BSD Router Project

User Tools

Site Tools

Trace:
documentation:examples:simple_bgp-rip-ospf_lab

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
documentation:examples:simple_bgp-rip-ospf_lab [2019/08/10 14:15] – [Router 5] olivierdocumentation:examples:simple_bgp-rip-ospf_lab [2023/05/01 07:03] (current) – [Final testing] olivier
Line 20: Line 20:
 More information on these BSDRP lab scripts available on [[documentation:examples:How to build a BSDRP router lab]]. More information on these BSDRP lab scripts available on [[documentation:examples:How to build a BSDRP router lab]].
  
-Start the lab with 5 routers, here is an example with VirtualBox: 
  
-<code>./BSDRP-lab-vbox.sh -i BSDRP-1.91-full-amd64-serial.img.xz -n 7</code> 
  
 ===== Routers configuration ===== ===== Routers configuration =====
 +=== VM mode: 7 VMs ===
  
 All these routers can be configured with labconfig tool (use it only on a lab, because it will replace your current running configuration): All these routers can be configured with labconfig tool (use it only on a lab, because it will replace your current running configuration):
 +
 +Start the lab with 7 routers, here is an example with VirtualBox:
 +
 +<code>./BSDRP-lab-vbox.sh -i BSDRP-1.97-full-amd64-serial.img.xz -n 7</code>
 +
 +Then on each:
 <code> <code>
 labconfig frr_vm[VM-NUMBER] labconfig frr_vm[VM-NUMBER]
 +</code>
 +
 +=== Jail mode: 1 VM running 7 jails ===
 +
 +
 +Or just using one router:
 +<code>./BSDRP-lab-vbox.sh -i BSDRP-1.97-full-amd64-serial.img.xz -n 1</code>
 +
 +
 +Then you can use the jail/vnet version with command:
 +<code>
 +labconfig frr_jails
 </code> </code>
 ==== Router 1 ==== ==== Router 1 ====
  
 <code> <code>
-sysrc hostname=router1 +sysrc hostname=router1 \ 
-sysrc cloned_interfaces=lo1 +  cloned_interfaces=lo1 \ 
-sysrc ipsec_enable=YES +  ipsec_enable=YES \ 
-sysrc ipsec_file="/etc/ipsec.conf" +  ipsec_file="/etc/ipsec.conf" \ 
-sysrc frr_enable=yes+  frr_vtysh_boot=YES \ 
 +  frr_enable=yes
 cat <<EOF > /etc/ipsec.conf cat <<EOF > /etc/ipsec.conf
 flush ; flush ;
Line 48: Line 66:
 cat > /usr/local/etc/frr/frr.conf <<EOF cat > /usr/local/etc/frr/frr.conf <<EOF
 log syslog log syslog
-! 
-interface em0 
- ip address 192.168.12.1/24 
- ipv6 address 2001:db8:12::1/64 
 ! !
 interface lo1 interface lo1
Line 84: Line 98:
 bfd bfd
  peer 2001:db8:12::2 local-address 2001:db8:12::1  peer 2001:db8:12::2 local-address 2001:db8:12::1
-  label router2-6 
   no shutdown   no shutdown
  !  !
  peer 192.168.12.2  peer 192.168.12.2
-  label router2-4 
   no shutdown   no shutdown
  !  !
Line 121: Line 133:
  key 1  key 1
   key-string rippassword   key-string rippassword
-! 
-interface em0 
- ip address 192.168.12.2/24 
- ipv6 address 2001:db8:12::2/64 
-! 
-interface em1 
- ip address 192.168.23.2/24 
- ip rip authentication key-chain rippass 
- ip rip authentication mode md5 
- ipv6 address 2001:db8:23::2/64 
 ! !
 interface vtnet0 interface vtnet0
Line 143: Line 145:
 ! !
 router rip router rip
- network em1 
  network vtnet1  network vtnet1
  redistribute bgp  redistribute bgp
Line 150: Line 151:
 ! !
 router ripng router ripng
- network em1 
  network vtnet1  network vtnet1
  redistribute bgp  redistribute bgp
Line 181: Line 181:
 bfd bfd
  peer 192.168.12.1  peer 192.168.12.1
-  label router1-4 
   no shutdown   no shutdown
  !  !
  peer 2001:db8:12::1 local-address 2001:db8:12::2  peer 2001:db8:12::1 local-address 2001:db8:12::2
-  label router1-6 
   no shutdown   no shutdown
  !  !
Line 209: Line 207:
  key 1  key 1
   key-string rippassword   key-string rippassword
-! 
-interface em1 
- ip address 192.168.23.3/24 
- ip rip authentication key-chain rippass 
- ip rip authentication mode md5 
- ipv6 address 2001:db8:23::3/64 
-! 
-interface em2 
- ip address 192.168.34.3/24 
- ip ospf bfd 
- ip ospf message-digest-key 1 md5 superpass 
- ipv6 address 2001:db8:34::3/64 
- ipv6 ospf6 bfd 
 ! !
 interface vtnet1 interface vtnet1
Line 237: Line 222:
 ! !
 router rip router rip
- network em1 
  network vtnet1  network vtnet1
  redistribute connected  redistribute connected
Line 244: Line 228:
 ! !
 router ripng router ripng
- network em1 
  network vtnet1  network vtnet1
  redistribute connected  redistribute connected
Line 260: Line 243:
  redistribute ripng  redistribute ripng
  interface vtnet2 area 0.0.0.0  interface vtnet2 area 0.0.0.0
- interface em2 area 0.0.0.0 
 ! !
 bfd bfd
  peer 2001:db8:34::4 local-address 2001:db8:34::3  peer 2001:db8:34::4 local-address 2001:db8:34::3
-  label router4-6 
   no shutdown   no shutdown
  !  !
  peer 192.168.34.4  peer 192.168.34.4
-  label router4-4 
   no shutdown   no shutdown
  !  !
 ! !
 EOF EOF
 +
 hostname router3 hostname router3
 service frr start service frr start
Line 284: Line 265:
 cat > /usr/local/etc/frr/frr.conf <<EOF cat > /usr/local/etc/frr/frr.conf <<EOF
 log syslog log syslog
-! 
-interface em2 
- ip address 192.168.34.4/24 
- ip ospf bfd 
- ip ospf message-digest-key 1 md5 superpass 
- ipv6 address 2001:db8:34::4/64 
- ipv6 ospf6 bfd 
-! 
-interface em3 
- ip address 192.168.45.4/24 
- ip router isis BSDRP 
- ipv6 address 2001:db8:45::4/64 
- ipv6 router isis BSDRP 
- isis circuit-type level-2-only 
 ! !
 interface vtnet2 interface vtnet2
Line 323: Line 290:
  redistribute connected  redistribute connected
  redistribute isis  redistribute isis
- interface em2 area 0.0.0.0 
  interface vtnet2 area 0.0.0.0  interface vtnet2 area 0.0.0.0
 ! !
Line 336: Line 302:
 bfd bfd
  peer 2001:db8:34::3 local-address 2001:db8:34::4  peer 2001:db8:34::3 local-address 2001:db8:34::4
-  label router3-6 
   no shutdown   no shutdown
  !  !
  peer 192.168.34.3  peer 192.168.34.3
-  label router3-4 
   no shutdown   no shutdown
  !  !
Line 358: Line 322:
 cat > /usr/local/etc/frr/frr.conf <<EOF cat > /usr/local/etc/frr/frr.conf <<EOF
 log syslog log syslog
-! 
-interface em3 
- ip address 192.168.45.5/24 
- ip router isis BSDRP 
- ipv6 address 2001:db8:45::5/64 
- ipv6 router isis BSDRP 
- isis circuit-type level-2-only 
-! 
-interface em4 
- ip address 192.168.56.5/24 
- ip router isis BSDRP 
- ipv6 address 2001:db8:56::5/64 
- ipv6 router isis BSDRP 
- isis circuit-type level-2-only 
- isis passive 
 ! !
 interface vtnet3 interface vtnet3
Line 390: Line 339:
 ! !
 router babel router babel
- network em3 
  network vtnet3  network vtnet3
- network em4 
  network vtnet4  network vtnet4
  redistribute ipv4 isis  redistribute ipv4 isis
Line 415: Line 362:
 sysrc hostname=router6 sysrc hostname=router6
 sysrc frr_enable=YES sysrc frr_enable=YES
-cat > /usr/local/etc/frr/zebra.conf <<EOF+cat > /usr/local/etc/frr/frr.conf <<EOF
 log syslog log syslog
-interface em4 +! 
- ip address 192.168.56.6/24 +ip route 192.168.70.0/24 192.168.67.7 
- ipv6 address 2001:db8:56::6/64+ipv6 route 2001:db8:70::/64 2001:db8:67::7 
 +!
 interface vtnet4 interface vtnet4
  ip address 192.168.56.6/24  ip address 192.168.56.6/24
  ipv6 address 2001:db8:56::6/64  ipv6 address 2001:db8:56::6/64
-interface em5 +!
- ip address 192.168.67.6/24 +
- ipv6 address 2001:db8:67::6/64+
 interface vtnet5 interface vtnet5
  ip address 192.168.67.6/24  ip address 192.168.67.6/24
  ipv6 address 2001:db8:67::6/64  ipv6 address 2001:db8:67::6/64
-EOF +!
-cat > /usr/local/etc/frr/babeld.conf <<EOF+
 router babel router babel
- network em4 
  network vtnet4  network vtnet4
  redistribute ipv4 connected  redistribute ipv4 connected
Line 438: Line 382:
  redistribute ipv6 connected  redistribute ipv6 connected
  redistribute ipv6 static  redistribute ipv6 static
-EOF +!
-cat > /usr/local/etc/frr/staticd.conf <<EOF +
-ip route 192.168.70.0/24 192.168.67.7 +
-ipv6 route 2001:db8:70::/64 2001:db8:67::7+
 EOF EOF
 hostname router6 hostname router6
 service netif restart service netif restart
 service frr start service frr start
 +config save
 </code> </code>
  
Line 454: Line 396:
 sysrc cloned_interfaces=lo1 sysrc cloned_interfaces=lo1
 sysrc frr_enable=YES sysrc frr_enable=YES
-cat > /usr/local/etc/frr/zebra.conf <<EOF+cat > /usr/local/etc/frr/frr.conf <<EOF
 log syslog log syslog
-interface em5 +! 
- ip address 192.168.67.7/24 +ip route 0.0.0.0/0 192.168.67.6 
- ipv6 address 2001:db8:57::7/64 +ipv6 route ::/0 2001:db8:67::6 
-interface vtnet5 +!
- ip address 192.168.67.7/24 +
- ipv6 address 2001:db8:67::7/64+
 interface lo1 interface lo1
  ip address 192.168.70.7/24  ip address 192.168.70.7/24
  ipv6 address 2001:db8:70::7/64  ipv6 address 2001:db8:70::7/64
-EOF +! 
-cat > /usr/local/etc/frr/staticd.conf <<EOF +interface vtnet5 
-ip route 0.0.0.0/0 192.168.67.6 + ip address 192.168.67.7/24 
-ipv6 route ::/0 2001:db8:67::6+ ipv6 address 2001:db8:67::7/64 
 +!
 EOF EOF
 hostname router7 hostname router7
 service netif restart service netif restart
 service frr start service frr start
 +config save
 </code> </code>
 ===== Final testing ===== ===== Final testing =====
Line 490: Line 432:
 round-trip min/avg/max/stddev = 0.541/0.555/0.580/0.016 ms round-trip min/avg/max/stddev = 0.541/0.555/0.580/0.016 ms
  
-[root@router1]~# ping6 -c 4 -S 2001:db8:10::1 2001:db8:70::7+[root@router1]~# ping -c 4 -S 2001:db8:10::1 2001:db8:70::7
 PING6(56=40+8+8 bytes) 2001:db8:10::1 --> 2001:db8:70::7 PING6(56=40+8+8 bytes) 2001:db8:10::1 --> 2001:db8:70::7
 16 bytes from 2001:db8:70::7, icmp_seq=0 hlim=59 time=0.607 ms 16 bytes from 2001:db8:70::7, icmp_seq=0 hlim=59 time=0.607 ms
documentation/examples/simple_bgp-rip-ospf_lab.1565439310.txt.gz · Last modified: 2019/08/10 14:15 by olivier
Except where otherwise noted, content on this wiki is licensed under the following license: BSD 2-Clause
Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki