPI PCI bus> on pcib5
 +ohci2: <AMD SB7x0/​SB8x0/​SB9x0 USB controller>​ mem 0xfeb06000-0xfeb06fff at device 20.5 on pci0
 +usbus4 on ohci2
 +pcib6: <ACPI PCI-PCI bridge> at device 21.0 on pci0
 +pci5: <ACPI PCI bus> on pcib6
 +ohci3: <AMD SB7x0/​SB8x0/​SB9x0 USB controller>​ mem 0xfeb07000-0xfeb07fff at device 22.0 on pci0
 +usbus5 on ohci3
 +ehci2: <AMD SB7x0/​SB8x0/​SB9x0 USB 2.0 controller>​ mem 0xfeb08600-0xfeb086ff at device 22.2 on pci0
 +usbus6: EHCI version 1.0
 +usbus6 on ehci2
 +acpi_button0:​ <Power Button> on acpi0
 +orm0: <ISA Option ROM> at iomem 0xee000-0xeffff on isa0
 +uart0: <16550 or compatible>​ at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
 +uart0: console (115200,​n,​8,​1)
 +uart1: <16550 or compatible>​ at port 0x2f8-0x2ff irq 3 on isa0
 +acpi_throttle0:​ <ACPI CPU Throttling>​ on cpu0
 +Timecounters tick every 1.000 msec
 +IPsec: Initialized Security Association Processing.
 +random: unblocking device.
 +usbus0: 12Mbps Full Speed USB v1.0
 +usbus1: 480Mbps High Speed USB v2.0
 +usbus2: 12Mbps Full Speed USB v1.0
 +usbus3: 480Mbps High Speed USB v2.0
 +ugen0.1: <ATI> at usbus0
 +uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
 +ugen1.1: <ATI> at usbus1
 +uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
 +ugen2.1: <ATI> at usbus2
 +uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
 +ugen3.1: <ATI> at usbus3
 +uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
 +usbus4: 12Mbps Full Speed USB v1.0
 +usbus5: 12Mbps Full Speed USB v1.0
 +usbus6: 480Mbps High Speed USB v2.0
 +ugen4.1: <ATI> at usbus4
 +uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
 +ugen5.1: <ATI> at usbus5
 +uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
 +ugen6.1: <ATI> at usbus6
 +uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
 +uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
 +uhub4: 2 ports with 2 removable, self powered
 +uhub0: 5 ports with 5 removable, self powered
 +uhub2: 5 ports with 5 removable, self powered
 +uhub5: 4 ports with 4 removable, self powered
 +uhub6: 4 ports with 4 removable, self powered
 +uhub1: 5 ports with 5 removable, self powered
 +uhub3: 5 ports with 5 removable, self powered
 +ugen6.2: <​Generic>​ at usbus6
 +umass0: <Generic Flash Card ReaderWriter,​ class 0/0, rev 2.01/1.00, addr 2> on usbus6
 +umass0: ​ SCSI over Bulk-Only; quirks = 0x4001
 +umass0:6:0: Attached to scbus6
 +ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
 +ada0: <​SuperSSpeed S238 16GB V4629> ATA-7 SATA 2.x device
 +ada0: Serial Number YTAK13450504
 +ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
 +ada0: Command Queueing enabled
 +ada0: 15258MB (31248704 512 byte sectors: 16H 63S/T 16383C)
 +ada0: Previously was known as ad4
 +da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
 +da0: <​Multiple Card  Reader 1.00> Removable Direct Access SCSI-4 device
 +da0: Serial Number 058F63666485
 +da0: 40.000MB/s transfers
 +da0: Attempt to query device size failed: NOT READY, Medium not present
 +da0: quirks=0x2<​NO_6_BYTE>​
 +SMP: AP CPU #1 Launched!
 +Timecounter "​TSC"​ frequency 1000021999 Hz quality 800
 +amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
 +</​code>​
 +
 +===== pciconf =====
 +
 +<​code>​
 +hostb0@pci0:​0:​0:​0: ​     class=0x060000 card=0x15101022 chip=0x15101022 rev=0x00 hdr=0x00
 +    vendor ​    = '​Advanced Micro Devices [AMD]'
 +    device ​    = '​Family 14h Processor Root Complex'​
 +    class      = bridge
 +    subclass ​  = HOST-PCI
 +pcib1@pci0:​0:​4:​0: ​      ​class=0x060400 card=0x12341022 chip=0x15121022 rev=0x00 hdr=0x01
 +    vendor ​    = '​Advanced Micro Devices [AMD]'
 +    device ​    = '​Family 14h Processor Root Port'
 +    class      = bridge
 +    subclass ​  = PCI-PCI
 +    cap 01[50] = powerspec 3  supports D0 D3  current D0
 +    cap 10[58] = PCI-Express 2 root port slot max data 128(128) link x1(x1)
 +                 speed 2.5(5.0) ASPM L0s/​L1(L0s/​L1)
 +    cap 05[a0] = MSI supports 1 message, 64 bit
 +    cap 0d[b0] = PCI Bridge card=0x12341022
 +    cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
 +pcib2@pci0:​0:​5:​0: ​      ​class=0x060400 card=0x12341022 chip=0x15131022 rev=0x00 hdr=0x01
 +    vendor ​    = '​Advanced Micro Devices [AMD]'
 +    device ​    = '​Family 14h Processor Root Port'
 +    class      = bridge
 +    subclass ​  = PCI-PCI
 +    cap 01[50] = powerspec 3  supports D0 D3  current D0
 +    cap 10[58] = PCI-Express 2 root port slot max data 128(128) link x1(x1)
 +                 speed 2.5(5.0) ASPM L0s/​L1(L0s/​L1)
 +    cap 05[a0] = MSI supports 1 message, 64 bit
 +    cap 0d[b0] = PCI Bridge card=0x12341022
 +    cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
 +pcib3@pci0:​0:​6:​0: ​      ​class=0x060400 card=0x12341022 chip=0x15141022 rev=0x00 hdr=0x01
 +    vendor ​    = '​Advanced Micro Devices [AMD]'
 +    device ​    = '​Family 14h Processor Root Port'
 +    class      = bridge
 +    subclass ​  = PCI-PCI
 +    cap 01[50] = powerspec 3  supports D0 D3  current D0
 +    cap 10[58] = PCI-Express 2 root port slot max data 128(128) link x1(x1)
 +                 speed 2.5(5.0) ASPM L0s/​L1(L0s/​L1)
 +    cap 05[a0] = MSI supports 1 message, 64 bit
 +    cap 0d[b0] = PCI Bridge card=0x12341022
 +    cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
 +pcib4@pci0:​0:​7:​0: ​      ​class=0x060400 card=0x12341022 chip=0x15151022 rev=0x00 hdr=0x01
 +    vendor ​    = '​Advanced Micro Devices [AMD]'
 +    device ​    = '​Family 14h Processor Root Port'
 +    class      = bridge
 +    subclass ​  = PCI-PCI
 +    cap 01[50] = powerspec 3  supports D0 D3  current D0
 +    cap 10[58] = PCI-Express 2 root port slot max data 128(128) link x1(x1)
 +                 speed 2.5(5.0) ASPM L1(L0s/L1)
 +    cap 05[a0] = MSI supports 1 message, 64 bit
 +    cap 0d[b0] = PCI Bridge card=0x12341022
 +    cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
 +ahci0@pci0:​0:​17:​0: ​     class=0x010601 card=0x43911002 chip=0x43911002 rev=0x40 hdr=0x00
 +    vendor ​    = '​Advanced Micro Devices [AMD] nee ATI'
 +    device ​    = '​SB7x0/​SB8x0/​SB9x0 SATA Controller [AHCI mode]'
 +    class      = mass storage
 +    subclass ​  = SATA
 +    bar   [10] = type I/O Port, range 32, base 0x4020, size 8, enabled
 +    bar   [14] = type I/O Port, range 32, base 0x4040, size 4, enabled
 +    bar   [18] = type I/O Port, range 32, base 0x4028, size 8, enabled
 +    bar   [1c] = type I/O Port, range 32, base 0x4044, size 4, enabled
 +    bar   [20] = type I/O Port, range 32, base 0x4000, size 16, enabled
 +    bar   [24] = type Memory, range 32, base 0xfeb08000, size 1024, enabled
 +    cap 12[70] = SATA Index-Data Pair
 +    cap 13[a4] = PCI Advanced Features: FLR TP
 +ohci0@pci0:​0:​18:​0: ​     class=0x0c0310 card=0x43971002 chip=0x43971002 rev=0x00 hdr=0x00
 +    vendor ​    = '​Advanced Micro Devices [AMD] nee ATI'
 +    device ​    = '​SB7x0/​SB8x0/​SB9x0 USB OHCI0 Controller'​
 +    class      = serial bus
 +    subclass ​  = USB
 +    bar   [10] = type Memory, range 32, base 0xfeb04000, size 4096, enabled
 +ehci0@pci0:​0:​18:​2: ​     class=0x0c0320 card=0x43961002 chip=0x43961002 rev=0x00 hdr=0x00
 +    vendor ​    = '​Advanced Micro Devices [AMD] nee ATI'
 +    device ​    = '​SB7x0/​SB8x0/​SB9x0 USB EHCI Controller'​
 +    class      = serial bus
 +    subclass ​  = USB
 +    bar   [10] = type Memory, range 32, base 0xfeb08400, size 256, enabled
 +    cap 01[c0] = powerspec 2  supports D0 D1 D2 D3  current D0
 +    cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14
 +ohci1@pci0:​0:​19:​0: ​     class=0x0c0310 card=0x43971002 chip=0x43971002 rev=0x00 hdr=0x00
 +    vendor ​    = '​Advanced Micro Devices [AMD] nee ATI'
 +    device ​    = '​SB7x0/​SB8x0/​SB9x0 USB OHCI0 Controller'​
 +    class      = serial bus
 +    subclass ​  = USB
 +    bar   [10] = type Memory, range 32, base 0xfeb05000, size 4096, enabled
 +ehci1@pci0:​0:​19:​2: ​     class=0x0c0320 card=0x43961002 chip=0x43961002 rev=0x00 hdr=0x00
 +    vendor ​    = '​Advanced Micro Devices [AMD] nee ATI'
 +    device ​    = '​SB7x0/​SB8x0/​SB9x0 USB EHCI Controller'​
 +    class      = serial bus
 +    subclass ​  = USB
 +    bar   [10] = type Memory, range 32, base 0xfeb08500, size 256, enabled
 +    cap 01[c0] = powerspec 2  supports D0 D1 D2 D3  current D0
 +    cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14
 +none0@pci0:​0:​20:​0: ​     class=0x0c0500 card=0x15101022 chip=0x43851002 rev=0x42 hdr=0x00
 +    vendor ​    = '​Advanced Micro Devices [AMD] nee ATI'
 +    device ​    = 'SBx00 SMBus Controller'​
 +    class      = serial bus
 +    subclass ​  = SMBus
 +atapci0@pci0:​0:​20:​1: ​   class=0x01018a card=0x439c1002 chip=0x439c1002 rev=0x40 hdr=0x00
 +    vendor ​    = '​Advanced Micro Devices [AMD] nee ATI'
 +    device ​    = '​SB7x0/​SB8x0/​SB9x0 IDE Controller'​
 +    class      = mass storage
 +    subclass ​  = ATA
 +    bar   [20] = type I/O Port, range 32, base 0x4010, size 16, enabled
 +isab0@pci0:​0:​20:​3: ​     class=0x060100 card=0x439d1002 chip=0x439d1002 rev=0x40 hdr=0x00
 +    vendor ​    = '​Advanced Micro Devices [AMD] nee ATI'
 +    device ​    = '​SB7x0/​SB8x0/​SB9x0 LPC host controller'​
 +    class      = bridge
 +    subclass ​  = PCI-ISA
 +pcib5@pci0:​0:​20:​4: ​     class=0x060401 card=0x00000000 chip=0x43841002 rev=0x40 hdr=0x01
 +    vendor ​    = '​Advanced Micro Devices [AMD] nee ATI'
 +    device ​    = 'SBx00 PCI to PCI Bridge'​
 +    class      = bridge
 +    subclass ​  = PCI-PCI
 +ohci2@pci0:​0:​20:​5: ​     class=0x0c0310 card=0x43991002 chip=0x43991002 rev=0x00 hdr=0x00
 +    vendor ​    = '​Advanced Micro Devices [AMD] nee ATI'
 +    device ​    = '​SB7x0/​SB8x0/​SB9x0 USB OHCI2 Controller'​
 +    class      = serial bus
 +    subclass ​  = USB
 +    bar   [10] = type Memory, range 32, base 0xfeb06000, size 4096, enabled
 +pcib6@pci0:​0:​21:​0: ​     class=0x060400 card=0x00001002 chip=0x43a01002 rev=0x00 hdr=0x01
 +    vendor ​    = '​Advanced Micro Devices [AMD] nee ATI'
 +    device ​    = '​SB700/​SB800/​SB900 PCI to PCI bridge (PCIE port 0)'
 +    class      = bridge
 +    subclass ​  = PCI-PCI
 +    cap 01[50] = powerspec 3  supports D0 D1 D2 D3  current D0
 +    cap 10[58] = PCI-Express 2 root port max data 128(128) link x16(x4)
 +                 speed undef(2.5) ASPM disabled(L0s/​L1)
 +    cap 05[a0] = MSI supports 1 message, 64 bit
 +    cap 0d[b0] = PCI Bridge card=0x00001002
 +    cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
 +ohci3@pci0:​0:​22:​0: ​     class=0x0c0310 card=0x43971002 chip=0x43971002 rev=0x00 hdr=0x00
 +    vendor ​    = '​Advanced Micro Devices [AMD] nee ATI'
 +    device ​    = '​SB7x0/​SB8x0/​SB9x0 USB OHCI0 Controller'​
 +    class      = serial bus
 +    subclass ​  = USB
 +    bar   [10] = type Memory, range 32, base 0xfeb07000, size 4096, enabled
 +ehci2@pci0:​0:​22:​2: ​     class=0x0c0320 card=0x43961002 chip=0x43961002 rev=0x00 hdr=0x00
 +    vendor ​    = '​Advanced Micro Devices [AMD] nee ATI'
 +    device ​    = '​SB7x0/​SB8x0/​SB9x0 USB EHCI Controller'​
 +    class      = serial bus
 +    subclass ​  = USB
 +    bar   [10] = type Memory, range 32, base 0xfeb08600, size 256, enabled
 +    cap 01[c0] = powerspec 2  supports D0 D1 D2 D3  current D0
 +    cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14
 +hostb1@pci0:​0:​24:​0: ​    ​class=0x060000 card=0x00000000 chip=0x17001022 rev=0x43 hdr=0x00
 +    vendor ​    = '​Advanced Micro Devices [AMD]'
 +    device ​    = '​Family 12h/14h Processor Function 0'
 +    class      = bridge
 +    subclass ​  = HOST-PCI
 +hostb2@pci0:​0:​24:​1: ​    ​class=0x060000 card=0x00000000 chip=0x17011022 rev=0x00 hdr=0x00
 +    vendor ​    = '​Advanced Micro Devices [AMD]'
 +    device ​    = '​Family 12h/14h Processor Function 1'
 +    class      = bridge
 +    subclass ​  = HOST-PCI
 +hostb3@pci0:​0:​24:​2: ​    ​class=0x060000 card=0x00000000 chip=0x17021022 rev=0x00 hdr=0x00
 +    vendor ​    = '​Advanced Micro Devices [AMD]'
 +    device ​    = '​Family 12h/14h Processor Function 2'
 +    class      = bridge
 +    subclass ​  = HOST-PCI
 +hostb4@pci0:​0:​24:​3: ​    ​class=0x060000 card=0x00000000 chip=0x17031022 rev=0x00 hdr=0x00
 +    vendor ​    = '​Advanced Micro Devices [AMD]'
 +    device ​    = '​Family 12h/14h Processor Function 3'
 +    class      = bridge
 +    subclass ​  = HOST-PCI
 +    cap 0f[f0] = unknown
 +hostb5@pci0:​0:​24:​4: ​    ​class=0x060000 card=0x00000000 chip=0x17041022 rev=0x00 hdr=0x00
 +    vendor ​    = '​Advanced Micro Devices [AMD]'
 +    device ​    = '​Family 12h/14h Processor Function 4'
 +    class      = bridge
 +    subclass ​  = HOST-PCI
 +hostb6@pci0:​0:​24:​5: ​    ​class=0x060000 card=0x00000000 chip=0x17181022 rev=0x00 hdr=0x00
 +    vendor ​    = '​Advanced Micro Devices [AMD]'
 +    device ​    = '​Family 12h/14h Processor Function 6'
 +    class      = bridge
 +    subclass ​  = HOST-PCI
 +hostb7@pci0:​0:​24:​6: ​    ​class=0x060000 card=0x00000000 chip=0x17161022 rev=0x00 hdr=0x00
 +    vendor ​    = '​Advanced Micro Devices [AMD]'
 +    device ​    = '​Family 12h/14h Processor Function 5'
 +    class      = bridge
 +    subclass ​  = HOST-PCI
 +hostb8@pci0:​0:​24:​7: ​    ​class=0x060000 card=0x00000000 chip=0x17191022 rev=0x00 hdr=0x00
 +    vendor ​    = '​Advanced Micro Devices [AMD]'
 +    device ​    = '​Family 12h/14h Processor Function 7'
 +    class      = bridge
 +    subclass ​  = HOST-PCI
 +re0@pci0:​1:​0:​0:​ class=0x020000 card=0x012310ec chip=0x816810ec rev=0x06 hdr=0x00
 +    vendor ​    = '​Realtek Semiconductor Co., Ltd.'
 +    device ​    = '​RTL8111/​8168B PCI Express Gigabit Ethernet controller'​
 +    class      = network
 +    subclass ​  = ethernet
 +    bar   [10] = type I/O Port, range 32, base 0x1000, size 256, enabled
 +    bar   [18] = type Memory, range 64, base 0xfe500000, size 4096, enabled
 +    bar   [20] = type Prefetchable Memory, range 64, base 0xfe400000, size 16384, enabled
 +    cap 01[40] = powerspec 3  supports D0 D1 D2 D3  current D0
 +    cap 05[50] = MSI supports 1 message, 64 bit
 +    cap 10[70] = PCI-Express 2 endpoint IRQ 1 max data 128(128) link x1(x1)
 +                 speed 2.5(2.5) ASPM disabled(L0s/​L1)
 +    cap 11[b0] = MSI-X supports 4 messages, enabled
 +                 Table in map 0x20[0x0], PBA in map 0x20[0x800]
 +    cap 03[d0] = VPD
 +re1@pci0:​2:​0:​0:​ class=0x020000 card=0x012310ec chip=0x816810ec rev=0x06 hdr=0x00
 +    vendor ​    = '​Realtek Semiconductor Co., Ltd.'
 +    device ​    = '​RTL8111/​8168B PCI Express Gigabit Ethernet controller'​
 +    class      = network
 +    subclass ​  = ethernet
 +    bar   [10] = type I/O Port, range 32, base 0x2000, size 256, enabled
 +    bar   [18] = type Memory, range 64, base 0xfe700000, size 4096, enabled
 +    bar   [20] = type Prefetchable Memory, range 64, base 0xfe600000, size 16384, enabled
 +    cap 01[40] = powerspec 3  supports D0 D1 D2 D3  current D0
 +    cap 05[50] = MSI supports 1 message, 64 bit
 +    cap 10[70] = PCI-Express 2 endpoint IRQ 1 max data 128(128) link x1(x1)
 +                 speed 2.5(2.5) ASPM disabled(L0s/​L1)
 +    cap 11[b0] = MSI-X supports 4 messages, enabled
 +                 Table in map 0x20[0x0], PBA in map 0x20[0x800]
 +    cap 03[d0] = VPD
 +re2@pci0:​3:​0:​0:​ class=0x020000 card=0x012310ec chip=0x816810ec rev=0x06 hdr=0x00
 +    vendor ​    = '​Realtek Semiconductor Co., Ltd.'
 +    device ​    = '​RTL8111/​8168B PCI Express Gigabit Ethernet controller'​
 +    class      = network
 +    subclass ​  = ethernet
 +    bar   [10] = type I/O Port, range 32, base 0x3000, size 256, enabled
 +    bar   [18] = type Memory, range 64, base 0xfe900000, size 4096, enabled
 +    bar   [20] = type Prefetchable Memory, range 64, base 0xfe800000, size 16384, enabled
 +    cap 01[40] = powerspec 3  supports D0 D1 D2 D3  current D0
 +    cap 05[50] = MSI supports 1 message, 64 bit
 +    cap 10[70] = PCI-Express 2 endpoint IRQ 1 max data 128(128) link x1(x1)
 +                 speed 2.5(2.5) ASPM disabled(L0s/​L1)
 +    cap 11[b0] = MSI-X supports 4 messages, enabled
 +                 Table in map 0x20[0x0], PBA in map 0x20[0x800]
 +    cap 03[d0] = VPD
 +ath0@pci0:​4:​0:​0: ​       class=0x028000 card=0x3099168c chip=0x002a168c rev=0x01 hdr=0x00
 +    vendor ​    = '​Atheros Communications Inc.'
 +    device ​    = '​AR928X Wireless Network Adapter (PCI-Express)'​
 +    class      = network
 +    bar   [10] = type Memory, range 64, base 0xfea00000, size 65536, enabled
 +    cap 01[40] = powerspec 2  supports D0 D1 D3  current D0
 +    cap 05[50] = MSI supports 1 message
 +    cap 10[60] = PCI-Express 1 legacy endpoint max data 128(128) link x1(x1)
 +                 speed 2.5(2.5) ASPM L1(L1)
 +    cap 11[90] = MSI-X supports 1 message
 +                 Table in map 0x10[0x0], PBA in map 0x10[0x0]
 +</​code>​
documentation/examples/pc_engines_apu.txt ยท Last modified: 2014/03/14 14:45 (external edit)