Differences

This shows you the differences between two versions of the page.

--- documentation:examples:simple_bgp-rip-ospf_lab [2020/11/10 22:42] – [Download Lab scripts] olivier
+++ documentation:examples:simple_bgp-rip-ospf_lab [2023/05/01 07:03] (current) – [Final testing] olivier
@@ Line 23: / Line 23: @@
 ===== Routers configuration =====
+=== VM mode: 7 VMs ===
 All these routers can be configured with labconfig tool (use it only on a lab, because it will replace your current running configuration):
+Start the lab with 7 routers, here is an example with VirtualBox:
+<code>./BSDRP-lab-vbox.sh -i BSDRP-1.97-full-amd64-serial.img.xz -n 7</code>
+Then on each:
 <code>
 labconfig frr_vm[VM-NUMBER]
 </code>
-Or just using one router, you can use the jail/vnet version with command:
+=== Jail mode: 1 VM running 7 jails ===
+Or just using one router:
+<code>./BSDRP-lab-vbox.sh -i BSDRP-1.97-full-amd64-serial.img.xz -n 1</code>
+Then you can use the jail/vnet version with command:
 <code>
 labconfig frr_jails
@@ Line 36: / Line 50: @@
 <code>
-sysrc hostname=router1
+sysrc hostname=router1 \
-sysrc cloned_interfaces=lo1
+  cloned_interfaces=lo1 \
-sysrc ipsec_enable=YES
+  ipsec_enable=YES \
-sysrc ipsec_file="/etc/ipsec.conf"
+  ipsec_file="/etc/ipsec.conf" \
-sysrc frr_enable=yes
+  frr_vtysh_boot=YES \
+  frr_enable=yes
 cat <<EOF > /etc/ipsec.conf
 flush ;
@@ Line 417: / Line 432: @@
 round-trip min/avg/max/stddev = 0.541/0.555/0.580/0.016 ms
-[root@router1]~# ping6 -c 4 -S 2001:db8:10::1 2001:db8:70::7
+[root@router1]~# ping -c 4 -S 2001:db8:10::1 2001:db8:70::7
 PING6(56=40+8+8 bytes) 2001:db8:10::1 --> 2001:db8:70::7
 bytes from 2001:db8:70::7, icmp_seq=0 hlim=59 time=0.607 ms