User Tools

Site Tools


documentation:examples:validating_openvpn_s_low-latency_servers_selection_patch

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

documentation:examples:validating_openvpn_s_low-latency_servers_selection_patch [2017/07/07 00:26] (current)
Line 1: Line 1:
 +====== Validating OpenVPN'​s low latency servers selection patch ======
 +
 +This lab test a [[https://​github.com/​paulgarnier/​openvpn/​commit/​259d94029595c80076eef2282fd24d1961cf7d2d|cool OpenVPN'​s patch: lowest-latency-server]]. This mean when multiple remote servers are configured, we measure their latency and connect in priority to the lowest latency. ​
 +
 +===== Presentation =====
 +
 +==== Network diagram ====
 +
 +Lab build following [[documentation:​examples:​How to build a BSDRP router lab]]: 5 routers with full-meshed link.
 +
 +Here is the logical and physical view:
 +
 +{{:​documentation:​examples:​bsdrp.lab.openvpn-low-latency-servers-selection.png}}
 +===== Base routers configuration =====
 +
 +We start a 5 routers full-mesh lab with one shared LAN:
 +<​code>​
 +root@lab:~ # /​tools/​BSDRP-lab-bhyve.sh -i BSDRP-1.591-full-amd64-vga.img.xz -n 5 -l 1
 +vmm module not loaded. Loading it...
 +if_tap module not loaded. Loading it...
 +BSD Router Project (http://​bsdrp.net) - bhyve full-meshed lab script
 +Setting-up a virtual lab with 5 VM(s):
 +- Working directory: /tmp/BSDRP
 +- Each VM have 1 core(s) and 256M RAM
 +- Switch mode: bridge + tap
 +- 1 LAN(s) between all VM
 +- Full mesh Ethernet links between each VM
 +VM 1 have the following NIC:
 +- vtnet0 connected to VM 2.
 +- vtnet1 connected to VM 3.
 +- vtnet2 connected to VM 4.
 +- vtnet3 connected to VM 5.
 +- vtnet4 connected to LAN number 1
 +VM 2 have the following NIC:
 +- vtnet0 connected to VM 1.
 +- vtnet1 connected to VM 3.
 +- vtnet2 connected to VM 4.
 +- vtnet3 connected to VM 5.
 +- vtnet4 connected to LAN number 1
 +VM 3 have the following NIC:
 +- vtnet0 connected to VM 1.
 +- vtnet1 connected to VM 2.
 +- vtnet2 connected to VM 4.
 +- vtnet3 connected to VM 5.
 +- vtnet4 connected to LAN number 1
 +VM 4 have the following NIC:
 +- vtnet0 connected to VM 1.
 +- vtnet1 connected to VM 2.
 +- vtnet2 connected to VM 3.
 +- vtnet3 connected to VM 5.
 +- vtnet4 connected to LAN number 1
 +VM 5 have the following NIC:
 +- vtnet0 connected to VM 1.
 +- vtnet1 connected to VM 2.
 +- vtnet2 connected to VM 3.
 +- vtnet3 connected to VM 4.
 +- vtnet4 connected to LAN number 1
 +For connecting to VM'​serial console, you can use:
 +- VM 1 : cu -l /dev/nmdm1B
 +- VM 2 : cu -l /dev/nmdm2B
 +- VM 3 : cu -l /dev/nmdm3B
 +- VM 4 : cu -l /dev/nmdm4B
 +- VM 5 : cu -l /dev/nmdm5B
 +</​code>​
 +
 +==== Router 1 ====
 +
 +<​code>​
 +sysrc hostname=R1
 +sysrc ifconfig_em0="​inet 10.0.1.1/​24"​
 +sysrc ifconfig_em0_ipv6="​inet6 2001:​db8:​1::​1 prefixlen 64"
 +sysrc ifconfig_em3="​inet 192.168.15.1/​24"​
 +sysrc ifconfig_em3_ipv6="​inet6 2001:​db8:​15::​1 prefixlen 64"
 +sysrc defaultrouter=192.168.15.5
 +sysrc ipv6_defaultrouter=2001:​db8:​15::​5
 +ifconfig -l | grep -q vtnet && sed -i ""​ '​s/​em/​vtnet/​g'​ /​etc/​rc.conf
 +service netif restart
 +service routing restart
 +config save
 +</​code>​
 +==== Router 2 ====
 +
 +<​code>​
 +sysrc hostname=R2
 +sysrc ifconfig_em4="​inet 10.0.2.2/​24"​
 +sysrc ifconfig_em4_ipv6="​inet6 2001:​db8:​2::​2 prefixlen 64"
 +sysrc ifconfig_em3="​inet 192.168.25.2/​24"​
 +sysrc ifconfig_em3_ipv6="​inet6 2001:​db8:​25::​2 prefixlen 64"
 +sysrc defaultrouter="​192.168.25.5"​
 +sysrc ipv6_defaultrouter="​2001:​db8:​25::​5"​
 +ifconfig -l | grep -q vtnet && sed -i ""​ '​s/​em/​vtnet/​g'​ /​etc/​rc.conf
 +service netif restart
 +service routing restart
 +config save
 +</​code>​
 +
 +==== Router 3 ====
 +
 +<​code>​
 +sysrc hostname=R3
 +sysrc ifconfig_em4="​inet 10.0.2.3/​24"​
 +sysrc ifconfig_em4_ipv6="​inet6 2001:​db8:​2::​3 prefixlen 64"
 +sysrc ifconfig_em3="​inet 192.168.35.3/​24"​
 +sysrc ifconfig_em3_ipv6="​inet6 2001:​db8:​35::​3 prefixlen 64"
 +sysrc defaultrouter="​192.168.35.5"​
 +sysrc ipv6_defaultrouter="​2001:​db8:​35::​5"​
 +ifconfig -l | grep -q vtnet && sed -i ""​ '​s/​em/​vtnet/​g'​ /​etc/​rc.conf
 +service netif restart
 +service routing restart
 +config save
 +</​code>​
 +
 +==== Router 4 ====
 +
 +Router 4 base configuration,​ like R2: A simple connected-network router with a default route pointing to R3.
 +
 +<​code>​
 +sysrc hostname=R4
 +sysrc ifconfig_em4="​inet 10.0.2.4/​24"​
 +sysrc ifconfig_em4_ipv6="​inet6 2001:​db8:​2::​4 prefixlen 64"
 +sysrc ifconfig_em3="​inet 192.168.45.4/​24"​
 +sysrc ifconfig_em3_ipv6="​inet6 2001:​db8:​45::​4 prefixlen 64"
 +sysrc defaultrouter="​192.168.45.5"​
 +sysrc ipv6_defaultrouter="​2001:​db8:​45::​5"​
 +ifconfig -l | grep -q vtnet && sed -i ""​ '​s/​em/​vtnet/​g'​ /​etc/​rc.conf
 +service netif restart
 +service routing restart
 +config save
 +</​code>​
 +
 +==== Router 5 ====
 +
 +Router 5 is the central router simulating Internet and low latency link.
 +
 +<​code>​
 +sysrc hostname=R5
 +sysrc ifconfig_em0="​inet 192.168.15.5/​24"​
 +sysrc ifconfig_em1="​inet 192.168.25.5/​24"​
 +sysrc ifconfig_em2="​inet 192.168.35.5/​24"​
 +sysrc ifconfig_em3="​inet 192.168.45.5/​24"​
 +sysrc ifconfig_em0_ipv6="​inet6 2001:​db8:​15::​5 prefixlen 64"
 +sysrc ifconfig_em1_ipv6="​inet6 2001:​db8:​25::​5 prefixlen 64"
 +sysrc ifconfig_em2_ipv6="​inet6 2001:​db8:​35::​5 prefixlen 64"
 +sysrc ifconfig_em3_ipv6="​inet6 2001:​db8:​45::​5 prefixlen 64"
 +sysrc firewall_enable=YES
 +sysrc firewall_script="/​etc/​ipfw.rules"​
 +ifconfig -l | grep -q vtnet && sed -i ""​ '​s/​em/​vtnet/​g'​ /​etc/​rc.conf
 +cat > /​etc/​ipfw.rules <<EOF
 +#!/bin/sh
 +fwcmd="/​sbin/​ipfw"​
 +kldstat -q -m dummynet || kldload dummynet
 +# Flush out the list before we begin.
 +\${fwcmd} -f flush
 +#Create pipes (one for each direction)
 +\${fwcmd} pipe 52 config delay 100ms
 +\${fwcmd} pipe 25 config delay 100ms
 +\${fwcmd} pipe 53 config delay 50ms
 +\${fwcmd} pipe 35 config delay 50ms
 +\${fwcmd} add pipe 25 all from any to any in via em1
 +\${fwcmd} add pipe 52 all from any to any out via em1
 +\${fwcmd} add pipe 35 all from any to any in via em2
 +\${fwcmd} add pipe 53 all from any to any out via em2
 +#We don't want to block traffic, only shape some
 +\${fwcmd} add allow ip from any to any
 +EOF
 +ifconfig -l | grep -q vtnet && sed -i ""​ '​s/​em/​vtnet/​g'​ /​etc/​ipfw.rules
 +service netif restart
 +service routing restart
 +config save
 +</​code>​
 +
 +===== OpenVPN =====
 +
 +==== CA and certificates generation ====
 +
 +All these step will be done on R2 (OpenVPN server & CA)
 +
 +Start by copying easyrsa3 configuration folder and define new configuration file:
 +<​code>​
 +cp -r /​usr/​local/​share/​easy-rsa /​usr/​local/​etc/​
 +setenv EASYRSA /​usr/​local/​etc/​easy-rsa
 +</​code>​
 +
 +Initialize PKI and generate a DH:
 +<​code>​
 +easyrsa init-pki
 +easyrsa gen-dh
 +</​code>​
 +
 +Build a root certificate:​
 +<​code>​
 +[root@R2]~# easyrsa build-ca nopass
 +
 +Note: using Easy-RSA configuration from: /​usr/​local/​etc/​easy-rsa/​vars
 +Generating a 2048 bit RSA private key
 +...............................................+++
 +..................................................................................+++
 +writing new private key to '/​usr/​local/​etc/​easy-rsa/​pki/​private/​ca.key.EvwYAl9tEs'​
 +-----
 +You are about to be asked to enter information that will be incorporated
 +into your certificate request.
 +What you are about to enter is what is called a Distinguished Name or a DN.
 +There are quite a few fields but you can leave some blank
 +For some fields there will be a default value,
 +If you enter '​.',​ the field will be left blank.
 +-----
 +Common Name (eg: your user, host, or server name) [Easy-RSA CA]:
 +
 +CA creation complete and you may now import and sign cert requests.
 +Your new CA certificate file for publishing is at:
 +/​usr/​local/​etc/​easy-rsa/​pki/​ca.crt
 +
 +
 +</​code>​
 +Make a server certificate called R2, R3 and R4.
 +Then client certificate called R1:
 +<​code>​
 +easyrsa build-server-full R2 nopass
 +easyrsa build-server-full R3 nopass
 +easyrsa build-server-full R4 nopass
 +easyrsa build-client-full R1 nopass
 +config save
 +</​code>​
 +
 +==== R2: First OpenVPN server and cert generator ====
 +
 +Create the openvpn configuration file for server mode as /​usr/​local/​etc/​openvpn/​openvpn.conf:​
 +<​code>​
 +mkdir /​usr/​local/​etc/​openvpn
 +cat > /​usr/​local/​etc/​openvpn/​openvpn.conf <<'​EOF'​
 +dev tun
 +tun-ipv6
 +ca /​usr/​local/​etc/​easy-rsa/​pki/​ca.crt
 +cert /​usr/​local/​etc/​easy-rsa/​pki/​issued/​R2.crt
 +key /​usr/​local/​etc/​easy-rsa/​pki/​private/​R2.key
 +dh /​usr/​local/​etc/​easy-rsa/​pki/​dh.pem
 +server 10.0.21.0 255.255.255.0
 +server-ipv6 2001:​db8:​21::/​64
 +keepalive 5 60
 +ifconfig-pool-persist ipp.txt
 +client-config-dir ccd
 +push "route 10.0.2.0 255.255.255.0"​
 +push "​route-ipv6 2001:​db8:​2::/​64"​
 +route 10.0.1.0 255.255.255.0
 +route-ipv6 2001:​db8:​1::/​64
 +'​EOF'​
 +</​code>​
 +
 +Create the Client-Configuration-dir and declare the volatile route to the subnet behind the client R1:
 +<​code>​
 +mkdir /​usr/​local/​etc/​openvpn/​ccd
 +cat > /​usr/​local/​etc/​openvpn/​ccd/​R1 <<'​EOF'​
 +iroute 10.0.1.0 255.255.255.0
 +iroute-ipv6 2001:​db8:​1::/​64
 +'​EOF'​
 +</​code>​
 +
 +Enable and start openvpn and sshd (we will get certificates files by SCP later):
 +<​code>​
 +sysrc sshd_enable=YES
 +sysrc openvpn_enable=YES
 +service openvpn start
 +service sshd start
 +</​code>​
 +
 +And set a password for root account (mandatory for next SCP file copy):
 +<​code>​
 +passwd
 +</​code>​
 +
 +==== R3: Second OpenVPN server ====
 +
 +Create the openvpn configuration file for server mode as /​usr/​local/​etc/​openvpn/​openvpn.conf:​
 +<​code>​
 +mkdir /​usr/​local/​etc/​openvpn
 +cat > /​usr/​local/​etc/​openvpn/​openvpn.conf <<'​EOF'​
 +dev tun
 +tun-ipv6
 +ca ca.crt
 +cert R3.crt
 +key R3.key
 +dh dh.pem
 +server 10.0.31.0 255.255.255.0
 +server-ipv6 2001:​db8:​31::/​64
 +keepalive 5 60
 +ifconfig-pool-persist ipp.txt
 +client-config-dir ccd
 +push "route 10.0.2.0 255.255.255.0"​
 +push "​route-ipv6 2001:​db8:​2::/​64"​
 +route 10.0.1.0 255.255.255.0
 +route-ipv6 2001:​db8:​1::/​64
 +'​EOF'​
 +</​code>​
 +
 +Create the Client-Configuration-dir and declare the volatile route to the subnet behind the client R1:
 +<​code>​
 +mkdir /​usr/​local/​etc/​openvpn/​ccd
 +cat > /​usr/​local/​etc/​openvpn/​ccd/​R1 <<'​EOF'​
 +iroute 10.0.1.0 255.255.255.0
 +iroute-ipv6 2001:​db8:​1::/​64
 +'​EOF'​
 +</​code>​
 +
 +Then get CA and your own certificate from R2
 +<​code>​
 +scp 192.168.25.2:/​usr/​local/​etc/​easy-rsa/​pki/​ca.crt /​usr/​local/​etc/​openvpn
 +scp 192.168.25.2:/​usr/​local/​etc/​easy-rsa/​pki/​dh.pem /​usr/​local/​etc/​openvpn
 +scp 192.168.25.2:/​usr/​local/​etc/​easy-rsa/​pki/​issued/​R3.crt /​usr/​local/​etc/​openvpn
 +scp 192.168.25.2:/​usr/​local/​etc/​easy-rsa/​pki/​private/​R3.key /​usr/​local/​etc/​openvpn
 +</​code>​
 +Enable and start openvpn:
 +<​code>​
 +sysrc openvpn_enable=YES
 +service openvpn start
 +</​code>​
 +
 +==== R4: Third OpenVPN server ====
 +
 +Create the openvpn configuration file for server mode as /​usr/​local/​etc/​openvpn/​openvpn.conf:​
 +<​code>​
 +mkdir /​usr/​local/​etc/​openvpn
 +cat > /​usr/​local/​etc/​openvpn/​openvpn.conf <<'​EOF'​
 +dev tun
 +tun-ipv6
 +ca ca.crt
 +cert R4.crt
 +key R4.key
 +dh dh.pem
 +server 10.0.41.0 255.255.255.0
 +server-ipv6 2001:​db8:​41::/​64
 +keepalive 5 60
 +ifconfig-pool-persist ipp.txt
 +client-config-dir ccd
 +push "route 10.0.2.0 255.255.255.0"​
 +push "​route-ipv6 2001:​db8:​2::/​64"​
 +route 10.0.1.0 255.255.255.0
 +route-ipv6 2001:​db8:​1::/​64
 +'​EOF'​
 +</​code>​
 +
 +Create the Client-Configuration-dir and declare the volatile route to the subnet behind the client R1:
 +<​code>​
 +mkdir /​usr/​local/​etc/​openvpn/​ccd
 +cat > /​usr/​local/​etc/​openvpn/​ccd/​R1 <<'​EOF'​
 +iroute 10.0.1.0 255.255.255.0
 +iroute-ipv6 2001:​db8:​1::/​64
 +'​EOF'​
 +</​code>​
 +
 +Then get CA and your own certificate from R2
 +<​code>​
 +scp 192.168.25.2:/​usr/​local/​etc/​easy-rsa/​pki/​ca.crt /​usr/​local/​etc/​openvpn
 +scp 192.168.25.2:/​usr/​local/​etc/​easy-rsa/​pki/​dh.pem /​usr/​local/​etc/​openvpn
 +scp 192.168.25.2:/​usr/​local/​etc/​easy-rsa/​pki/​issued/​R4.crt /​usr/​local/​etc/​openvpn
 +scp 192.168.25.2:/​usr/​local/​etc/​easy-rsa/​pki/​private/​R4.key /​usr/​local/​etc/​openvpn
 +</​code>​
 +Enable and start openvpn:
 +<​code>​
 +sysrc openvpn_enable=YES
 +service openvpn start
 +</​code>​
 +==== R1: OpenVPN client ====
 +
 +As OpenVPN client, R1 should get these files from R2 and put them in /​usr/​local/​etc/​openvpn:​
 +  * ca.crt
 +  * R1.crt
 +  * R1.key
 +
 +On this lab, scp can be used for getting these files:
 +<​code>​
 +mkdir /​usr/​local/​etc/​openvpn
 +scp 192.168.25.2:/​usr/​local/​etc/​easy-rsa/​pki/​ca.crt /​usr/​local/​etc/​openvpn
 +scp 192.168.25.2:/​usr/​local/​etc/​easy-rsa/​pki/​issued/​R1.crt /​usr/​local/​etc/​openvpn
 +scp 192.168.25.2:/​usr/​local/​etc/​easy-rsa/​pki/​private/​R1.key /​usr/​local/​etc/​openvpn
 +</​code>​
 +
 +Configure openvpn as a client:
 +
 +<​code>​
 +cat > /​usr/​local/​etc/​openvpn/​openvpn.conf <<'​EOF'​
 +client
 +dev tun
 +#Declare servers with bigger latency first
 +remote 192.168.25.2
 +remote 192.168.35.3
 +remote 192.168.45.4
 +remote-cert-tls server
 +ca ca.crt
 +cert R1.crt
 +key R1.key
 +'​EOF'​
 +</​code>​
 +
 +Enable and start openvpn:
 +<​code>​
 +sysrc openvpn_enable=YES
 +service openvpn start
 +</​code>​
 +===== Testing =====
 +
 +====  unpatched OpenVPN ====
 +
 +Test the current setup by checking if with unpatched OpenVPN it's works but connect only to the first declared OpenVPN server (192.168.25.2):​
 +<​code>​
 +[root@R1]# grep openvpn /​var/​log/​messages
 +Jun 11 14:38:41 R1 openvpn[2499]:​ OpenVPN 2.3.11 amd64-portbld-freebsd10.3 [SSL (OpenSSL)] [LZO] [MH] [IPv6] built on May 31 2016
 +Jun 11 14:38:41 R1 openvpn[2499]:​ library versions: OpenSSL 1.0.1s-freebsd ​ 1 Mar 2016, LZO 2.09
 +Jun 11 14:38:41 R1 openvpn[2500]:​ UDPv4 link local (bound): [undef]
 +Jun 11 14:38:41 R1 openvpn[2500]:​ UDPv4 link remote: [AF_INET]192.168.25.2:​1194
 +Jun 11 14:38:42 R1 openvpn[2500]:​ [R2] Peer Connection Initiated with [AF_INET]192.168.25.2:​1194
 +Jun 11 14:38:45 R1 openvpn[2500]:​ TUN/TAP device /dev/tun0 opened
 +Jun 11 14:38:45 R1 openvpn[2500]:​ do_ifconfig,​ tt->​ipv6=1,​ tt->​did_ifconfig_ipv6_setup=1
 +Jun 11 14:38:45 R1 openvpn[2500]:​ /​sbin/​ifconfig tun0 10.0.21.6 10.0.21.5 mtu 1500 netmask 255.255.255.255 up
 +Jun 11 14:38:45 R1 openvpn[2500]:​ /​sbin/​ifconfig tun0 inet6 2001:​db8:​21::​1000/​64
 +Jun 11 14:38:45 R1 openvpn[2500]:​ add_route_ipv6(2001:​db8:​2::/​64 -> 2001:​db8:​21::​1 metric -1) dev tun0
 +Jun 11 14:38:45 R1 openvpn[2500]:​ Initialization Sequence Completed
 +[root@R1]# ping -c 4 10.0.2.2
 +PING 10.0.2.2 (10.0.2.2): 56 data bytes
 +64 bytes from 10.0.2.2: icmp_seq=0 ttl=64 time=199.854 ms
 +64 bytes from 10.0.2.2: icmp_seq=1 ttl=64 time=199.922 ms
 +64 bytes from 10.0.2.2: icmp_seq=2 ttl=64 time=199.921 ms
 +64 bytes from 10.0.2.2: icmp_seq=3 ttl=64 time=199.925 ms
 +
 +--- 10.0.2.2 ping statistics ---
 +4 packets transmitted,​ 4 packets received, 0.0% packet loss
 +round-trip min/​avg/​max/​stddev = 199.854/​199.906/​199.925/​0.030 ms
 +</​code>​
 +
 +====  Compatibility Matrix ====
 +
 +===  Methodology ===
 +For this test, we start by:
 +  - upgrading OpenVPN on R2 (first server) and testing that unpatched R1 client reach to connect to patched OpenVPN server R2
 +  - upgrading OpenVPN on R1 and testing it can connect to patched OpenVPN server R2
 +  - modifying R1 unpatched OpenVPN configuration configuration by putting R3 (second unpatched OpenVPN server) in first position in the server list and checking that R1 (patched client) can connect to R3 (unpatched server)
 +  - At the end, reverting R1 configuration for reinstallating R2 first, R3 second and R4 in third position.
 +
 +===  Results===
 +
 +^      ^ server unpatched ​      ^ server patched ​        ^
 +| client unpatched ​   | OK    | OK        |
 +| client patched ​   | OK | OK |
 +
 +====  Testing new remote-best-latency option ====
 +
 +Now we still didn't upgrade OpenVPN on the 2 last servers (R3 and R4) but we add remote-best-latency option on client:
 +<​code>​
 +service openvpn stop
 +echo "​remote-best-latency"​ >> /​usr/​local/​etc/​openvpn/​openvpn.conf
 +</​code>​
 +
 +OpenVPN.conf should be like this one:
 +<​code>​
 +client
 +dev tun
 +#Declare servers with bigger latency first
 +remote 192.168.25.2
 +remote 192.168.35.3
 +remote 192.168.45.4
 +remote-cert-tls server
 +ca ca.crt
 +cert R1.crt
 +key R1.key
 +remote-best-latency
 +</​code>​
 +
 +Then we start openvpn for checking the new behavior:
 +<​code>​
 +[root@R1]/​usr/​local/​etc/​openvpn#​ openvpn openvpn.conf
 +Fri Jun 17 07:04:44 2016 OpenVPN 2.3.11 amd64-portbld-freebsd10.3 [SSL (OpenSSL)] [LZO] [MH] [IPv6] built on Jun 16 2016
 +Fri Jun 17 07:04:44 2016 library versions: OpenSSL 1.0.1s-freebsd ​ 1 Mar 2016, LZO 2.09
 +Timeout reached
 +Timeout reached
 +Timeout reached
 +Timeout reached
 +Timeout reached
 +Timeout reached
 +Timeout reached
 +Timeout reached
 +Timeout reached
 +Timeout reached
 +Timeout reached
 +Fri Jun 17 07:04:54 2016 UDPv4 link local (bound): [undef]
 +Fri Jun 17 07:04:54 2016 UDPv4 link remote: [AF_INET]192.168.45.4:​1194
 +Fri Jun 17 07:04:54 2016 [R4] Peer Connection Initiated with [AF_INET]192.168.45.4:​1194
 +Fri Jun 17 07:04:56 2016 TUN/TAP device /dev/tun0 opened
 +Fri Jun 17 07:04:56 2016 do_ifconfig,​ tt->​ipv6=1,​ tt->​did_ifconfig_ipv6_setup=1
 +Fri Jun 17 07:04:56 2016 /​sbin/​ifconfig tun0 10.0.41.6 10.0.41.5 mtu 1500 netmask 255.255.255.255 up
 +Fri Jun 17 07:04:56 2016 /​sbin/​ifconfig tun0 inet6 2001:​db8:​41::​1000/​64
 +add net 10.0.2.0: gateway 10.0.41.5 fib 0
 +add net 10.0.41.1: gateway 10.0.41.5 fib 0
 +Fri Jun 17 07:04:56 2016 add_route_ipv6(2001:​db8:​2::/​64 -> 2001:​db8:​41::​1 metric -1) dev tun0
 +add net 2001:​db8:​2::/​64:​ gateway tun0 fib 0
 +Fri Jun 17 07:04:56 2016 Initialization Sequence Completed
 +</​code>​
 +
 +We notice timeout message: 2 OpenVPN servers are still not upgraded and still didn't support the OpenVPN-latency-ping packets, then they timeout.
 +But the client no more connect to the first declared server but on R4 here (why?).
  
documentation/examples/validating_openvpn_s_low-latency_servers_selection_patch.txt ยท Last modified: 2017/07/07 00:26 (external edit)